I tried the search, but couldnt find what im looking for.

Im looking for pics of different 3" downpipes, specifically, the first couple turns.

The problem: Im using an HX40 turbo with an HRC manifold. This puts the turbo outlet ~1"-1.5" further to the passenger side than the s16g.

Were having trouble coming up with clearance for both the power steering and a/c compressor.

What is the tightest radius 3" bend available (link?)?

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

Tightest 3" bend? for a mandrel bent pipe it is typically a 3" radius at the very least
To make it tighter you need to either get crush bent pipe or cut sections out of the 3" bend you do have and weld it back together to make it smaller radius.

1995 Eagle Talon ESi

Or you can just take out the A/C, either way you're going to have a very extreme bend. I've got the HRC 3" downpipe and it hits the A/C lines.

_____________________________________


http://www.dsmregistry.com/detail.php?carid=1133
*form follows function*

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

Hummm, I was thinking about getting the HRC 3" downpipe, do I MUST remove my A/C ???

_____________________________________


http://www.dsmregistry.com/detail.php?carid=1133
*form follows function*