Ok i will do my best here.

First page: washers are for crossmember, bolt in top left is for trans to engine bolt. no idea on the rest, the stud bolt might be for trans case. I will have to chk mine when i get home.

Second page moving left to right bottom to top.
first row looks like all suspension bolts.
1. first two look like the wishbone to strut bolt 17 mm head.
2. second pair look like suspension hard to tell
3. 3rd pair are for crossmember front 2 bolts.
4. remaining 3 are for crossmember and suspension.
5. 2 long bolts look liek engien mount bolts

Second row:
1. washers are for crossmember
2. two bolts....prob suspension
3. 2 more bolts....hmn look like trans to engine but not sure about that
4. three nuts...trans mount
5. three bolts are trans to engine no doubt
6. 8 short bolts....probably trans case halves or bolts for end plate on trans may be even mount to trans bolts (i think trans case halves consiste of short and long bolts)
7. two long bolts...maybe more suspension hard to tell how much did you take apart?
8. 1 single pointed bolt is trans to engine bolt

Third row:
1. ton of longer bolts....poss trans case (some of them) and i think you reverse bolt is mixed up in here
2. 10 bolts...poss trans end plate if one about went to trans case or mounts.
3. washers.....suspension poss

4th row:
1.long stud bolt...not sure, reverse bolt is not stud in mine.
2. two single bolt....prob cross member to trans mount in front
3. 4 bolts are the flywheel to flexplate
4. 1 long single bolt...not sure
5. twisted thing...no idea
6. short fat bolt with seal....trans drain bolt
7. one single bolt...hard to tell
8. 8 bolts.....maybe brackets in engien bay....bat tray bolts?
9. 4 nuts....anywhere suspension maybe
10. two odfd bolts...cant tell
11. 5 bolts....brackets ect
12 loks like a washer next to 5 bolts...not sure

Third page:
the TOB square side will slide into the clutch fork and the tiny little tabs will make contact to hold the TOB with the fork.

This is a joke right? Your fuc&*ng with me here right, you are laughing your ass off i would go through all this arent you.

Terry
96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges

97 Eclipse
Greddy header - Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

Mitchell on Demand copies available