|
Bump with whats left + some more and some pics, crappy iphone pics but pics none the less!
3.55 trans new shifter bushings and seals w/ quaife LSD - 800 + shipping
drive shaft shop stage 2 axles pevious owner filed down the the splines up to the snap ring on pass side axle but have worked fine for me - 300 + shipping (pretty heavy)
built bottom end, wiseco 8.8:1, eagle rods, clevite bearings, Ishira johnson crank scraper, 20% udp, fully balanced, oil pan tapped for -10 an drain - 750 + shipping
spec 5 clutch, 600 miles - 250
almost new SBI (250mi.) lifters - 40
new in box SBI rockers - 75
![]() 
![]() 
stock head w/ matching cam caps, bolts, fel pro valve seals, SBI pt lifters, and SBI rockers - 200 + shipping
![]() 
brand new treadstone cast stainless race turbo manifold - 350
![]() 
![]() 
crane valve spring and ti retainers - 150
![]() 
fidanza cam gears (I have the missing screw and nut for the one) - 150
![]() 
new mechanical tensioner conversion kit, gates racing t-belt, mech tensioner, and idler - 150
![]() 
ross machine racing -6 an fuel rail - 50
![]() 
![]() 
msd round pin coil and wires - 60
![]() 
![]() 
tial 38mm wastegate - 150
![]() 
![]() 
60mm modified jeep throttle body with all sensors - 60
![]() 
![]() 
(2) thermostat housings, one has a gm clt sensor and stock temp guage sensor - 25 ea.
![]() 
almost polished upper intake, no sensors - 35
![]() 
hahn inline fuel pump w/ bracket that mounts at the fuel filter location - 30
![]() 
DSM 450's outta my 6 bolt - 70
![]()  
96' eclipse gs, 2gb conversion built bottom end, crane #16 cams, hx40 pro billet, MS1 v3 MSn'S-E, 3.55 trans, quaife lsd
|