All i have left is the fuel system. I have the SFMU, but have NO idea how to hook it up. I read the whole instructions that someone posted on 2gnt, but still make no sense at all. Can someone get me like a diagram or something? Also, i have all these tubes (bought the kit used) and i cant figure out which goes to the BOV and which goes where... also, i cant figure out the pressure switch/adapter... can someone get me pics of those or diagrams? I just cant figure it out!


here is the pic of the tubes i got left...

is it just me or does most of that look like vaccum line with boost controler hooked up???

You looked at hahns instructions??? the ones in my sig.

I had a 95 so all i needed to do was put an inline pump in and hook the fpr in between the incoming fuel line and the fuel rail. Sorry didn't help much.


what kit as that for? I haven't seen one with the braided fuel lines before.

EDIT: Do you have the oil lines hooked up?

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

Youre right it looks like a Turbo XS mbc. I have one sitting in the garage, same color.

Evo VIII, 98 Eclipse GS

specify...FPR on fuel rail or back by the fuel tank? It looks like you got a bunch of vac lines and ss fuel lines left. This is for the star kit right?

It looks like an oil feed line, oil return line, fuel line from rail to SFMU, vacuum hoses, and some misc. SS hose.

96 Indy Red Dodge Avenger I4 5spd
225.7whp/227.2wtq @ 10psi, currently running 12-14psi.
HRC Stage III turbo setup
JE 8.8:1 pistons
Eagle rods
block bored .020" over
GReddy FMIC w/ custom piping
1G crushed BOV
SPEC Stage 3 clutch
2.5" DP, 2.5" high flow cat, 3" ERT catback w/ Magnaflow muffler and 3" tip.
much much more...

http://www.2gnt.com/nuke/modules.php?name=Sections&op=viewarticle&artid=82

http://www.2gnt.com/nuke/modules.php?name=Sections&op=viewarticle&artid=58

Have you looked at these?

-Roman

Hey I am getting ready to order all the parts, but the only thing is the Parts # for the guage is the only part # that came back with no results found on summit. When I did a regular search it came up with 3 pages of gauges. The prices go from $17 to $229. Which gauge did you all get?

I am ordering everything off the list on this diagram, because I already have the SFMU and I am planning on buying the walbro 255 from summit too, but can't find the 255 on summit at all.

So if someone could give me the parts # for the gauge and the 255 I would really appreciate it.

--------------------


- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

Well I see a oil tee and -4AN feed line there. You're gonna want to hook that up. The vacume lines go from a nipple on the upper intake to the boost controller (that blue thing on the lines) and then to the wastegate actuator on the turbo if you have an internal WG, or to the wastegate on the exhaust mani if it's external.

So again, a line come from the intake manifold, over to the bov/turbo area up front, splits with a tee, one goes to the BOV and the other goes through the boost controller and the the wastegate. And for the love of darwin hook up the oil lines before you start it up.

____________________________________________________
four nails four corners four riders and four horses

does anyone live in the state of washington that can help me out with this? i just have a couple more things to do! but i am having a hard time figuring it out for some reason?

where in washington. I know there is a few. I live in oregon.

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

I live in spanaway washinton, off of exit 123 on I-5. Do you think you might want to come out and help a fellow 2gnt brother out? you have no idea how much i would appreciate that!

I live in Portland..

Your off exit 123...kind of far for me 130+ miles

_____________________________________
Scott
90' GSX, 06' Effo SSL

(parting out 95 GS)

Yeah that is pretty far, but if someone could come help, that would mean a lot. Maybe i can offer some food and drinks (not beer though, im only 18) ALSO, does anyone have a pic of there AN fitting that goes to the oil pan? That should be the last piece i need..

There is no one in washington who would like to help a fellow 2gnt'er out? ? If not, maybe we can get a little meet together so someone can atleast check all my stuff out if i get it running... I would like to organize a meet anyway!