hey dude, the other wires coming out from the coil the other two what does each color mean also? do i need to tap this? also what location are the other wires i got to tap? is it the wires located right to the side of the 2.0 sign? all the wires connected to the back thing? is there any other wires i should know what the color means on our cars etc? did you get the tach adap to work yet ? thanks michael
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
#9594, "RE: Calling FAST420A ???" In response to Reply # 0
Coming out of the coil there is a black wire with a red stripe that is a little thicker than the other 2. That is the positive coil feed. The other 2 wires are the negative feeds for each coil.
The msd install is pretty quick and easy, just read the MSD instructions a few times. Also the instructions on www.asog.net are helpful.
FROM ASOG.NET: Author: alf_man Category: Electrical Application: 1996-I4 Date Created: Apr/11/2000 Instructions:
Ok this worked with me first mounting the ignition module where the factory air box was. I put the tach adapter(which you will need) on the fender well behind the metal plate. Follow the MSD instuctions for connecting the DIS-2 and the tach adapter. Ok now the part where MSD couldn't help me. Undo the plug to your coil pack. Then cut the wire about 5" back. The Black and red wire in the middle is your 12v feed; connect your coil feed there on the plug, then you connect the MSD feed on the other end since you cut it inhalf. The other four connection don't matter what order as long as you put the 1st negitive on the same color, and the second on the other. Don't cross these. You will have a power to connect to your battery positive, and a ground to the negitive. The Blue and Brown wires still hanging just snip them off. Don't forget to set it up for a waste spark, because you will need one.
All Motor Beast in need of MAJOR TUNING Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
#9595, "RE: Calling FAST420A ???" In response to Reply # 1
I want the MSD ignition but is it possible to mount it under the driver or passenger seat?? I have NO room in my engine bay for that thing, plus I would think away from the engines heat would be the best bet??
#9596, "RE: Calling FAST420A ???" In response to Reply # 2
You can but you would have to get longer wires and also it will make it hard to adjust. The unit is designed to withstand the engine bay heat, it also heats up it self, thats why they tell you in the instuctions not to mount it in the glove box which was my plan.
All Motor Beast in need of MAJOR TUNING Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
#9597, "RE: Calling FAST420A ???" In response to Reply # 3
hey dude, i heard from my friend with a 2g gst that i need to also tap the rpm signal? what color is this? and is located at the upper or lower part of the ecu?... what is a waste spark?.... is that the only wire that msd could not help you with? or is there others wires i got to find out what they mean or where they are located?.... did you get your tach adapter to work with your car now dude? also if you dont hook up the tach with the msd is that bad? do we need 2 tach adapter or just one? i know with the crane for our cars we need 2 tachs why is this? thanks Michael 99gs-t'd
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
#9598, "RE: Calling FAST420A ???" In response to Reply # 4
i was looking at the 2 ground wires coming from the coil pack, and i found where the black with green stripe goes but where does the other lead to? cant find it... anything else i need to know etc for the msd dis2 install with tach later? michael
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
#9599, "RE: Calling FAST420A and MSD DIS 2 people?" In response to Reply # 5
i picked up my ignition msd dis2 today, i was wondering on my eclipse 99 coming out from the coil which is the channel 1 and channel 2 ? also is the coil harness the other end of the ignition coil i just cut in half? also how it says, to connect trigger 1, then trigger 2 its just like connecting it to the same wires as coil 1 and 2? also if i switch them is that bad?also for the tach adapter do i need to buy the interface harness which they say is extra? thanks Michael 99gs- hrc stage 2
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
#9600, "RE: Calling FAST420A and MSD DIS 2 people?" In response to Reply # 6
>i picked up my ignition msd dis2 today, i was wondering on >my eclipse 99 coming out from the coil which is the channel >1 and channel 2 ?
I honestly don't know, as long as you match the colors, the color you connect to the white wire needs to be the same color as the one you connect to the white striped one and the one that you connect to the green needs to be the same color that connects to the green striped one. Red wires to the Larger black wire with a red stripe wire. I don't have my car right now to tell you how mine is exactly, it's in the shop being fixed for the last time.
>also is the coil harness the other end of the ignition coil >i just cut in half?
YES
also how it says, to connect trigger 1, >then trigger 2 its just like connecting it to the same wires >as coil 1 and 2? also if i switch them is that bad?
YES
also for >the tach adapter do i need to buy the interface harness >which they say is extra?
Only if your tach adapter doesn't have the butt plugs on it that will allow you to tap in to the MSD wire harness on the wires that have the butt plugs also.
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#9601, "RE: Calling FAST420A and MSD DIS 2 people?" In response to Reply # 7
thanks dude, whenever you get your car back if you could let me know... i dont plan to put it in soon just figure ( plan ) it all out... plus i dont got time right now to many finals to study for.. also where did you mount your msd and tach adapter at? thanks michael 99gs-t'd
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#9603, "RE: Calling FAST420A and MSD DIS 2 people?" In response to Reply # 9
thanks dude, i think i might have to mount my ignition somewhere else since i got a hrc stage 2 turbo? mike
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
Search
Printer-friendly copy
1 User in Chat
