I wrecked my truck and have to ditch my project to afford a new one, everything must go, everything is obo, and i will have to get all the parts out of storage toward the end of the week so if you buy it on monday it will be shipped as soon as possible somewhere around thurs-sat. Ill have pics up this weekend

I will charge the actually shipping cost on everything
i will separate parts but id rather sell them all together

Here it go's

Balanced rotating assembly-$750(Installed but New)(these are just the parts out of the block not an assembled short block)
-Weisco Std. Bore 8:5:1 comp pistons w/JE rings (some of the graphite coating wore off during the balancing process
-Eagle H Beams
-New Crank
-New ACL Bearings(Not the once used to balance)
-New Oil pump(Oem Replacement)

Head parts
Obx Cams 242/242 they are actually very high quality cams-$300
set of 2.4 lifters-$45(New)
Crane valve springs w/ titanium retainers-$150(Used)

Intake/Fuel Setup-$400(New)
-OBX Intake Mainfold(rough bore for throttle body)
-OBX Fuel Rail(Blue)
-Modern Performance throttle body
-Deka 850cc low Impedance Injectors(will need an EV6 adapter)

Cooling-$400(used)
Fluidlyne Radiator( a few bent fins they will be combed out before shipment)
dual flexalite(i believe they are 4500 cfm)
Gates silicone hose kit(new)

Complete Star Turbo kit-$850(used)
Star Manifold ceramic coated black(starting to flake)
Turbonetics T3/T4 60trim(slight side to side play but no in and out)
Turbonetics Evolution Wastegate
Star Downpipe
star Intercooler w/piping, Some of it has crude heat wrap the chrome is flaking and it has a couple dents)
New NGR type S BOV
Ill include the ghetto ebay type Rs if you want it.
Im not positive but i think its a vortech FMU

Ignition parts
2 round pin MSD coils-$30 each (used)
Accel Plug Wires Blue-$25(used)
Accel Plug Wires Yellow$25-Used
Taylor Made thundervolt 8.2mm Plug wires blue-$40(new)
Msd DIS-2 w/dual ignition adapter-$200

Engine Management

Megasquirt 2.2 w/Mitsubishi Ignitor for spark control w/base tunes-350(new)
Zeitronix LCD wideband-$300(used)

Transmission parts
Fidanza aluminum flywheel-250-(new)
Centerforce dual friction clutch-350(new)

Random Parts
Used OBX Intake Manifold a few little scratches-$85
Ebay Underdrive Pulley-$45(New)
ported throttle body(ported by machine shop)-$30(used)
Ive also got two cars to part out

More parts to come

Where are you located? I'd like pictures of the turbo kit.

I'm in Houston, I'll have pics up this weekend

I am interested in the waste gate and the exhaust manifold. If you are willing to part it, let me know.

PM'd

Head parts, cooling parts, and turbo kit pending

pm'd

Rotating assembly





Head Parts




Intake/fuel set up



Cooling set up



Star Turbo Kit







Megasquirt



MSD DIS-2



Used OBX manifold


Underdrive pulley

Ported throttle body


Clutch and flywheel



New parts
Arp Main Studs-$130
Arp Head studs-$70
Hayame Blue fuse box cover-$15

Slate gray powder-coated valve cover w/chrome fill cap-$50

Timing kit w/ tensioner and 2 beltes(topline/pci/gmb)



99 OZ edition gauge set-Make an offer

Custom turbo kit Turbonetics super 60trim rebuilt, custom cast manifold(fully ported) custom downpipe, and turbonetics deltagate all professionally cermaic-coated silver



Ebay cam gears, good shape-Make an offer

Moroso Oil pan cut an re-welded for an eclipse-$175

Greddy Pro-fec B Spec 2 well used but still works, the guy i bought it from used electric tape to mount it so the top and bottom are sticky-$70

Wideband megasquirt and used manifold SOLD

Cams-lifters-valve springs/retainers-Star kit-and profec sold

And the cooling setup ;)

Gauges, and universal parts?

Ive still got more parts to remove from the car,and i sold my gauges locally. As far as universal parts ill have to dig through the rest of my parts, i may have a greddy turbo timer and a few left over autometer gauges. Ill have pics up this weekend for both sets of wheels, my body kit, a sfi approved 12 point cage for 2gs as well as whatever else i may find.

Im accepting offers i need to get this stuff gone

Payment sent.

$50 for the OZ Gauge cluster?

Never mind


Edit: Did not notice it was already sold.

100 shipped for the NEW OBX INTAKE MANI

PM Sent

Ha,ha Wrong spot.

EDIT: Im a idiot.

I want your EBC. You have a PM.

p/m sent get back to me asap please.

pm'd again.

I am still wating on a reply from my PM.

Has anyone received anything from this guy? I send a lot of money and haven't heard from him in quite some time.

I have heard this from several people.

You guys need to file claims ASAP, as time may be running out.

Also, you may want to call your bank if you used funds from them to pay.

Thanks man, appreciate the feedback.