Well, I was trying to work on the 1g today and ended up getting a case of fuck it and decided to drill some holes in my car. So needless to say, I got the 2ga Talon side skirts mounted today. Pretty self explainable. I set the skirt where it needed to be and marked the tabs for where the lock tabs go with white out. I then laid it up to the car and it marked where I needed to drill. I used a 1/4" drill bit for the holes.
(I made this one big so you can see the holes a little better.)



Next I just used some of what I call "mitsu screws" (which is the normal interior gold screw that comes in the eclipse/talon) and screwed them into the metal underbody of the car and used OEM clips for the side skirt(I ONLY recommend oem clips for this) and then clicked it in to place. Viola, done, repeat process on other parts of the side skirt. The only other tricky part is when installing the door cap make sure when you open the door it does catch on the front fender. I had to adjust both of my front fenders to get it to clear the door cap and fit correctly. More pics....

/>

/>

/>

I'll get some better pics of it tomorrow! Next up should be the 2gb talon side streak and then down the road....PAINT!!!