if anyone knows size bolts for the following plz help

star manifold to engine
star downpipe to manifold
turbonetics deltagate to star manifold
star downpipe to manifold
turbonetics t3/t4 to star manifold

need size, length is also important, etc..
someone already gave me the one for manifold to engine but i wrote it down on a piece of paper and lost it that is the most important one i need, other stuff i can just bring along with me to the hardware store to test fit...
thx guys.

Manifold -> engine is 8mm x 1.25 pitch

1995 Eagle Talon ESi

Thx!

Bump! Searched but didn't find much.

I need to know the bolt sizes for:
- 4 bolts from the turbo > star manifold
- 5 bolts from the downpipe > turbine housing
- 2 bolts from the wastegate > star manifold
- 2 bolts from the dump tube > turbonetics delta-II wastegate

The turbo bolts look like 10mm, and the rest look like possibly 8mm, but what are the pitch and lengths?

Also, where would be the best place to get the exhaust gaskets for:
- T3 turbo flange gasket
- 5-bolt downpipe gasket
- little 2-bolt wastegate gaskets

Thank you very much!

Chris
95 Talon Esi Turbo

I contributed to the Wiki!
http://www.2gnt.com/index.php?d=Full_Talon_to_Eclipse_Conversion

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

I would take the mani and turbo to the hardware store and figure out everything you need there.

Mike D
-------------------------------------------------------------------------------------------------