Sup guys..
Ok, after I had PAIN for 5 days.
Just so maybe you guys can check this out later on if you hvae problem as well.

I bascially did this on my laptop, and OH YEAH, it's working like a charm.

Just go right click MY COMPUTER, click on Properties, pick the HARDWARE tab, click on DEVICE MANAGER, click on the '+' under the Ports (COM & LPT),

in there, you should see the Serial Port (COMx), the one you want to use for your MS. the one that you installed or added to your laptop or PC. (either USB-Serial, PCIMCA Serial Port, etc...) double cluck on that hardware (port)

And now a new window pops open.
There are two ways.
1) for some computers, it will have a tap called FIFI Buffers, or Advanced Setting
2) for some computers, it is just under the PORT SETTINGS tab, and click on the ADVANCED.. button

Once you in there (TAB<1>, or new page<2>) just UNCHECK the "Use FIFO buffers (requires 16550 compatiable UART)" (don't use it) (UNCHECK IT)

Then try it out again.
Your serial port should work perfectly now =)

The reason is because if this feature is on, it will buffer the data transmitted through the serial port, and when the buffer is full, then write out the data. this is useful if your serial port is very fast, or if the device connected to your serial port is too fast or too slow compare to your serial port. But in our case with MS. it is not. so buffering the data will only corrupts them and make the connection not stable!

Try it. it will help ALOT!

Thanks all again for your help. especially XtremeRS.

Later. back to more tuning and reading
Gil

~~~~~~~~Modification~~~~~~~~
Performance: MegaSquirt v3.0 Fuel & Spark, 8.6:1 JE piston, Eagle Long Rods, SPEC III Clutch, EVOIII B16G, FMIC, Aeromotive 1:1 FPR, Walbro 255HP, 680cc Injectors, 2.5" DP, 3" Magnaflow Cat, 3.5" Greddy EVO CatBack, Greddy Electronic EGT,FUEL,BOOST,A/F gauges...
Interior: Racing Seats, Metallic Interior, 15-Speakers System, Keyless, Dynomat Insulated, Neons...
Exterior: 1999 Body with turbo wing, Halo Projector Headlight, 4300K HID, 17" Mille Rims, GSX Calipers...
Coming Soon: Water Injection, Redo Undercarriage, Repaint Exterior


$240 For New Complete GSX Calipers Kit (Calipers, Bracket, Shim, Pad, Bolts, etc) Email Me If Interested!

1995 RED Eclipse GS-'T': Stage VI 20PSI
2010 Audi S5 Quattro