I could trade one of my custom made turbomanifold, made with the turbo flange of you choice, with or without a 1/8 NPT EGT sensor hole and with our without an external wastegate it's a value up to $325

In exchange I'm looking for a 420a INTAKE Crane Camshaft #16 or #18
you could buy them in single unit for around $175-200 and save the difference

I could pay shipping both ways
Any taker ?

Alain

the offer is still valid

Alain

if i wasnt broke, id buy the cam and trade ya, but heres a bump

somebody that is going turbo, just buy the cam. alain makes nice manifold I hear and you'll save some money! Flange of your choice.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

several 2gnt cars are running with one of my manifolds
including rxr_eclipse and tim97gs

the offer is still open

Alain

i need a turbo manifold but do not have a cam. How much cash do you want?

>i need a turbo manifold but do not have a cam. How much cash
>do you want?

My manifold are custom made when I have an order for one
basic price is $275
extra are EGT sensor hole on a metal ring welded on runner 4 $25
external wastegate $25 and you need to send me the wastegate flange that you need to use
shipping is a fixed $25

Now I know that I have close to zero chances that somebody will have only an intake cam of the right size and willing to trade
but like I wrote you could buy for much less than the cost of the manifold
and once you have it I will trade you the manifold of your choice for it and you save at least $75 on the manifold or more, I have my cam for the 2.4 engine and everyone is happy

doing a manifold is more time consumming than money consumming I'm on a tight budget because right now I don't have a job I can't afford to spend cash on a cam but I can afford to pay for the raw material of one of my manifold and weld one to the taste and need of the trader

Alain

dude, i will so do this trade with you. Exactly which cam do you need so i can order it and get it to you asap. I'll get back to you more about everything but wanted to let you know i will do this trade

winter project: custom t3/t4 turbo and some others

mitsuman check your pm

Alain

I'm really interested in buying the manifold. i need it for a t3 turbo. So with the egt sensor $325 shipped? When can you have it built for me?

For the momment the offer is considered closed
Mitsuman297 is working on finding a cam for the trade

Please stop emailing me

if the deal doesn't work I will post a new message here

Alain