if anyone knows size bolts for the following plz help

star manifold to engine
star downpipe to manifold
turbonetics deltagate to star manifold
star downpipe to manifold
turbonetics t3/t4 to star manifold

need size, length is also important, etc..
someone already gave me the one for manifold to engine but i wrote it down on a piece of paper and lost it :( that is the most important one i need, other stuff i can just bring along with me to the hardware store to test fit...
thx guys.

Manifold -> engine is 8mm x 1.25 pitch

Thx!

Bump! Searched but didn't find much.

I need to know the bolt sizes for:
- 4 bolts from the turbo > star manifold
- 5 bolts from the downpipe > turbine housing
- 2 bolts from the wastegate > star manifold
- 2 bolts from the dump tube > turbonetics delta-II wastegate

The turbo bolts look like 10mm, and the rest look like possibly 8mm, but what are the pitch and lengths?

Also, where would be the best place to get the exhaust gaskets for:
- T3 turbo flange gasket
- 5-bolt downpipe gasket
- little 2-bolt wastegate gaskets

Thank you very much!

Originally posted by chris712vt
Also, where would be the best place to get the exhaust gaskets for: - T3 turbo flange gasket - 5-bolt downpipe gasket - little 2-bolt wastegate gaskets Thank you very much!

www.atpturbo.com
or local speed shop

I would take the mani and turbo to the hardware store and figure out everything you need there.