OK guys here it goes. This Picture is of parts i have out and ready to be shipped. i know the pic isnt that clear so anyone looking for a close up just drop em a line via email.

Please leave ZIP codes in posts so i can get you guys and gals accurate shipping prices.



I have the other speaker grill for driver door but was ripped off so the pops that held it in place are broken.

Thanks again for the understanding guys. Remeber i also have a 98 talon esi with parts (no motor) and a 90 eclipse ES (Motor no tranny)

These cars have been totalled so most exterior parts are no good. But i do have some so dont be afriad to ask. Ill be adding new pics as i take them.

-Partsman

i also have the mirrors and driver door in same red as wing. -Partsman

How much for the door panels and how much for the armrest and change holder under it? Pretty much just the parts i need for the arm rest swap into an RS. Thanx.

$50 shipped for the jack, lug wrench and tail light center piece? Let me know jerseystyle2000@yahoo.com

Allan
2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)

Member# 1980

do you have both front fender wells to sell? if i got them, how much

>do you have both front fender wells to sell? if i got them,
>how much

The one has some rub from the wheel, so give me a fair offer and there yours. I can get you close ups if you would like np. Thanks -Partsman

>How much for the door panels and how much for the armrest and
>change holder under it? Pretty much just the parts i need for
>the arm rest swap into an RS. Thanx.

Sorry tosay i dont have the armrest equipment from vehicle.

For the door panel ill except $60 for both + shipping need your Zip.

Thanks for inquiring -Partsman

Got a gear shifter for a manual transmission n/t car? (the piece you would cut or modify to make a short shifter). Area code 78705.

Thanks!

>Got a gear shifter for a manual transmission n/t car? (the
>piece you would cut or modify to make a short shifter). Area
>code 78705.
>
>Thanks!
Im not sure of the differance from the nt and t vehicles. If anyone could help me out here it would be greatly appreciated. I have the entire shift linkage set up from the 96 GST turbo but the 98 esi is Auto. Thanks Partsman

turbo and NT shifters are the same, i have a gsx shifter on my car right now...sell it to tha man!

-----------------------------------------
2011 Nissan Xterra Pro-4x

2007 Kawasaki Ninja 650R

1996 Mitsubishi Eclipse RS-NX 75 shot, AEM CAI, P&P t/b and intake mani-SOLD

1964 Buick Electra 225-all original, all power options, 325hp, 445ft/lbs tq

>turbo and NT shifters are the same, i have a gsx shifter on
>my car right now...sell it to tha man!

woohoo! =)

Got a price for me, Partsman Sir?

>>turbo and NT shifters are the same, i have a gsx shifter on
>>my car right now...sell it to tha man!
>
>woohoo! =)
>
>Got a price for me, Partsman Sir?

$8 + shipping but i need your zip.

let me know _ Partsman

>$8 + shipping but i need your zip.

SOLD Sir!

Zip is 78705, heck just drop it in one of those USPS Priority Mail thingies. Seriously - whatever works for you, works for me. Let me know how you would like payment when you figure out the total cost and I'll get the money to you ASAP.

My e-mail/MSN is Raven_457 <@> hotmail.com if you need to reach me off list.

*edit - transaction finalized/completed via AOL IM

yeah i would like a close up on the fender wells. did u say u had both of them? also it will fit an rs right?just making sure

parts man!?!? i swear to god you are fuggin cool. keep the part out cars commin!! How much for the side marker bulb holders? my holders are broken out so i just need a couple inches of wire and the holder itself. that, and the windshield wiper fluid bottle cap thingy. shipped to 97870

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

Speaker brackets for the front door panels? 14471. Let me know, as do u happen to have a washerfluid cap? Thanks.

>Speaker brackets for the front door panels? 14471. Let me
>know, as do u happen to have a washerfluid cap? Thanks.

Yes i do juet let me know what they are worth to ya and we can strike a deal. As for the fluid cap i do have one but with a few people wanting it ima bid it off. Starting at $2 Thanks -Partsman

>parts man!?!? i swear to god you are fuggin cool. keep the
>part out cars commin!! How much for the side marker bulb
>holders? my holders are broken out so i just need a couple
>inches of wire and the holder itself. that, and the windshield
>wiper fluid bottle cap thingy. shipped to 97870

Sorry man no good on the from lights. Im going to post some ext pictures of cars here tonight. I do have the washer cap but i have a few differant people wanting it so as all things highest bidder takes it since i only have one. Ima start it off at $2. Thanks -Partsman

5 bucks shipped for the brackets.... i dont need them, just want to make my car look cleaner

let me know, my SN is cman2770

so you have the engine bay fuse box cover from the gst?


Edit: Not all dsm's suck, just mine

hey parts man just wondering if you can help me out with any of these parts

egr seloniod w/ harness
front 4 turning signal bulb sockets
hood
inside fuse cover
driver side window and lock control harness
headliner if you have a sunroof
passanger side door switch (the one that tells when the door is open or closed)
rear speaker pods

my zip is 01843, if you can help me out with any of these it would be greatly appriciated

>hey parts man just wondering if you can help me out with any
>of these parts
>
>egr seloniod w/ harness
>front 4 turning signal bulb sockets
>hood
>inside fuse cover
>driver side window and lock control harness
>headliner if you have a sunroof
>passanger side door switch (the one that tells when the door
>is open or closed)
>rear speaker pods
>
>my zip is 01843, if you can help me out with any of these it
>would be greatly appriciated
Im gogint o get you a list together, but i have a dum question. whats a EGR seloniod? Thanks -Partsman

I need some 2g door handles if you have them!?!? danielkmog@hotmail.com

all show, no go!

i need the power mirror trim piece and the center vent trim

email me with price pensport8@hotmail.com

if you mean the one on the right side then yes i do. Asking $8 + shipping. Let me know. -Partsman

>if you mean the one on the right side then yes i do. Asking
>$8 + shipping. Let me know. -Partsman

Did you mean the fuse box cover is 8 bucks or did you just ignore my question ?


Edit: Not all dsm's suck, just mine

>5 bucks shipped for the brackets.... i dont need them, just
>want to make my car look cleaner
>
>let me know, my SN is cman2770

I understand man but id rather sell tham a whole. If your will to pay me $7 + shipping i would have no problem seperating them.
Thanks again -Partsman

Here is some more pics including out side.

As far as exterior i have.
================================
96 GST
================================
Drivers Door
Driver/Passenger Mirrors (Power)
Rear Low Lying Wing w/led
Rear Bumper Cover
Hatch w/o glass
Sunroof

================================
98 Talon ESI
================================
Driver Door
Driver Mirror

Also one full set of Eagle Wheels (will have pic soon)

The black Interior around Heatvents and radio cover are sold.



Thanks again guys -Partsman

this is a picture of the seloniod highlited





if thats what you meant by thing on the right then yes 8+ shipping is great. I neeed the harness that plugs into it also.if you can let me know about the rest of the list that would be great

>this is a picture of the seloniod highlited
>
>
>
>
>
>if thats what you meant by thing on the right then yes 8+
>shipping is great. I neeed the harness that plugs into it
>also.if you can let me know about the rest of the list that
>would be great
Its 1 am here so i cant go out and see whats up but ill have the list for you tomorrow night thanks for your patience -Partsman

i got quoted 45cents from the dealer for that cap!

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

hey i need to get both of the front fenders wells? about 25 bucks? shipped to 30277

heh. i need those too but go for it. i need lots of things now that i think of it.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

Ok guys, This gets out of hand fast i forgot about this from the last time. I cant keep up with the ennourmouse amount of feedback since i am getting feedback in 3 differant places. (posts , email , Pm's)

I would prefer to get questions via Email from everyone since this would be easier for me to keep organized. And plz Email me and add in there youe 1gnt name so i can link them together. The only problem is that the post will disappear into thread pergatory. So if you wouldnt mind givin a bump while sending me your Email.

Importsfanatic@suscom.net

On another note. Guys i understand that some of these parts you are looking for might be a less than dollar part. However its not worth it for me to travel all the way to the post office for a little part. Not that i dont want to help the little orders either however. I would hope people would understnd if i put a $2 limit to any order. If not than so be it but I am sorry. I am trying to help everyone out here that i can. I also Make custom shift boots. multi colors with graphics of your choice. I have sold a few on here and have received great reveiws. If anyone is interested let me know.

Thanks again for your time and interest. -Partsman

Thx for the PM partsman but I just found one locally today .


Edit: Not all dsm's suck, just mine

>Thx for the PM partsman but I just found one locally today
> .
>
>
>Edit: Not all dsm's suck, just mine

Sorry to hear that man maybe next time. -Partsman

Bump!!!

Purchased a 99 eclipse OZ model and factory tall turbo-type spoiler was stolen off of the back. I purchsed a silver painted, aluminum, Meagan Racing spoiler off of the internet and paid good money for it but I have decided that I would rather find a factory tall spoiler if possible. Does anyone have one that they would like to sell or trade straight across for the racing spoiler? The spoiler is brand new and has never been installed on car. Still have the paperwork and an extra set of stickers that came with it. My 99 is black so would be nice if someone has a black one but not too important. I can paint if needed. Any help or info would be greatly appreciated. Thanks so much and God bless/// Chuck

99 oz special race model. black leather, an upgraded exhaust system, oz f1 racing wheels, and factory white faced guages

hey parts man keep me updated if you ever get a 95-99 rs/gs in with a manny trans. thanks

Mods:
CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit

Ill keep my eyes open. I Bought these cars from a local guy thinking i would make my money back but so far im still out a few hundred so im not looking to buy anymore cars unles something changes. But the guy i got it from has some cars ill check with him for ya. I posted a nother place you could try in Hazelton PA. thanks for your inquiry's though i wish i could do more for ya.

Oh and BTW i seen another post about a guy ripping people off, Thats just no good. So here is all ionformation about me so you guys can be assured im not here for that Reason.

Name : John Dailey
Addy: 12575 Laurel Rd.
Brogue , PA 17309
Phone: 717-927-6001 -Home
717-877-4420 -Cell

um, im 24 birthday 9/27/78 so 25 soon Im married (5yrs oct. 3rd) and have a child on the way (to be born Jan. 27th) im a dept. Manager at local Ace Hardware store.

I also have a Aftermarket Parts business which was shut down on me but i still have dealerships. www.gforceperformance.com.

And i guess since im being Totally honest i guess i should let everyone know I dont drive a eclipse. I drive a turbo'd Integra 13.4 @ 109 mph which you can see at

http://www.gforceperformance.com/teamgf/memberpage.asp?mname=johnd

There ya have it -Partsman in a nut shell. Thanks to everyone who has inquired about the parts i have.

bump

I need a drivers side door handle...=(

>I need a drivers side door handle...=(

hows $15 shipped sound Thanks -Partsman

Did you still have any door panels left? thanks

DSM\'s are just like women, fun to ride but expensive to take care of.

>Did you still have any door panels left? thanks

Sure do i have 2 grey panels left asking $55 Shipped. Thanks -Partsman

I live in CA92882, you can email me about the door panels here polopnoi07@hotmail.com and with any other info.

DSM\'s are just like women, fun to ride but expensive to take care of.

Hey Partsman,

If this deal has or does fall through, I'm interested. I'll e-mail you to follow up.

Jya...matta...

matsumura69@hotmail.com

Hey Partsman,

I just sent you an e-mail.

Jya...matta...

matsumura69@hotmail.com

Do you have the driver side seat tilt handle?

Hey partsman! Here is a list of stuff I need. all for a 2g

Radio bezel
the oval shaped piece thats behind the door handle.
The vertical rod (about 2-3 inches tall) in the passenger side door that is part of the door handle assembly. It moves when you open the door using the handle inside, and its located inside the door near the rear of the door.
and i need the bezel on the back of a 95 talon, its where the licence plate goes.

Let me know what you get and how much shipped to 48187. I need more stuff too, but thats all i can think of right now.

____________________________________________________
four nails four corners four riders and four horses

>Hey partsman! Here is a list of stuff I need. all for a 2g
>
>Radio bezel
>the oval shaped piece thats behind the door handle.
>The vertical rod (about 2-3 inches tall) in the passenger side
>door that is part of the door handle assembly. It moves when
>you open the door using the handle inside, and its located
>inside the door near the rear of the door.
>and i need the bezel on the back of a 95 talon, its where the
>licence plate goes.
>
>Let me know what you get and how much shipped to 48187. I need
>more stuff too, but thats all i can think of right now.

I do have the door cups. I have people bidding on these via email so if you are interested plz email about these. Right now they are at $17 shipped for set.

i also have the bezel and the rod. Hows $10+ shipping.

Thanks -Partsman

Hey partsman by any chance do you have the trunk cover or privacy cover? 91402

>Hey partsman by any chance do you have the trunk cover or
>privacy cover? 91402

Im not sure if the onei have is sold yet I am waiting a responce. Ill get back to ya. Thanks _Partsman

cool, whats your paypal address? ill send the money to you right away.

____________________________________________________
four nails four corners four riders and four horses

>cool, whats your paypal address? ill send the money to you
>right away.

Importsfanatic@suscom.net = Paypal

>Do you have the driver side seat tilt handle?

Yes i do. Are you lokoing for just the plastic part or the whole handle? I'll sell either or both for $5 + shipping. thanks -Partsman

Hey partsman I need the bracket that u connect the center section of the front bumper too. Its about 5 or 6 bolts that go from the front bumper to the bracket. If you dont understand let me know maybe I can post a pic. I need this asap because i cant mount my new front bumper without it. Its only held on by the fenders and zip ties lol.

Edit: Not all dsm's suck, just mine

If you look at that bracket that surrounds the hood latch ,in the middle where the center of the front bumper bolts up to, Thats what I need, And I need it asap !!

thx
I can paypal u a few bucks right now.


Edit: Not all dsm's suck, just mine

>
>
>If you look at that bracket that surrounds the hood latch ,in
>the middle where the center of the front bumper bolts up to,
>Thats what I need, And I need it asap !!
>
>thx
>I can paypal u a few bucks right now.
>
>
>Edit: Not all dsm's suck, just mine

Yes i do make me a fair offer and its yours. Thanks -Partsman

>Yes i do make me a fair offer and its yours. Thanks -Partsman

15 shipped. I will paypal you asap as long as you can ship it out right away.


Edit: Not all dsm's suck, just mine

>
>>Yes i do make me a fair offer and its yours. Thanks
>-Partsman
>
>15 shipped. I will paypal you asap as long as you can ship it
>out right away.
>
>
>Edit: Not all dsm's suck, just mine

Sounds good i can ship, Thursday at 12 noon. Paypal =

importsfanatic@suscom.net

Thanks -Partsman

OK ill buy both for $5 + shipping, can you tell me your paypal account.

Can you send me a pic, so I can see that I am buying the right parts.

ferdiej@hotmail.com

Thanks

>OK ill buy both for $5 + shipping, can you tell me your
>paypal account.
>
>Can you send me a pic, so I can see that I am buying the right
>parts.
>
>ferdiej@hotmail.com
>
>Thanks

Paypal = Importsfanatic@suscom.net

do you have the plactic clip for the head mirror, passenger side?

How much by the way for the tilt handle shipped?? and if you can add the clip.

Thanks

>
>do you have the plactic clip for the head mirror, passenger
>side?
>
>How much by the way for the tilt handle shipped?? and if you
>can add the clip.
>
>Thanks

If just the clip ill throw it in for free cause im a nice guy like that. thanks Partsman

Just sent you the payment for the Tilt handle.

Do you have a grey console cup holder ash? how much shipped?

Thanks

>
>Just sent you the payment for the Tilt handle.
>
>Do you have a grey console cup holder ash? how much shipped?
>
>Thanks
>
>
>
>
>
No man sorry i dont. Partsman

Partsman, do you have the interior cover for the sun roof?

How much shipped?

Thanks

Guys my Aim is Importsfanatic also if you can catch me online but i am busy so good luck Thanks -Partsman

Hey parts man, Im looking for the switch assembly to the left of the steering wheel...I believe its the power mirrors and something else, (fogs?)....anyways, I want that whole switch thing, how much?

Shipping to: L6S 1S8 (canada) or 33774 (Florida)

Thanks, Sea

>Hey parts man, Im looking for the switch assembly to the left
>of the steering wheel...I believe its the power mirrors and
>something else, (fogs?)....anyways, I want that whole switch
>thing, how much?
>
>Shipping to: L6S 1S8 (canada) or 33774 (Florida)
>
>Thanks, Sea

Im at work right now but when i get home ill check it out for ya to see if i have it thanks partsman

hey do you have another one of those front brackets, the one in the middle of the front bumper under the hood, i need one.

>hey do you have another one of those front brackets, the one
>in the middle of the front bumper under the hood, i need one.

Sorry man i found i actually dont have one. Sorry Partsman

hey, sorry to bring back this long ass post but i was wondering if you might have the driver's side foglight cover. You still owe me that one but ill be glad to pay for shipping. This guy is awesome, parts get there in 3 days or less.

Hey-didn't read all the posts-but do you still have the center consloe-if so lemme know

If you have a driver side outside door handle i definitely want it... email me at bluewrangler2002sport@hotmail.com and i'll send the paypal out to you immediately

>OK guys here it goes. This Picture is of parts i have out and
>ready to be shipped. i know the pic isnt that clear so anyone
>looking for a close up just drop em a line via email.
>
>Please leave ZIP codes in posts so i can get you guys and gals
>accurate shipping prices.
>
>
>



Do you happen to have the left and right rear lower arms, the ones where the sway bar mounts to. I need a set to install a rear sway bar. Also, how much for the rear brake calipers and caliper mounting assemblies.

I'm in CA 91406. Thanks.

Armand

you don't happen to still have the center vent assy. with all the buttons and the trim to go around it...do you?...also, I'm still trying to get some money together for the shift boot...

...I'll be getting a B&M SS soon...so I may have to wait, unless you have anyone else ordering one for that same shifter from you (to get the measurements and all)...THANX A BUNCH!!!

William 'Tha.Will' McGroarty

~*Roary*~
Sick Skillz