So as some people may have herd, I have the inside info on Callie's Performance Products, working there and all, and part of my pledge to you guys after taking me job in the sales department was to continue to try and further our community , so I am leaving this here and on the Neon's boards because I feel our members should have a shot before another company picks these up. So here is the news. The bad news is we are discontinuing our 420a 2.2L Crank. The good news is my boss wants me to unload these which means I can do a pretty amazing deal on them. We are talking $225 per crank (or cheaper if for some reason you buy them in bulk).
Now one downside to these cranks is they are not finished. They need the timing notches put in them (if you need them) and the mains and pins ground to 10 under and a rough balance. Beyond that they are good to go. Still a really good deal Considering retail on a finished crank is $660. Hit me up on here if you are interested or would like more information and I will try to work a deal out for you. Or Give me a call at work from 1-5pm EST and ask for Steve.
Steve Overmier Sales Callies Performance Products 419-435-2711
97 Talon ESi 14.943@91.35MPH N/A! "If you need someone to provide an itemized build of materials and a flowchart to walk you through every build-related question you will need to answer at each step of the process, you shouldn't be playing with cars. "-Driggs
#119922, "RE: FS: Sick Deal on 2.2L Callie's Cranks" In response to Reply # 1
I've received some requests to update this so here we are. First off I can work with people somewhat on price if that is an issue. Secondly, I have been all over management for getting these timing marks done. We have talked to two different machine shops. One was unable, and the other could do it, but refused the job due to them being extremely busy at the time.
However I have just sold one to one of the guys at Neons.org who says he has a guy who can put in the timing marks. If his machine shop works out I am going to get there number and see if they are willing to finish them up.
Lastly, there is concerns about which rod/piston combination to use. Currently it seems that a stock length rod with a custom piston is the best bet, but I have my tuning shop looking into it to confirm this. I will have no problem talking to Wiseco or JE to get custom pistons ordered for you.
97 Talon ESi 14.943@91.35MPH N/A! "If you need someone to provide an itemized build of materials and a flowchart to walk you through every build-related question you will need to answer at each step of the process, you shouldn't be playing with cars. "-Driggs
#120031, "RE: FS: Sick Deal on 2.2L Callie's Cranks" In response to Reply # 2
Little update, I can do these as is for $150 + shipping. Let me know. Not sure on eta or pricing with notches, but looking like it will still be some time out for that with more than likely around the $300 mark.
97 Talon ESi 14.943@91.35MPH N/A! "If you need someone to provide an itemized build of materials and a flowchart to walk you through every build-related question you will need to answer at each step of the process, you shouldn't be playing with cars. "-Driggs
#120034, "RE: FS: Sick Deal on 2.2L Callie's Cranks" In response to Reply # 3
Originally posted by Fotowntalon Little update, I can do these as is for $150 + shipping. Let me know. Not sure on eta or pricing with notches, but looking like it will still be some time out for that with more than likely around the $300 mark.
For $150 + shipping, I might get one just for shits and grins.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#120035, "RE: FS: Sick Deal on 2.2L Callie's Cranks" In response to Reply # 4
Let me know. I don't mind working on price or other things with 2GNT brethren (same goes for JE/Wiseco pistons is anyone is interested =P)
97 Talon ESi 14.943@91.35MPH N/A! "If you need someone to provide an itemized build of materials and a flowchart to walk you through every build-related question you will need to answer at each step of the process, you shouldn't be playing with cars. "-Driggs
Search
Printer-friendly copy
1 User in Chat
97 Talon ESi 14.943@91.35MPH N/A!
