Manifold only, no coolant lines, No turbo, NO downpipe, No gaskets, NO wastgate. I will leave the heat wrap on it.

700.00 shipped

There is 800.00 just in 304SS here. Thats not counting the wrap, welding materials, or the 40 hours of welding I put into it.

This will not crack, going from a log to this manifold with a t3/t04E turbo I saw a 500RPM improvement on spool up.

Manifold is 16" equal length devided twin scroll t3 flange. Runners are pairs according to firing pattern to take advantage of the twin scroll feature of a devided T3 turbine housing. This will work just find with a standard t3 housing as well.

If using a t3 housing with 5 bolt discharge flange you will need to clearance the turbo housing at the flange for the the starter.

You cannot use the factory heater steel lines due to clearance.
Pusher fans are required.
Manifold will fir a t3/t04E like used in the Star kit. I have hung a GT30R from it without any clearance issues either.

Manifold is drilled and tapped for EGT.

Reason for selling: Car going back to stock. I am not taking offers, if it doesnt sell I will just shove it in the attic of the garage and forget about it.

Located in Plainfield IL shipping will be USPS Parcel post unless buyer requests different and is willing to pay difference.

Terry