Well we have most decided as of late that the treadstone manifold is basically a replica of the STAR without the name stamp. Well I was looking at this other manifold of a similar cast design, and just curious for opinions since I haven't found anything about it as of yet.
#97894, "RE: Turbo Manifold comparisons" In response to Reply # 0
'cept for the rust and price, they look the same to me...but one of them is JDM Y0! AND its "Casted Iron"...but the other one DOES have a 1yr warranty...
Originally posted by turbo8u his girl kept looking out and down my car like uh ok we're in this 100 whatever thousand dollar car and that little whatever it is just raped us.... turbo screamed past the window like a vortex of ownage :-P robbing his engine of all the air around, and thats how i like it
Originally posted by ez I came across a huge sack of walnuts in my grandmas garage - I better make use of them.
#97903, "RE: Turbo Manifold comparisons" In response to Reply # 3
I bought my FMIC from autosquare on eBay, but I don't know if I could trust the quality of a manifold. It's not too expensive though so I say give it a try and let everyone know if it's any good. If it is, I may be in the market for one for them for that price haha.
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#97909, "RE: Turbo Manifold comparisons" In response to Reply # 4
"Dear buyer this item has 1 year warranty for again cracks and defection. tear and ware, personal damaged does not count. Currently, ship to Alaska, Hawaii, Post Office boxes, APO/FPO PR Canada will be international Rate $30. 5-7 business day shipping."
Wow, I actually got a reply...
-Xavier- 95 Eclipse RS-T...lost in the frozen tundra
#97911, "RE: Turbo Manifold comparisons" In response to Reply # 5
Go for it and let me know! I need one so I can use my external wastegate.
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#97915, "RE: Turbo Manifold comparisons" In response to Reply # 6
Did you buy it? Says someone bought it on that link. It sure as hell looks thick enough, but you can't see the welds in the pictures they give you. If you were the one that bought it let us know how it turns out. They at least have a 98.8% positive feedback rating, that's pretty good... let's hope you aren't the 1 out of 100.
#97916, "RE: Turbo Manifold comparisons" In response to Reply # 7
It's a cast piece so it shouldn't have any welds on it. Just don't know how well the casting process was done on it.
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#97920, "RE: Turbo Manifold comparisons" In response to Reply # 9
You bought the one listed above? Let us know how it turns out because if it is a good manifold, I'll put my Hahn manifold on ebay or sell it here and get that one to save some money!
#97995, "RE: Turbo Manifold comparisons" In response to Reply # 13
Let me know how it is X, I need a new one!
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#98071, "RE: Turbo Manifold comparisons" In response to Reply # 17
FINALLY got here today woo hoo. Getting ready to toss it in the oven as we speak, so the new high temp coating can cure. Took pics with the cell phone then the digi cam when I found it...they're on the way
-Xavier- 95 Eclipse RS-T...lost in the frozen tundra
#98394, "RE: Turbo Manifold comparisons" In response to Reply # 18
Any follow up? Im about to purchase a treadstone manifold unless this is of equivalent quality. Treadstone's auctions say they arent, but would like to hear from someone unbiased.
#98404, "RE: Turbo Manifold comparisons" In response to Reply # 19
I just put mine on last night. My friend has a Treadstone manifold so I saw firsthand if they differ. Overall, very, very similar to each other. Fitment was good on it, but the two middle bottom bolt holes needs studs put into the head because there is no way to fit a stud bolt in between the flange and the manifold. That was the same with the Treadstone though as I installed it on my friend's car (he had all new studs put into his head). Not sure if the Star manifold has the same issues. I need to run to the hardware store today to pick up some new bolts to bolt up the turbo to the manifold though. I really don't have time to post up pics right now, but I did post them on DSMTuners in a thread I made because they allow me to upload directly onto their server. You might have to be a member to view them though, not sure. It is located in the 420a Turbo section.
My overall opinion, worth the 100 bucks or so you save off of a Treadstone Manifold. I actually got mine for 183 shipped because I didn't use the Buy It Now feature, so that saved me an extra 10 bucks. I'll be back later today to probably post up some pics and more info about it.
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#98435, "RE: Turbo Manifold comparisons" In response to Reply # 22
IMO, they are exactly the same. We didn't have his manifold off his car so I could compare weights, but this one is by no means "light".
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
Search
Printer-friendly copy
0 Users in Chat
