Looking for a ported Throttle body, and a ported intake manifold for a 95 GS n/t. Will pay alot! Let me know if you are getten rid of them. Thanks

I have a bare ported to 57MM throttle body without the shaft, butterfly, and sensors for $45 shipped to your door. You can take it to a machine shop to make you a new butterfly plate for it and use your stock shaft & sensors from your old throttle body. Let me know.
MiztahfooLish...
'95 RS (16.72 @ 84 mph)
'03 ALTIMA 3.5 SE V6 5spd (14.3 @ 95 mph w/ 2.1 60 foot)

CAI w/ K&N, Greddy EVO catback exhaust, 2.5" testpipe, OBX header & downpipe, shortshifter, E.S. motormounts, Accel 8.5mm wires, Blitz rear, '99 conversion, diamondplatemats, Powerslot rotors, M3 LED mirrors, JEEP 60mm TB, ported intake manifold & MORE

I have a factoty manifold, for 50 plus shipping, I started to port and polish it but got lazy. bring it to a shop and they'll do it and you'll have no down time. If you really want I can get it ported out buy me, but it'll save u time and money to do get it done urself.

i have a 60mm jeep throtlle body for 160 shipped....complete with sensors, shaft, butterfly, just bolt on and rip it

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Done deal, Let me know where to send money. Still looking for intake manifold. Im thinking about your 50$ one Silentkilpz. Check your e-mail, get back to me asap.

wait. I heard that those Jeep TBs don't work? Spring problems or something. If its a jeep one, then I don't think i could get it to work.

ill even sell you the one off of my car...works perfect!....i can take some pictures or something to assure you....

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

sure, take some pics. I just heard from a guy that its impossible for the jeep tbs to work. People have tried, but to avail.

the jeep ones work great i've had one on my car for awhile and love it
stage 4 clutch, aluminum flywheel, solid motor mounts, Phantom grip, phantom boost, egt, a/f, oil psi, apexi TT, Jeep TB, Star stage 2 with custom 3 inch downpipe out passenger side bumper, custom ground kit, falcon azenis, 2 inch drop, eibach camber kit, crank scrapper,AEM cam gear, short shifter, and some other stuff

>sure, take some pics. I just heard from a guy that its
>impossible for the jeep tbs to work. People have tried, but to
>avail.

I dont know whats that "guy" talking about, I followed MetalJim's JeepTB write up and it fired up the first time without no problems.


MiztahfooLish...
'95 RS (16.72 @ 84 mph)
'03 ALTIMA 3.5 SE V6 5spd (14.3 @ 95 mph w/ 2.1 60 foot)

CAI w/ K&N, Greddy EVO catback exhaust, 2.5" testpipe, OBX header & downpipe, shortshifter, E.S. motormounts, Accel 8.5mm wires, Blitz rear, '99 conversion, diamondplatemats, Powerslot rotors, M3 LED mirrors, JEEP 60mm TB, ported intake manifold & MORE

lol well if it works on your guyz carz it better work for mine lol If it mounts up to my stock Intake manifold with no probs then i'll be good.

yup dats why metaljim's jeep tb dont even work w/ spring tension problems ..many many people have had horrible times w/ this tb .. it aint worth shit imo just get the mp 60mm one

____________________________________

Another BANNED asshole.

Ill sell you a complete intake manifold. Upper and lower. Nothing wrong with it. I just bought a spare for my 8 injector set up.

40 plus shipping.

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for