2GNT.com Forums - Viewing topic - Finally, 3" Downpipes are complete!

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

0 Users in Chat

Turbo/Nitrous Tech

topic #85862

View in linear mode

Subject: "Finally, 3" Downpipes are complete!"

Previous topic | Next topic

etx	May-11-05 05:33 AM
Donating 2GNT member 9740 posts,

#85862, "Finally, 3" Downpipes are complete!"

Ok, I've finally finished building these things last night. I've been working on this for over 5 months! Double and tripple checked all fitments on a bone-stock 95 talon. I'll have the pics up tonight. They are 3" mild steel with High temp silicone powder coat and have a stainless steel 3" flex pipe on the lower part. Also they are only for the HRC turbo kits, But I could build an upper for the star if I had a star mani and turbo to test fit. Price is $290 + shipping. Minus the PC they are $270, and I can also install a 3" dump for $35. I'm offering the first two for $250, first come first serve. emoji

Now, I'm not a master welder. These first two are a little rough around the beads, ya know. emoji But ill post picture of them asap. Also, this is not an attempt to compete with HRC. They are just a more cost effective piece, if you want to same some cash. If you want full SS pipe with tig welds get the HRC, I'm not here to compete with Bill and he has kids to feed. I think they look really great with the high temp silicone powder. Silicone powder is weird, it dosen't come out as smooth as regular powder. But it does not discolor! I put a coat on the DP i built for my car and it still looks like new after months of driving it every day.

I'll have an ordering page up soon also. And every pipes has a 30 day Derek fucked something up warranty. I spend a lot of time on each one, so they will all be solid. If you have any questions please post them here.

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: Finally, 3" Downpipes are complete!, downshift311, May-11-05 05:36 AM, #1

RE: Finally, 3" Downpipes are complete!, Team

Team

etx, May-11-05 05:56 AM, #2

RE: Finally, 3" Downpipes are complete!, downshift311, May-11-05 06:02 AM, #3

RE: Finally, 3" Downpipes are complete!, Team

Team

etx, May-11-05 06:03 AM, #4

RE: Finally, 3" Downpipes are complete!, downshift311, May-11-05 06:09 AM, #5

RE: Finally, 3" Downpipes are complete!, whodatt1, May-11-05 06:19 AM, #6

RE: Finally, 3" Downpipes are complete!, thedawg, May-11-05 07:06 AM, #7

RE: Finally, 3" Downpipes are complete!, Moderator

Moderator

EvuLFleA, May-11-05 07:36 AM, #8

RE: Finally, 3" Downpipes are complete!, turbo8u, May-11-05 07:40 AM, #9

RE: Finally, 3" Downpipes are complete!, Team

Team

etx, May-11-05 08:08 AM, #10

RE: Finally, 3" Downpipes are complete!, turbo8u, May-11-05 08:46 AM, #11

RE: Finally, 3" Downpipes are complete!, PiKapp504, May-11-05 08:57 AM, #12

RE: Finally, 3" Downpipes are complete!, Moderator

Moderator

micyek, May-11-05 12:24 PM, #13

RE: Finally, 3" Downpipes are complete!, Team

Team

ner947, May-11-05 09:58 AM, #14

RE: Finally, 3" Downpipes are complete!, Team

Team

etx, May-11-05 04:13 PM, #15

RE: Finally, 3" Downpipes are complete!, run4cvr, May-11-05 04:41 PM, #16

RE: Finally, 3" Downpipes are complete!, powellds, May-11-05 04:44 PM, #17

RE: Finally, 3" Downpipes are complete!, Dirty, May-11-05 05:03 PM, #18

RE: Finally, 3" Downpipes are complete!, DSMRoadster, May-11-05 07:45 PM, #19

RE: Finally, 3" Downpipes are complete!, Team

Team

etx, May-12-05 04:37 AM, #20

RE: Finally, 3" Downpipes are complete!, Aggression, May-12-05 05:39 AM, #21

RE: Finally, 3" Downpipes are complete!, CarbonFiberRST, May-12-05 10:01 AM, #22

RE: Finally, 3" Downpipes are complete!, Team

Team

etx, May-12-05 11:02 AM, #23

RE: Finally, 3" Downpipes are complete!, Team

Team

etx, May-12-05 12:11 PM, #24

Ordering page is live!, Team

Team

etx, May-13-05 11:09 AM, #25

RE: Ordering page is live!, Moderator

Moderator

xcasbonx, May-13-05 11:45 AM, #26

RE: Ordering page is live!, BumpinTalon, May-13-05 01:12 PM, #27

RE: Ordering page is live!, Moderator

Moderator

EvuLFleA, Jun-01-05 06:18 AM, #28

RE: Ordering page is live!, xceler8, Jun-04-05 05:53 PM, #29

downshift311	May-11-05 05:36 AM
Member since Aug 04th 2003 32 posts,

#85863, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 0

Hell yes!
Count me in.. let me know how I can order one. ^^

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	May-11-05 05:56 AM
Donating 2GNT member 9740 posts,

#85865, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 1

Originally posted by downshift311
Hell yes! Count me in.. let me know how I can order one. ^^

Paypal

wait until I get the pics up tonight. I have some shots of the downpipe installed on a stock 95 Talon with my hrc turbo and mani on it. Then I have some of the final product, with the PC on it.

Another thing I forgot to mention! AC, the pipe clears the AC Compressor. But, for it to clear the AC lines you have to bend them, and when I say bend them I mean bend them a lot. I'd also be a good idea to put some heat wrap on the lines, but that's up to you as the downpipes do not enclude any type of heat wrap. They do come with Upper and lower 3" sections, one 3" gasket and Turbo->Upper jam nuts, upper->lower bolts, and lower->cat bolts. One last thing, These being three inch pipes with three inch flanges it will NOT blot up to the stock Cat. You will need a 2.5" or 3" cat/test pipe. I would recommend picking one up from ERT. You could probably hack something up to the stock cat, but that's up to you. It's very possible you will need to remove the turbo to install the pipe on it, then reinstall the whole assembly as one like the HRC std pipe. Pics will be up asap!

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

downshift311	May-11-05 06:02 AM
Member since Aug 04th 2003 32 posts,

#85866, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 2

Originally posted by etx

Originally posted by downshift311 Hell yes! Count me in.. let me know how I can order one. ^^

Paypal

wait until I get the pics up tonight. I have some shots of the downpipe installed on a stock 95 Talon with my hrc turbo and mani on it. Then I have some of the final product, with the PC on it. Another thing I forgot to mention! AC, the pipe clears the AC Compressor. But, for it to clear the AC lines you have to bend them, and when I say bend them I mean bend them a lot. I'd also be a good idea to put some heat wrap on the lines, but that's up to you as the downpipes do not enclude any type of heat wrap. They do come with Upper and lower 3" sections, one 3" gasket and Turbo->Upper jam nuts, upper->lower bolts, and lower->cat bolts. One last thing, These being three inch pipes with three inch flanges it will NOT blot up to the stock Cat. You will need a 2.5" or 3" cat/test pipe. I would recommend picking one up from ERT. You could probably hack something up to the stock cat, but that's up to you. It's very possible you will need to remove the turbo to install the pipe on it, then reinstall the whole assembly as one like the HRC std pipe. Pics will be up asap!

Not a problem, already removed AC components... also have a 3" test pipe thats just been sitting waiting on this day to arrive. =P

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	May-11-05 06:03 AM
Donating 2GNT member 9740 posts,

#85867, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 3

Originally posted by downshift311
Not a problem, already removed AC components... also have a 3" test pipe thats just been sitting waiting on this day to arrive. =P

Oh man, you're ready to rock then. Check back tonight for Pics and ordering info.

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

downshift311	May-11-05 06:09 AM
Member since Aug 04th 2003 32 posts,

#85868, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 4

Originally posted by etx

Originally posted by downshift311 Not a problem, already removed AC components... also have a 3" test pipe thats just been sitting waiting on this day to arrive. =P

Oh man, you're ready to rock then. Check back tonight for Pics and ordering info.

I'll be here. emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

whodatt1	May-11-05 06:19 AM
Donating 2GNT member 2531 posts,

#85869, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 5

nice derek.. put them pics up quick.. if i did not have the 2.4 block I would be looking at these.

-97 GS (First project, 299 whp)(sold)
- 97 RS 2.6 last numbers: 306hp, 352tq @16psi (Dead, parted out)
- 99 GS OZ, Hahn Kit, 56k miles (Sold)
--------
- 00 Nissan Maxima GLE (Daily Driver)
- 02 Audi A4 1.8T Quattro

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

thedawg	May-11-05 07:06 AM
Donating 2GNT member 6287 posts,

#85870, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 6

Holy shit- you've got a finished, tested, warranted product, IN STOCK, and you're posting pictures before offering it for sale?!?

WHAT KIND OF 2GNT VENDOR ARE YOU?!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

EvuLFleA	May-11-05 07:36 AM
Old School 2GNTer 9791 posts,

#85871, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 7

Originally posted by thedawg
Holy shit- you've got a finished, tested, warranted product, IN STOCK, and you're posting pictures before offering it for sale?!? WHAT KIND OF 2GNT VENDOR ARE YOU?!

LMFAO.

------------------------------------------------
98 ESi
95 GS

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	May-11-05 07:40 AM
Member since Jun 15th 2003 10552 posts,

#85872, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 6

Originally posted by whodatt1
nice derek.. put them pics up quick.. if i did not have the 2.4 block I would be looking at these.

depends on your oil pan, i only had to extend the exhaust by about an inch. its no big deal emoji

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX

"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	May-11-05 08:08 AM
Donating 2GNT member 9740 posts,

#85874, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 9

Originally posted by turbo8u

Originally posted by whodatt1 nice derek.. put them pics up quick.. if i did not have the 2.4 block I would be looking at these.

depends on your oil pan, i only had to extend the exhaust by about an inch. its no big deal emoji

Yeah, any modifcation is kinda hard with the silicone powder on there.

Originally posted by EvuLFleA

Originally posted by thedawg Holy shit- you've got a finished, tested, warranted product, IN STOCK, and you're posting pictures before offering it for sale?!? WHAT KIND OF 2GNT VENDOR ARE YOU?!

LMFAO.

Heh, I'm special. emoji

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	May-11-05 08:46 AM
Member since Jun 15th 2003 10552 posts,

#85876, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 10

grind it off, cut cut weld weld

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX

"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

PiKapp504	May-11-05 08:57 AM
Member since Feb 22nd 2002 290 posts,

#85877, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 11

Any pics yet?

96 Indy Red Dodge Avenger I4 5spd
225.7whp/227.2wtq @ 10psi, currently running 12-14psi.
HRC Stage III turbo setup
JE 8.8:1 pistons
Eagle rods
block bored .020" over
GReddy FMIC w/ custom piping
1G crushed BOV
SPEC Stage 3 clutch
2.5" DP, 2.5" high flow cat, 3" ERT catback w/ Magnaflow muffler and 3" tip.
much much more...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

micyek	May-11-05 12:24 PM
Donating 2GNT member 5070 posts,

#85879, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 2
May-11-05 12:24 PM by micyek

Originally posted by etx
One last thing, These being three inch pipes with three inch flanges it will NOT blot up to the stock Cat. You will need a 2.5" or 3" cat/test pipe. I would recommend picking one up from ERT.

I'd like to plug XtremeRS's (Matt's) test pipes here to...quality product IMO

Cool beans Derek...if I didn't have a custom turbo ki...I mean everything...LOL I would look into what you've got to offer

getty up

-kent-

'98 Talon...gone, but not forgotten

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

ner947	May-11-05 09:58 AM
Donating 2GNT member 3168 posts,

#85878, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 0

So... How do you define a "HRC turbo kit"? The one with the 3 PITA studs like I have or the V band thing?

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	May-11-05 04:13 PM
Donating 2GNT member 9740 posts,

#85887, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 14
May-11-05 04:20 PM by etx

Originally posted by ner947
So... How do you define a "HRC turbo kit"? The one with the 3 PITA studs like I have or the V band thing?

Yep, Three pita studs. The v-clamp comes with the HRC eliminator downpipe.

Here are the pics. The powder is silicone powder, very different from regular ceramic powder. It doesn't look like ceramic powder, and it's mostly there to avoid oxidation on the pipe. It does clean up real well and looks really nice. The one on my car looks like it was born yesterday. emoji

Also if anyone wants to save $10 when they order let me know. I have a task for you and it only takes about 5 minutes of your time. emoji

I do not have an ordering page setup yet because i've been super busy at work. But my paypal address is etx313@gmail.com. Email or pm me with your full address before you order so I can calculate shipping costs and If anyone has any questions just shoot me an email or post your question here.

The first two are $250, $40 off the regular price of $290 because they are the first round. The welds aren't perfect in some spots, but they aren't bad. If you really care, I'd suggest waiting a bit and getting one at full price.

Edit: The upper section you see in the photos does not have any beads showing. That's only because I was bored and I ground it down. Others will not be lacking beads.

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

run4cvr	May-11-05 04:41 PM
Donating 2GNT member 2477 posts,

#85888, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 15

Good job

John 96 GS

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

powellds	May-11-05 04:44 PM
Member since Jul 06th 2003 916 posts,

#85889, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 16

Those are the shit if I may say so myself. Can you make one that will bolt up to a Turbonetics T3/T04E? Here's an ebay link of what it looks like if you need to see it. Let me know man, and keep up the good work! A+++++++
~Jeffo

Hey, have you seen my tail lights? Yeah, well get used to looking at them.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Dirty	May-11-05 05:03 PM
Member since May 08th 2002 1405 posts,

#85893, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 17

Good work man! As soon as my v-clamps come in, I'm gonna do mine. I'm glad I took my a/c out when I did my 2.5". That looks like it will be close. Keep it up.

"Natty Ride"

http://dirty.thisfreedumb.com/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DSMRoadster	May-11-05 07:45 PM
Donating 2GNT member 3445 posts,

#85898, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 18

I want one with a cutout Derek.

intricatelines.com/ -graphics and vinyls

"Tell them of us and say,
For their tomorrow,
We gave our today."
-- The Kohima Epitaph

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	May-12-05 04:37 AM
Donating 2GNT member 9740 posts,

#85903, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 19

Originally posted by DSMRoadster
I want one with a cutout Derek.

Cool, the cutout will sit right before the cat. I have one cutout in stock, but I'm waiting on flex pipes.

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Aggression	May-12-05 05:39 AM
Old School 2GNTer 3025 posts,

#85904, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 20

Damn you did a great job etx! They look sweet!

--------------------

- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

CarbonFiberRST	May-12-05 10:01 AM
Donating 2GNT member 1368 posts,

#85911, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 20

Originally posted by etx
but I'm waiting on flex pipes.

OH no! not this again!!

just kidding... emoji

will a quick time electronic cutout bolt up to your cutout?

Evo 8 - 12.3@113 circa 2009 (~330whp)
Now with BB Xona Rotor HTZ FP Red and ~450whp
2018 MSM Civic SI Ktuner TSP stage 1 w/ Honda hacked headunit.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	May-12-05 11:02 AM
Donating 2GNT member 9740 posts,

#85916, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 22

Originally posted by CarbonFiberRST

Originally posted by etx but I'm waiting on flex pipes.

OH no! not this again!! just kidding... emoji

will a quick time electronic cutout bolt up to your cutout?

Yep! That's the exact cutout I use, the flowtech.

I'm working on the ordering site right now. The first two are still up for sale so whoever want's them let me know. The ordering page will be done soon. But you can still pay with paypal.

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	May-12-05 12:11 PM
Donating 2GNT member 9740 posts,

#85921, "RE: Finally, 3" Downpipes are complete!"
In response to Reply # 23
May-12-05 12:15 PM by etx

Click here to order one at the discount price!

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	May-13-05 11:09 AM
Donating 2GNT member 9740 posts,

#85968, "Ordering page is live!"
In response to Reply # 24

http://www.etxrd.com/

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

xcasbonx	May-13-05 11:45 AM
Donating 2GNT member 2874 posts,

#85969, "RE: Ordering page is live!"
In response to Reply # 25

Man I wish I could get one of these for my T3...I'm still far away from looking to get a downpipe built though. Great work though!

http://www.dsmregistry.com/detail.php?carid=1030

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

BumpinTalon	May-13-05 01:12 PM
Member since Mar 23rd 2004 2381 posts,

#85972, "RE: Ordering page is live!"
In response to Reply # 26

looks good, real good, especially with the welds grounded down
might be interested in one... in the far far future haha, I have a good job, but I want a 300ZX twin turbo and am not sure if I am keepin the Talon past this summer... emoji

1995 Eagle Talon ESi

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

EvuLFleA	Jun-01-05 06:18 AM
Old School 2GNTer 9791 posts,

#86498, "RE: Ordering page is live!"
In response to Reply # 27

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=7976894218&ssPageName=STRK:MEWN:IT

Sweet.

------------------------------------------------
98 ESi
95 GS

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

xceler8	Jun-04-05 05:53 PM
Member since Jun 03rd 2005 269 posts,

#86589, "RE: Ordering page is live!"
In response to Reply # 28

i might be interested later in the summer. You should work on that one for a star kit 3 incher. Then my whole thing will be 3 inches...around!

It looks way sick though. How touch is it to powdercoat that stuff. Is it something i could do to like..my exhaust mani by chance?

Fully Built MS powered 99' GS Sport, Garrett T3/T04e 60 trim with one big ass intercooler!

Yeah, she runs...sorta!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

Turbo/Nitrous Tech

topic #85862

Previous topic | Next topic

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com

Generated in 0.062 seconds, executing 72 queries.