#103049, "My build" Mar-03-09 08:01 PM by 98_talon
heres my build
well heres the for this winter 1.remove engine and fix timing and clean it up a bit more 2.while engines out remove power steering,relocate battery,ECUand fuse box 3.shave everthing i dont need in the engine bay and clean it up sand and paint 4. make custom steering loop and breather so steering works as a manual steering rack and does not get water and dirt in there 5.once engine is reinstalled tuck wires and hope it runs again 6.some fiberglass work 7.remove airbags 8.install new steering wheel and quick release 9.relocate washer tank and coolent resvoir
well so far i got the engine hauled out the fuse box hauled out .ecu hauled out.The dash hauled out ,power steering removed and made the custom loop hose and breather, now just to find a spot to locate the fuse box around the dash and then lengthen every single wire that goes to it.then locate the ecu under the dash and lengthen every wire for that. pictures are not in oreder this time next time they will be
marking every wire we had to cut so we would not make a mistake putting back togather
loop and breather just have the get a longer hose to go to the breather
well got a lil more done not much
well heres the progress so far, will start sanding the engine bay and welding up bolt holes and shaving everthing.
but your car is screaming "Drop me!" grab some good springs and that will be niiiiice.
______________________________________ ______________________________________ "Don't fear the weapon, fear the soul of the warrior using it." "My CEL only goes off when i remove my battery."
Best sum up of working on a 2GNT DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."
Ahhhh Priceless . . . eclipse982nrRST "its actually lightish red" RoninEclipse2G "yeah, they already have a color for that... it's called PINK"
well messed around with it a lil bit tonoght did some more wiring , removed the old remote start and all the wires for it ,removed master cylinders (clutch and breaks)starting sanding engine bay and made template for fire wall
i will be sanding and painting the master cylinders