What the title says. I will need the little gear things that attaches to the sensor as well and the little screw that holds it in place. Not looking to spend a fortune on it, lmk what you guys have. I don't know if the 99 is the same as other years, but I know 95's have a different plug in for the harness. Located in Hutchinson, MN 55350.
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#106500, "RE: WTB: 99 MTX Speed Sensor" In response to Reply # 1
What kind of creative wiring would that be? It's far down there so it would be hard for me to get a soldering iron in there, but do you mean just solder in the harness from a different year's plug?
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#106502, "RE: WTB: 99 MTX Speed Sensor" In response to Reply # 2
I could just hardwire and weatherproof the wires directly to the sensor plug for you, then you could solder it into the old harness. There's enough slack for you to pull the harness up to the top of the intake manifold.
Search
Printer-friendly copy
0 Users in Chat
