i have spent all day searching queens, new york and no one carries the damn bolts. so if there's anyone who has (8)M10x40x1.25 bolts with a grade of 10.9 and (40)hardened flat washers along with (8)split lock washers, i ll paypal you for them but it has to be a 10.9 grade. thanks.

just order them from a bolt store like i did. it'll cost ya like 3 bucks plus 5 bucks for shipping. Good luck.


WTB:
--bolt on turbo kit (star, hahn, etc.)
--rear drum to disc set up
--internals
---------------HOLLA!!!

>i have spent all day searching queens, new york and no one
>carries the damn bolts. so if there's anyone who has
>(8)M10x40x1.25 bolts with a grade of 10.9 and (40)hardened
>flat washers along with (8)split lock washers, i ll paypal you
>for them but it has to be a 10.9 grade. thanks.

I have the bolts.. I looked everywhere for them too. When I did finally find them I bought extras. I'm not sure what grade bolt they were, but they were the best I could find. I think I used all the washers, but they aren't as hard to find.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

are you in new york? does the bolt have numbers on the head like 8.8 or 10.9? or does it have 3 or even 6 lines? if it either have the lines or an 8.8, replace them, they are not as strong. i learned a lot about them on that day of searching but still no bolts. find out what you got left and let me know. thanks

>>i have spent all day searching queens, new york and no one
>>carries the damn bolts. so if there's anyone who has
>>(8)M10x40x1.25 bolts with a grade of 10.9 and (40)hardened
>>flat washers along with (8)split lock washers, i ll paypal
>you
>>for them but it has to be a 10.9 grade. thanks.
>
>I have the bolts.. I looked everywhere for them too. When I
>did finally find them I bought extras. I'm not sure what
>grade bolt they were, but they were the best I could find. I
>think I used all the washers, but they aren't as hard to
>find.

The kit from IAP costs a little more but it's quality stuff
http://www.iapdirect.com/item.asp?invid=66


95ESI-intake,borla,sportlines,kyb,tsw
more on the way

Dude...This is soooo easy.

Just go to google...write "metric bolt"...and call the companies that come up...make an order...and then they'll ship it to you.

I did this...it cost 9 bucks (including shipping) and I got it in a couple of days.

I tried to look for the company i used, but i deleted all their emails because it was so long ago.

Good luck.


WTB:
--bolt on turbo kit (star, hahn, etc.)
--rear drum to disc set up
--internals
---------------HOLLA!!!