Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 3 Users in Chat
Top 2GNT Technical Turbo/Nitrous Tech topic #9332
View in linear mode

Subject: "attn avcr users..again" Previous topic | Next topic
rsXboy99Nov-12-01 04:27 PM
Old School 2GNTer
113 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#9332, "attn avcr users..again"




          

I redid my wires like it said in the manual..with just one hose going to the boostport on the wastegate, and one to the comressor housing..but now i cant boost over .4 bar...where as before I could get to 1.6 bar..but never past that...any suggestions?

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

toykillaNov-12-01 04:50 PM
Old School 2GNTer
881 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#9333, "RE: attn avcr users..again"
In response to Reply # 0




          

LAST EDITED ON 12-Nov-01 AT 10:51 PM (PST)

send it back and get the profec B..with all that money you will save you can get that button from low and high boost to mount on the steering wheel. =))

Robert Parkhurst
toykilla@comcast.net

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
GregNov-13-01 02:31 AM
Old School 2GNTer
392 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#9334, "RE: attn avcr users..again"
In response to Reply # 1


          

Is this the way you hooked it up????? Mine is like this and works perfect!


Hook it up like this: Run a vacuum line from the Compressor Houseing on the turbo to the "NO" port on the AVC-R boost controller unit. Then Run another vacuum line from the "COM" port on the AVC-R to the "boost" port on the Wastegate (it's the side port on the wastegate). The "NC" port should be vented to open air on the AVC-R boost controller unit, and the "Vacuum" port on the wastegate should be vented to the open air also. I think this is your problem. re-do your vacuum lines like this and let me know if it works

Greg Williamson
1999 Eclipse GS "Sport" (Sold)
Star Stage III
12.817 @ 109.36

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
rsXboy99Nov-13-01 09:14 AM
Old School 2GNTer
113 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#9335, "RE: attn avcr users..again"
In response to Reply # 2




          

Thats how I did it..so today I went back to my original setup with the vacuum port on the wastegate runing to the COM port on the avc-r, and the boostport on the wastegate runing into a T with the compressor housing line...and running to the NO port......

But today after redoing that..i set it on 1.0 bar..and I hate 1.5 bar..so i fixed my not enough boost problem..but now im getting to much...

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
Super20GNov-14-01 02:43 AM
Old School 2GNTer
2545 posts,
Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#9336, "RE: attn avcr users..again"
In response to Reply # 3


          

Ha, well thats a good problem to have though. Hitting 25psi on racegas is a rush, huh mark? I'd like to get my car back on the road to see how she likes these cold air temps. I bought another windshield wiper fluid pump. I am gonna run the hose off of it to a nozzle so it sprays mist on the FMIC, then I am gonna run a switch to the cockpit so I can hit it while I'm racing. Think it'll add lower intake temps? I'll report back in a few weeks.
--
Brad Rickard
98 GS HRC Stage V (nuff said)

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Turbo/Nitrous Tech topic #9332 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.056 seconds, executing 22 queries.