Thanks to my student loans i'm getting rid of everything including the car. Pics for everything can be found here: http://s1130.photobucket.com/albums/m529/jesterscorpion/

1997 Eclipse GS Auto. $2300 OBO

*153274 miles

*Has a walbro 255 fuel pump, MSD coil, 9mm plug wires, euro style tail lights, cold air intake, header style exhaust manifold, 225-40-18 wheels and tires,
tinted windows, sunroof, power windows, doors, and locks.

*Remote start.

*Entire hatch area has a custom fiberglass sub enclosure for three 12 inch subs.(speakers not included)

*Aftermarket steering wheel (factory wheel and airbag included with car).

*The only problem with the car is the valve seals need replaced (smokes a little when sitting at a red light), and it could really use some new tires, and front brakes.

*The transmission shift pack was replaced new about 1000 miles ago along with the front O2 sensor and spark plugs.

*Im including a set of new lowering springs (red 2") and strut mounting plates.

*The A/C lines have been removed from the car but can be reinstalled if desired.
(was getting ready to drop in built motor when half my paycheck started getting garnished for student loans)

*Never been boosted.

*Car has a clean title in my name
---------------------------------------------



---------------------------------------------
Other items for sale (more pics available upon request)
---------------------------------------------


Built 420A engine= $3500 OBO (Over $4100 invested) will not seperate engine parts or head. Have almost all the boxes still for engine parts.

'BLOCK'
Hot Tanked
Decked
Factory crankshaft balanced and checked
New Freeze Plugs
Bored and Honed +.20 to even up the bores and bore match the pistons
Used JE 10.5:1 +.20 pistons with new rings (less than 1000 miles)
Used Crower Rods (less than 1000 miles)
New Clevite Main and Rod Bearings
New ARP Main Studs
New Gates Timing Belt
New Mechanical Tensioner
New Melling Oil Pump
New Rock Water Pump
New Underdrive Pully
New Oil Filter Adapter Plate with extra ports
New Front Rear Main Seals
New Timing Crank Pully

'HEAD'
Decked
Stage 2 Race Port and Polish with full gasket match
New SS Valves
New Valve Seals
New Crower Springs
New ARP Head Studs
Used AEM Truetime Cam Gears (less than 1000 miles) one blue, one red
New 2.7l rockers
New Lifters with the oversized oil hole
New Crower stage 2 Turbo grind cams
New Mopar +.010 MLS Head Gasket
Used Cam Sensor

'NEEDS'- Oil pan, valve cover bolts, Crank Sensor, Knock sensor, and the flywheel and rear plate bolted back on.


-----------------------------------------------


Zeitronix wideband O2 sensor Zt-2 with all the hardware, including EGT, and LCD Display (EGT needs a $19 extension harness to use) $275 OBO

-----------------------------------------------


MegaSquirt III with pc board v3.0 Assembled with the Aluminum case, and Map daddy 4 bar map sensor with baro corrections.
Unit was moded for the 420A setup with the intention of adding the expansion board for staged injection.
Also comes with a Megastim v2.21 for testing. Unit was never used or installed. Asking $400

------------------------------------------------


Vortech SFMU all the original hardware is included as well as fittings. Asking $200 OBO

------------------------------------------------


AT to MT swap kit Comes with the tranny, cables, mount brackets, shifter, instrument cluster, sensors, pedals, 97 Manual ECU,
and modular clutch. Its everything needed to swap from an auto to a manual. Asking $500 for all


------------------------------------------------


New OBX turbo exhaust manifold with the t3-t4 flange. $150.00 OBO

-----------------------------------------------


Custom finished OBX Intake manifold with a MP 60mm throttle body and OBX aluminum fuel rail (blue).
Started an 8 injector setup on it. (see pics) Asking $200 OBO

-----------------------------------------------

If there are any questions feel free to ask. Everything is located in 40403