I wrecked my truck and have to ditch my project to afford a new one, everything must go, everything is obo, and i will have to get all the parts out of storage toward the end of the week so if you buy it on monday it will be shipped as soon as possible somewhere around thurs-sat. Ill have pics up this weekend

I will charge the actually shipping cost on everything
i will separate parts but id rather sell them all together

Here it go's

Balanced rotating assembly-$750(Installed but New)(these are just the parts out of the block not an assembled short block)
-Weisco Std. Bore 8:5:1 comp pistons w/JE rings (some of the graphite coating wore off during the balancing process
-Eagle H Beams
-New Crank
-New ACL Bearings(Not the once used to balance)
-New Oil pump(Oem Replacement)

Head parts
Obx Cams 242/242 they are actually very high quality cams-$300
set of 2.4 lifters-$45(New)
Crane valve springs w/ titanium retainers-$150(Used)

Intake/Fuel Setup-$400(New)
-OBX Intake Mainfold(rough bore for throttle body)
-OBX Fuel Rail(Blue)
-Modern Performance throttle body
-Deka 850cc low Impedance Injectors(will need an EV6 adapter)

Cooling-$400(used)
Fluidlyne Radiator( a few bent fins they will be combed out before shipment)
dual flexalite(i believe they are 4500 cfm)
Gates silicone hose kit(new)

Complete Star Turbo kit-$850(used)
Star Manifold ceramic coated black(starting to flake)
Turbonetics T3/T4 60trim(slight side to side play but no in and out)
Turbonetics Evolution Wastegate
Star Downpipe
star Intercooler w/piping, Some of it has crude heat wrap the chrome is flaking and it has a couple dents)
New NGR type S BOV
Ill include the ghetto ebay type Rs if you want it.
Im not positive but i think its a vortech FMU

Ignition parts
2 round pin MSD coils-$30 each (used)
Accel Plug Wires Blue-$25(used)
Accel Plug Wires Yellow$25-Used
Taylor Made thundervolt 8.2mm Plug wires blue-$40(new)
Msd DIS-2 w/dual ignition adapter-$200

Engine Management

Megasquirt 2.2 w/Mitsubishi Ignitor for spark control w/base tunes-350(new)
Zeitronix LCD wideband-$300(used)

Transmission parts
Fidanza aluminum flywheel-250-(new)
Centerforce dual friction clutch-350(new)

Random Parts
Used OBX Intake Manifold a few little scratches-$85
Ebay Underdrive Pulley-$45(New)
ported throttle body(ported by machine shop)-$30(used)
Ive also got two cars to part out

More parts to come

Why did i turbo a 420a? Why is your 4g63 smoking in a ditch?