hahn says you have to grind off part of the valve cover and head where the valve cover bolts to it. i was wondering what you would use and where to get those tools i have a wizwheel for cleaning off old gaskets. i put a grinding stone in it and it didnt work all that great. post you ideas please!!!!!

and does the fuel supply line come from the left or right side of the fuel rail when looking in the egine bay from the front of the car on a 99 gs?

when looking at the car the fuel supply should come in from the right side
just find the test port the fuel in line will be on the opposite end

are you splitting the fuel line and giveing each rail its own return line back to the fpr or are you running them in a series

as far as the gringing goes
a good old fashion dremel with a carbide grinding stone should work
its just aluminum

Originally posted by baxsom
when looking at the car the fuel supply should come in from the right side just find the test port the fuel in line will be on the opposite end are you splitting the fuel line and giveing each rail its own return line back to the fpr or are you running them in a series as far as the gringing goes a good old fashion dremel with a carbide grinding stone should work its just aluminum

thanks Im pretty sure i found the fuel line it has a weird fittng on it,and the left side went to my cartech fmu. I am running the fuel lines in series. I am going to the store to find a carbide grinding stone thanks again!