Originally posted by Star Turbo Talon
Ok Mark, here are a few things I noticed. The problem exists with the 024 code as you stated. In my car the MS claimed my IAT was 131 degrees. Kinda hard when the car is cold and temp is actually 77 degrees. I checked with both a Mutimeter and my Scanner. I loaded code again to make sure it wasnt a firmware issue and it isnt. I swapped ECU chips with the one from my MS and sure enough the problem cleared up. Your ECU chip is bad. Not sure if its not accepting the firmware loading or if it is communicating improperly. I noticed a few things on the MS board that grabbed my attention. Some of the hardware has all been changed from the original build. A few components are also different. Most important I noticed the Socket that the ECU chip mounts into was changed. I have no idea why this was done and I know it was done because I have never seen a socket like the one in your MS in any kit I have produced. If it werent for a few little details of the baord, i would say someone swapped the MS with another but that is not the case. At any rate you need this and your good to go: http://www.diyautotune.com/catalog/cpu-megasquirti-cpu-p-105.html?osCsid=c4d015e7688e74f53b757bf946f34c68 I can either install it for you or I can ship this back to you and you purchase and install it. It doesnt matter to me either . Terry