#20834, "FS: all the stuff you need to make your HRC stage 1 a stage 2..."
yeah. i'm getting a FMIC from HRC later this week. things that i will be selling:
1. a 1G SMIC. got it off of ebay for $80. it had a few bent fins, the input/output tubes weren't exactly round, so i did the best that i could to fix it. there was a hole in one of the pipes so i used some high tempature epoxy to seal it up. doesn't leak anymore, i've tested it.
2. ALL of the piping/hoses/clamps needed to install it. i will be including the brackets to put it under your bumper too. the piping cost me $200, it's 2" press bent. is a few sections of the old stage 1 piping. i kinda screwed up mounting the 1G SMIC whoever buys it will have to deal with the weird angle that the pipes were designed for (it's not 100% vertical), but it's not that bad. i will get pics when i get my car back from the body shop tomorrow, it's getting the bumper finally painted.
3. a 1G OEM BOV with a flange to get it to bolt to the "stage 1" HRC piping. this BOV is pretty good sounding. i bought it at the shootout for $40 and bought a flange on ebay for $20, made a gasket for it and tried it out one day instead of my RFL just because i was bored.
4. a Hallman manual boost controller. i have no use for this anymore. i've upgraded to an electronic controller. i think it was $80 or so on Mach V.
so to add up everything i paid for it, it would come to around $420.
on this setup, with about 85* outside tempatures, high humidity, a free-flowing (no cat) 2.5" exhaust, .95-.96 or so for oxygen sensor voltages, and 15 psi of boost it takes about 6-8 seconds at full boost under heavy load (spooling it up a hill in 4th gear around 5000 rpm's) to reach 1600 degrees. not bad for a stock 1G intercooler with a crap in the way and not-so-great baffling/airflow IMO.
give me an offer. i'd like to keep all of the stuff together so i don't have to deal with shipping stuff every which way.
#20973, "RE: FS: all the stuff you need to make your HRC stage 1 a stage 2..." In response to Reply # 1 Aug-21-03 05:08 PM by ner947
bump...
i know people like pictures. so here are some.
EDIT: oh yeah. forgot to say what was happening in that picture... the intercooler was oversprayed by the homo's who painted my bumper today. it's now a greentercooler. still works fine though. and the K&N + HRC intake pipe is not for sale. i kind of use it every day.
Search
Printer-friendly copy
1 User in Chat
