the wiring should not be that hard. a shop manual will help you a lot tho
you will need to find an RPM signal wire. TPS signal wire (I am sure you know where your tps is located at) Map signal wire (you will have to cut this, run one side to the AFC, the other side to your ECU) ECU main power wire, and ground. A/F ratio wire if you plan to do the blue wire mod (if you wanna moniter your A/F using your S-AFC
setting should be pressure sensor, then try 6 in and 6 out (worked for a lot of us, but not sure if it will for you) just play with the in and out settings till your car idles fine.