#80446, "Anyone from pheonix AR or right by there"
I have found somone to make my manifold from full-race engineering.. They make the best manifolds I have ever seen. The only prob is that they need the car there to get the measurements from the car to be able to make it. I live in minnesota 1,700 miles away. They said they would only need the car over the course of one day. If there is anyone from that area that could do this for me to save me a drive it would be greatly apreciated. If it is that big of an inconvenience than I could even through out some cash for doing it.Prefered a car that still retains A/C cuz I will be retaining mine.. Please let me know if any of you guys know anyone from that area that would be willing to do this.. Thanx Matt
#80447, "RE: Anyone from pheonix AR or right by there" In response to Reply # 0
I would be down but I live in Oregon and I don't really want to take my 420a to go snowplowing through the mountains...You might have to wait until winter is over...
I think your a/c compressor is going to give you some problems too....My S20G doesn't compare to the size of that GT40 but I had problems fitting in the 3" downpipe...So I just took it out.
With that turbo you might want to consider a 3.5" DP
Do they have a website?
_____________________________________ Scott 90' GSX, 06' Effo SSL
#80460, "RE: Anyone from pheonix AR or right by there" In response to Reply # 5
Originally posted by turbo8u 3" piping will flow upwards of 600hp all day, no problem 3.5 will give less backpressure yes, but its overkill in my opinion
Yeah, I know it is still bad ass though..
_____________________________________ Scott 90' GSX, 06' Effo SSL
#80486, "RE: Anyone from pheonix AR or right by there" In response to Reply # 9
Hmm yeah the web site is http://www.full-race.com. The # is (866) FULL-RACE. If I don't find anyone on any post than I will try to get ahold of them two guys.. Oh and yes they make a very buetifull manifold, and 3.5 dp is not an option with my thermal 3" exhaust. 3" down pipe is just fine. Thanx for all the help I will be extreemly happy if I can acually find someone to do this..
#80522, "RE: Anyone from pheonix AR or right by there" In response to Reply # 12
That manifold is for our cars? Man, if people keep making stuff I wont finish my car. Like a little kid in a candy store. What's next, hmmm, a nice tubular manifold and a methanol injection kit, nice.
#80523, "RE: Anyone from pheonix AR or right by there" In response to Reply # 13
Originally posted by TXTurboGS That manifold is for our cars? Man, if people keep making stuff I wont finish my car. Like a little kid in a candy store. What's next, hmmm, a nice tubular manifold and a methanol injection kit, nice.
They dont make one for our cars yet. I am going by there Saturday to see what they have to say about possibly making one.
#80527, "RE: Anyone from pheonix AR or right by there" In response to Reply # 15
Originally posted by run4cvr
Originally posted by TXTurboGS That manifold is for our cars? Man, if people keep making stuff I wont finish my car. Like a little kid in a candy store. What's next, hmmm, a nice tubular manifold and a methanol injection kit, nice.
They dont make one for our cars yet. I am going by there Saturday to see what they have to say about possibly making one.
I thought we were going intercooler shopping. Looks to me like its a Honda shop too. Considering Daisy is still dead (cough), I wouldn't mind parting with her a couple days, but she's not going anywhere and I doubt they can get proper measurements in a bay with no engine, or with a head outside the bay. I guess we'll see wat we see this weekend, no?
And yeah, AR is Arkansas, son. Better learn that.
"By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest." - Confucius
#80985, "RE: Anyone from pheonix AR or right by there" In response to Reply # 15
Originally posted by 99gspsi I have already talked to them, they will make it they just need a car to get the measurements off of. Thanks for all the help
We need a bump on this one!
I'm willing to pay someone to take their 2GNT to full-race to do this...I PM 99gspsi for a update but no response. The UPS god is coming with a GT35R so I need to have this manifold made! I can't drive my car to Phoenix either...
If somebody does this my car doesn't have A/C anymore (more room for DP) and does have the Fluidyne with FAL dual fans (less room for manifold)
Please post in the full-race forums under DSM for the support of a 420a manifold needed...We need to push the vendors to make more products for our car! Thanks guys
_____________________________________ Scott 90' GSX, 06' Effo SSL
#80526, "RE: Anyone from pheonix AR or right by there" In response to Reply # 14
Originally posted by run4cvr
Originally posted by TXTurboGS That manifold is for our cars? Man, if people keep making stuff I wont finish my car. Like a little kid in a candy store. What's next, hmmm, a nice tubular manifold and a methanol injection kit, nice.
They dont make one for our cars yet. I am going by there Saturday to see what they have to say about possibly making one.
I thought we were going intercooler shopping. Looks to me like its a Honda shop too. Considering Daisy is still dead (cough), I wouldn't mind parting with her a couple days, but she's not going anywhere and I doubt they can get proper measurements in a bay with no engine, or with a head outside the bay. I guess we'll see wat we see this weekend, no?
And yeah, AR is Arkansas, son. Better learn that.
"By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest." - Confucius
#80539, "RE: Anyone from pheonix AR or right by there" In response to Reply # 18
Originally posted by Blizare holy dbl post dr. your slipping.
Do0d. This site was crawling when I tried to post that. It would just sit there and sit there and do nothing, then it would pop up a "Document contains no data" window. I never saw either of those until just now.
"By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest." - Confucius
Search
Printer-friendly copy
1 User in Chat
3.5 downpipe is no joke, thats ginormous and talk about insta-spool
