#83726, "RE: Anyone got any pics of SMIC installs" In response to Reply # 0 Mar-14-05 05:07 PM by fastpunk
I have the hahn smic I'll snap some pics quick and upload them to my sounddomain page. Excuse the bad night shots and dirty engine bay. Hope this helps.
#83732, "RE: Anyone got any pics of SMIC installs" In response to Reply # 3
I'll snap some pictures when I'm near my car next. (It's stored an hour away) I've got a 1st gen SMIC right behind the drivers side hole in the bumper near the fog light. I've also got two custom sprayers to cool it off, and a peice of plastic cut out behind the I/C so the air goes into the wheel well (There's screen to protect the I/C. It's riveted into place with custom mounts. Pictures will help me explain.
It might be a week before I can get them, but I can't host them anywhere. Do you have an email?
Brian
Red 97 Eclipse GS (420a) MTX Custom Garrett T3 Turbo system Megasquirt w/52 lb/hr injectors & a Walbro 255 Kicker/Alpine Audio (3 amps, 2 subs) 90 Cav 2.2 TBI auto (winter) <- yeah, it's fast
#83735, "RE: Anyone got any pics of SMIC installs" In response to Reply # 4
Originally posted by ForceFed420a I'll snap some pictures when I'm near my car next. (It's stored an hour away) I've got a 1st gen SMIC right behind the drivers side hole in the bumper near the fog light. I've also got two custom sprayers to cool it off, and a peice of plastic cut out behind the I/C so the air goes into the wheel well (There's screen to protect the I/C. It's riveted into place with custom mounts. Pictures will help me explain. It might be a week before I can get them, but I can't host them anywhere. Do you have an email? Brian
Sweet. That'd be awesome of you.
Yea you could send the pics to blizare at gmail.com (replace the at with @)
I am also gonna pm wtremers to see what he's got.
I eat emo kids for breakfast
1995 Eagle Talon (SOLD) 72' SuperBeetle 72' Standard Beetle 56' Deluxe Beetle
#84669, "RE: Anyone got any pics of SMIC installs" In response to Reply # 1
Originally posted by fastpunk I have the hahn smic I'll snap some pics quick and upload them to my sounddomain page. Excuse the bad night shots and dirty engine bay. Hope this helps. http://www.cardomain.com/memberpage/29999/2
#84736, "RE: Anyone got any pics of SMIC installs" In response to Reply # 11
Originally posted by SILVERNT
Originally posted by fastpunk I have the hahn smic I'll snap some pics quick and upload them to my sounddomain page. Excuse the bad night shots and dirty engine bay. Hope this helps. http://www.cardomain.com/memberpage/29999/2
hey Tyler, hows the new motor?
Still idles like shit but other than it's great.I just need to find a shop with a vacutec machine to find the leak.
#84782, "RE: Anyone got any pics of SMIC installs" In response to Reply # 14
check out the link in my sig. I think there are a few smic pics in there.
http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions 95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD 93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD 2006 Scion tC
#84809, "RE: Anyone got any pics of SMIC installs" In response to Reply # 15
Originally posted by optimuspeterson check out the link in my sig. I think there are a few smic pics in there.
i have pics at home... dunno how to post them, but i can describe it to you lol. i took out that black plastic cover under the fuse box. the inlet that comes in at 90* to the ic is sticking out through that hole(with the coupler on it) the outlet with the little bend in it is coming out down by the lower radiator hose. i had to butcher up the splash shield a little tho. only problem is i only have one bolt holding it on but its holding fine, and im thinking it will hold even better with pipes connected to it. if you look up under there there is a beam running front to back, and there are 2 bolts in it. i removed the one farthest back, and bought a long bolt and a bunch of washers. the bolt is M10 fine threading (1.25). i had to bend one of the mounting brackets a little bit, but it seems to be working good.
-Chris 1999 Eclipse T-GS 2.4 Project is Officially underway
#84823, "RE: Anyone got any pics of SMIC installs" In response to Reply # 17
Originally posted by Dan Zeller send me your pics please, I will get them posted for you.
alright, there still in my camera and i dont think i took any pics of where the couplers came out so i will take a couple more tomarrow. but i dont feel like getting the ones i have on the comp now, plus i have to do some editing on paint to show where the bolts i used go. so ill email you them tomarrow night.
-Chris 1999 Eclipse T-GS 2.4 Project is Officially underway
#84826, "RE: Anyone got any pics of SMIC installs" In response to Reply # 18
These are the only good pics I could fine of my old 1st gen SMIC install..i think you can get the idea though..
The view from the bottom of the car. If you look closely, you can see where I bolted the small bracket on the IC to the frame rail of the car. there is a hole already there in the frame, and I just used a normal nut and bolt. This holds the IC ok, but i used 2 support brackets to mount it more firmly to the car. I also used some roof flashing to make air diflectors to help concentrate airflow to the IC only, through the fog and air dam openings. It worked quite well actually.
Top view..Its a tight fit behind the fuse box wiring harness..You have to take out a small black plastic cover under the fuse box, and you may have to cut out or enlarge the stock air intake opening in the fuse box bracket.
View of the top and bottom and cut fuse box bracket.
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#84836, "RE: Anyone got any pics of SMIC installs" In response to Reply # 19
Originally posted by XtremeRS These are the only good pics I could fine of my old 1st gen SMIC install..i think you can get the idea though.. The view from the bottom of the car. If you look closely, you can see where I bolted the small bracket on the IC to the frame rail of the car. there is a hole already there in the frame, and I just used a normal nut and bolt. This holds the IC ok, but i used 2 support brackets to mount it more firmly to the car. I also used some roof flashing to make air diflectors to help concentrate airflow to the IC only, through the fog and air dam openings. It worked quite well actually. Top view..Its a tight fit behind the fuse box wiring harness..You have to take out a small black plastic cover under the fuse box, and you may have to cut out or enlarge the stock air intake opening in the fuse box bracket. View of the top and bottom and cut fuse box bracket.
damn your pics, and the way you mounted it beat mine lol. but ill send you those pics to post later tonight anyways just to give more ideas.
-Chris 1999 Eclipse T-GS 2.4 Project is Officially underway
#84928, "RE: Anyone got any pics of SMIC installs" In response to Reply # 21
hey so did anyone who did this wanna inform me on the piping, did you have it custom done or was it bought somewhere cause i'm buying the star kit from scarface and he's got a 1g smic with it but no piping TIA
I contributed to the Wiki! EVO IX - just a really expensive boost gauge and a K&N air filter 96 Eclipse RS -awaiting registration and inspection 95 Eclipse GS - parts car Mods/Profile - http://www.2gnt.com/index.php?d=cs82685
Search
Printer-friendly copy
0 Users in Chat
but its holding fine, and im thinking it will hold even better with pipes connected to it. if you look up under there there is a beam running front to back, and there are 2 bolts in it. i removed the one farthest back, and bought a long bolt and a bunch of washers. the bolt is M10 fine threading (1.25). i had to bend one of the mounting brackets a little bit, but it seems to be working good.
