For those of you who have replaced the accel pump, what did you use and how do you like it? I have a walbro 255 in the tank, but for some reason it's leaning out above 10 psi. With the accel on it's fine, but it's loud as hell. You can hear the pump over my car, and that's quite a feat.
____________________________________________________ four nails four corners four riders and four horses
#87602, "RE: Accel pump from hahn is dieing. What have you guys replaced it with?" In response to Reply # 0 Jul-02-05 08:51 PM by XtremeRS
Derek, I use the Walboro intank 255HP only, and i've had no problems with 15 psi at all..You sure your intank isn't going bad? I can't stand the loud ass inline pumps..The Walboro should be good for like 450-500HP i belive.. Do you notice your fuel pressure drop off under boost? I wouldn't rule out the FPR either, although less likely..
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#87611, "RE: Accel pump from hahn is dieing. What have you guys replaced it with?" In response to Reply # 2
Originally posted by SilverBullet20g Will please somebody make this so we don't have to use that Accel pump? Two walbros in the tank would solve all fuel problems
Sorry here is the pic.
_____________________________________ Scott 90' GSX, 06' Effo SSL
#87630, "RE: Accel pump from hahn is dieing. What have you guys replaced it with?" In response to Reply # 5
Well my walbro must be bad. I don't have any way to watch my fuel pressure under boost, perhaps ill run a line from the fpr out of the hood and watch it. When I turn on the fuel pumps with the car off my fpr seems to work. I apply pressure and vacume and the pressure changes like it should. I really think it's my walbro. Sumbitch. It's not loud, I can hear the walbro but it's not killing me like the accel. The walbro isn't that old, I wonder if I got shafted and they didn't send me a walbro.
____________________________________________________ four nails four corners four riders and four horses
#87634, "RE: Accel pump from hahn is dieing. What have you guys replaced it with?" In response to Reply # 6 Jul-03-05 02:10 PM by pr0
I have been debating if I should get rid of the Accel and just use an intank Walbro... the Accel is very noisy and annoying. From the outside, the car sounds like a rocketship.
Search
Printer-friendly copy
1 User in Chat
