OK guys, i am getting ready to make a big order for materials and i wanted to see if there is any buyers. I can make ANY interior piece for 2g's, and possibly some exterior parts (i don't have any to make molds of, but i can laminate gas doors etc. Hoods will be available soon), plus i can do other cars, but some parts i will need your stock piece. I use 2x2 twill high grade carbon fiber, high grade epoxies, and ALL parts are high glossed. I can also make them in colors (yellow, red, blue) for a little extra. If you are interested post what you want and i'll give you a price. I will have some pics up for some stuff i've done tomorrow. Also, to go with another post that i was asked, i decided on a price for CF headliners. I can do them for $300 plus shipping, but if you get a group buy going i can go lower (i can only do non-sunroof for now until i get a headliner w/ a sunroof). I haven't decided on prices for everything yet, thats why i want you guys to post. I'll reply a.s.a.p. to everyone. Also, allow 2-3 weeks for delivery.

how about a center consol. i got a spare to send ya?

i'd be interested in a door cap if the price wasnt ridiculous, and possibly some pedal covers?

Bump!! All Show i'm going to check out my console today, because of all the clips and everything i don't know if i could make one, if i did i don't know if the cupholders or console lid would stay because i doubt i'll be able to integrate all the clips/screw holes etc. I'll see if there's a way i can do it. Email me deze2g@aol.com and we can discuss this. Also Blink what do you mean by door cap? The factory ones on the outside of the door that meet with the side skirts? If so i'd need to get some to make a mold, if not what piece do you mean? How would you like the pedal covers to look? Manual or auto?

P.S. If i can't do the console then edit my first post of ALL interior parts to Some. lol

can u make fiberglass items?

cuz id be painting over it. but i still want the light weight. LMK

-mitsuman
Repin SoCal 2GNT
mitsuman95@hotmail.com
AIM: mitsuman95gs

how much for a gas door? I dont wanna roll without one but if you sent me one I'd send you back my stock one (burgandy/bacelona red) and you could do a core charge refund or something.

I also need the little piece of plastic that goes above the hood latch done, I can send you that to fix/cover... I had a neon underbody kit and dremeled out a whole... now I dont have the kit, but I still have the hole =)

Im also interested in the headliner but I have a few questions first, namely how do I take out the old one, how do I put in the new one, and what kinda shipping charge is there to 19713 (Newark,Delaware) from where you live.


T

im sorry lol i meant "gas door cap" not just door cap....my mistake. thanks!

steve

It would be great if you could make some 1 piece spoilers that the turbo models had.

And some Tsunami-like chin/lip front spoilers for the 95-96s.

Just a suggestion.. I might be buying one from you anyways.. if you can get me one at a good deal ..

~Tacoman

I would be interested if you can make some front fenders and the main hatch frame. Whaddya think?

Lane Adams

1998 GST Spyder
1995 GSX
1995 TSI AWD

you no what wold be bitchin and that i would be first in line for?
some carbon fiber engine dress up . such as , fuse box cover, or any of the many caps or lids to fluids, i really dont no the laws of carbon fiber and what can and cant be done. im just babbling cause i like c/f , its not flashy and its not rice. my 2 pennies

if you made engine dress up parts i'd be buying them in a heart beat. also i'm down for a headliner

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

OK guys, i'll post up some prices tomorrow along with pics (i forgot to bring the cable for my digicam to my g/f's so i couldn't post tonight). If you guys are interested in a CF headliner someone can start a group buy in the announcements/gb's section. I will put a 2 week deadline before i order materials, after 2 weeks, i'll see how many people are interested then i will give a final price (no more than $300), The only catch with the headliner is i'm only offering them for non-sunroof vehicles for now. I will be getting a headliner with a sunroof soon so i can get them going. Also i am going to be making some engine dress-up but i'm not sure what yet, if you guys have any more ideas? One more thing i think you guys would like is the rear hatch cover, i am going to be making a mold for that very soon, if anyone is interested. I'll keep posted, you guys give me more ideas. About the fenders, i am currently looking for a junked car or some cheap ones because i need a hood to make a mold also. Once i get a spare hood and fenders it will be about 2 weeks to make the molds. If anyone in the Western Mass, NY, CT area that have a spare hood or fenders i could buy i will hook you up with a discount. Anyway i'll get back to you guys soon about prices.

kwno what wouldf be REALLY Effin sweet? new piece for 97-99 bumpers, the "moons" and the fog light vents (or fog light covers)

just an idea (cause I lost one of my fog light vents)

How about a back seat eliminator kit in CF?????? Just a suggestion.

When you make the headliner for sunroof cars, don't forget about the retractable shade.

When you start making the CF hoods, maybe offer them with a vent on the power hump, like that guy with the black car recently did.



Black '98 GS auto
I-vers intake
Custom ram air
Front & rear strut bars
OBX fog lights w/ fog light mod
RSR rear section
Stereo that goes BOOM

are you going to be making fiber glass hoods? id be interested a glassed hood rather than CF

^^what once was^^


^^what is now.. and permanently^^

lol ....looks like you got your hands full now BCI

I'm in NY and have a spare stock hood. Let me know, email is mamayfield@rbrooks.com . I'll drive on a weekend up to like 50 or so miles to meet you... I don't know, I'll work with ya, just let me know. Peace.

-Mike

amiller99rs: seriously, chicks suck sometimes
amiller99rs: like if a girl walked by and said "Hey, nice cock" and just kept going you'd smile all day about that

OK here's some pics of pieces that i've done. I don't have a lot of room to upload pics, so i only did 3, but i can try and get pics of other parts soon. These are pics of a passenger side a-pillar and part of the lower dash. These pieces are not trimmed yet and the pillar is not sanded or polished. The dash piece is polished and everything, so you get the idea.





I will get some more up with prices soon.

im pissed i dont know how do make c/f stuff lol. lookin good.
just waitin' on some $ prices.....

Can you do an entire dash in Carbon Fiber? I even have an extra dash Email me if you would like to work with me on this....

TrickedEclipse95@aol.com

I'm down for the whole dash. I'm actually down for every interior panel you can make. I'll send you any interior panels you need.

http://photos.freeserve.com/public/detail.html?c_album=400479
Member#3206(LOL)

Last night I lay in bed looking up at the stars in the sky and I thought to myself...

where the hell is the ceiling?