hahn says you have to grind off part of the valve cover and head where the valve cover bolts to it. i was wondering what you would use and where to get those tools i have a wizwheel for cleaning off old gaskets. i put a grinding stone in it and it didnt work all that great. post you ideas please!!!!!

and does the fuel supply line come from the left or right side of the fuel rail when looking in the egine bay from the front of the car on a 99 gs?

when looking at the car the fuel supply should come in from the right side
just find the test port the fuel in line will be on the opposite end

are you splitting the fuel line and giveing each rail its own return line back to the fpr or are you running them in a series

as far as the gringing goes
a good old fashion dremel with a carbide grinding stone should work
its just aluminum

1996 eclipse GS-T
1968 Ford Mustang
2004 Suzuki GSXR600
2006 Honda CBR1000RR
Decisions Decisions