Well it is time to part mith my 2gnt.(tear) people in the area have first crack but i will ship the big stuff if the price is right.

Built block with stock head
JE 8.8:1, Eale rods, ACL bearings.
$1000

custom turbo kit with FMIC
Ebay T-3 with a street source mani, Tial knock off 38mm wastegate, RFL BOV, ebay IC and custom mandrel bent pipes. The IC got hit by a rock on I44 last summer and got dented alittle. It still holds boost fine.
$1000

Cosmio Coil Overs with KYB gr2's
$250

Walbro 255
$60

Apillar 3 gauge pod
$15

Gauge trim 2 gauge pod
$15

16 chrome 5 spokes with nice tires
$250

Good 97 stock tranny
$400

all the other little parts pm me. You dont want the interior unless you are using it for a fiber glass mold. The front bumper cover is dun do to that rock but the back is good. No side skirts and the car is factor RED paint. Not the blood but the red red. If you are in the area feel free to come look at the car. If you help pull parts your price will be reduced. Prices are W/O shipping.

Sam

how much to ship the engine to ct 06795

how many miles on it
any problems??

I will have to check on the shipping. The motor is in good shape. There is less the 8000 miles on it. The only problem was a piece of weld(bb sized)wend into the #3 cylinder. I took the head off and there were some little dents in the piston. I took the piece out and the motor still runs fine. It will drop in and run with no problems.
Here are some pics of the car in my dsmtuners gallery.
http://www.dsmtuners.com/gallery/browseimages.php?do=member&imageuser=42130

Bump

Hey Sam, did you get my PM?

Is the bumper broken where it bolts to the fenders?

front buper is broken. No v I did not get your pm on this site. Also I have one set of stock 97-99 lights and one set of halo 97-99 headlights. around 100 for each. Feel free to make any offer on a part that might be on my car. I will pull just about anything.

Hmm... I wonder what happened. I'll send it again.

do you by any chance have the driver side seat? if so how much shipped to 60073

TRUELY BUILT NOT BOUGHT!!!!!!!!!!!!!!!

Yes I have it. It was stained pretty bad from the previous owner. If your are putting a cover on it, should work fine.

do you have the rear pass speaker grille

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

it is painted red. Yes

hw much do u want for it ?

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

15 shipped. is that ok?

how bout 12 shipped and i will send u the money trough paypal right now

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

That 3 bucks.... You have a pm

There does not seen to be much intrest in the turbo kit. I will part out if some people have offers.

I suppose you wouldn't be interested in any trades huh?

I would love to get rid of my 17's and get the stock chrome 5 spokes but bad time of year for spare cash to be layin around

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

I have someone comming to look at the rims this sunday. If they dont take them I might take you up. Got pics of your rims?

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

Motor sold.

How much for the whole car? Without the motor & turbo of course.

If you are picking it up I will let it goo without the motor and with the tranny for 800

you got a 12:1 fmu,3 bolt downpipe,or a firesleeve for upper rad. hose?

thanks

Boostin'

I might hsve the fmu. I can sent you my downpipe and you can weld the flange on it. I will pm you if I find the fmu.

Update
Wheels sold
porjector headlights sold
clear corners sold.
motor sold

The turbo kit is still for sale I will part out if sombody wants something.

I cant believe no one needs anylittle parts of this thing. All my prices are OBO please feel free to make me offers. I just got a new Digi so if you want pics of something pm me your email addy and I will make it happen.
Slave cylinder pending...