what FMIC's do you guys typically use. i want a big'un.

"but me, my skin is brown and my manner is tough."
-talib kweli

BKR5E-11's
cone filter
brospeed muffler from mx-3
exhaust leak (mad power gain)

http://www.ocaddict.com

thanks beefgg for the sig

if i had to modify one to fit it please include that info as well. thanks.

"but me, my skin is brown and my manner is tough."
-talib kweli

BKR5E-11's
cone filter
brospeed muffler from mx-3
exhaust leak (mad power gain)

http://www.ocaddict.com

thanks beefgg for the sig

I'm currently using the STAR IC, but it's a POS and i'm looking at other options. We'll see..

_____________________________________________
-Dino Yancey
I'm so bad, i should be in detention.


For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, ckick HERE:
http://www.heavenz-not-0verflowing.com/files/

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

i am using a HRC fmic it's core is 26x9x3 it is pretty big ad about 5 inches overall for the endtanks it works pretty good!

Rest In Peace Heidi Doggy

I got the Apex'i Skyline R33 GTR intercooler. Just routed the piping to run on both sides.

I'm using the HRC FMIC. Very good quality, and HUGE.
Look for my posts on it in the archives.





-Jeff
1999 Mitsubishi Eclipse GS-T'd

http://gs.dsmpower.com

thanks i may just get the HRC one then.

"Canada - The Maple Leaf State"
-Me

BKR5E-11's
cone filter
brospeed muffler from mx-3
exhaust leak (mad power gain)

http://www.ocaddict.com

thanks beefgg for the sig

I'm having a starion intercooler modified at the moment. Just go to a junk yard and look around. A Saab 5000 intercooler is massive, a Saab 900 IC will make a nice easy to install sidemount. MX6 or Probe intercooler are alright also, 27 row, if you weld two of those bad boys together you will have one awesome intercooler.


95' Eclipse RS
AFX Pulley | Autometer Bezel Gauge Holder & Modified A/F Ratio Gauge | B&M Super Oil Cooler | Energy Suspension Shifter Bushings | JAZ Oil Catchcan | Performance Muffler | HKS Air Filter | KYB AGX Shox | Skunk2 Coilovers | FU, RU, RL, and RRE FL Tie/Strut Bars | RS to TSi Rear Disc Mod | RS to TSi upgraded F&R Sway Bar | 97' Spyder Eclipse 5 Spoke Wheels | HKS TYPE 1 Turbo Timer | Star Stage 1 T3/T04E BB Turbo Kit | Schroth Autocontrol 3-Point Harness | and 1 HiGhLy SkIlLeD DrIvEr! |

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

raizin- where did you get a skyline intercooler? and how much?

2GNT Member #76, since Fall 1999

Drives: 2004 Mazda RX-8
Drove: 1999 Saab 9-5 SE
1999 Eclipse GS Hahn Stage 1

A friend from my crew brought two of them back from Japan. He put one of them on his Supra TT. You can order them from Options Auto salon.. they're about 1300.00 bucks.

Jeff...How much did you have to shave off your front fascia to get the front mount to fit??

Robert Parkhurst
toykilla@comcast.net

Spearco FMIC, core = 22x7x2.5


http://www.asog.net/phantom/

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

I have been looking at intercoolers. The intercooler from a Ford 7.3L is 30x18x2. Sounds like that's too tall. Does anyone know? Thanks.

Dom

LAST EDITED ON 04-Nov-01 AT 02:03 PM (PST)

You have to shave about 2 inches off the inner most part of the opening in the middle, and a 2"x"20" section from the bumper reinforcement. If you do it really well, you can't tell it is even cut.
Oh, you also have to cut a small portion out of the left side of the bumper reinforcement for the upper IC pipe to fit through.

-Jeff
1999 Mitsubishi Eclipse GS-T'd and HRC'd

http://gs.dsmpower.com

Jeff, I put mine on and shaved the hell out of it but the front fascia wont go back on properly. It's kinda a force fit than anything. Its on but I can tell the part near the turn signals should be more straight. What aftermarket front fascia would go over it without shaving??

Robert Parkhurst
toykilla@comcast.net