Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 1 User in Chat
Top 2GNT Technical Turbo/Nitrous Tech topic #77715
View in linear mode

Subject: "Machined Head Pictures" Previous topic | Next topic
Eclipse2NROct-07-04 12:17 PM
Member since Nov 25th 2002
581 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77715, "Machined Head Pictures"


          

In case anyone is interested, I picked up my head from the machine shop this evening. Had a full valve job done, and had the mating surfaces planed. They said it was a little warped, and ended up taking off about .008". Not too bad. Got brand new valve seals too.












A lot more pictures of the whole project can be found on my web site, www.team2nr.com , under the Projects section. Have a look!



1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / http://www.team2nr.com
Mark Galyan - Indianapolis, Indiana

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic
RE: Machined Head Pictures, SILVERNT, Oct-07-04 12:29 PM, #1
RE: Machined Head Pictures, turbo8u, Oct-07-04 12:31 PM, #2
      RE: Machined Head Pictures, thedawg, Oct-07-04 12:40 PM, #3
           RE: Machined Head Pictures, TeamMetalJim, Oct-07-04 03:19 PM, #4
                RE: Machined Head Pictures, Eclipse2NR, Oct-07-04 03:26 PM, #5
                     RE: Machined Head Pictures, soulcontroller, Oct-07-04 05:28 PM, #6
                          RE: Machined Head Pictures, Teamner947, Oct-07-04 07:04 PM, #7
                               RE: Machined Head Pictures, Eclipse2NR, Oct-08-04 05:33 PM, #8
                                    RE: Machined Head Pictures, dizzastic, Oct-08-04 06:13 PM, #9
                                         RE: Machined Head Pictures, xtrickedeclipsex, Oct-11-04 07:51 PM, #10
                                              RE: Machined Head Pictures, TeamMetalJim, Oct-11-04 08:52 PM, #11
                                                   RE: Machined Head Pictures, techboy, Oct-12-04 05:54 AM, #12
                                                        RE: Machined Head Pictures, ModeratorDR1665v2, Oct-12-04 02:07 PM, #13
                                                             RE: Machined Head Pictures, dizzastic, Oct-12-04 06:45 PM, #14
                                                                  RE: Machined Head Pictures, SILVERNT, Oct-12-04 09:18 PM, #15
                                                                       RE: Machined Head Pictures, Ark, Oct-13-04 10:13 AM, #16

SILVERNTOct-07-04 12:29 PM
Member since Oct 05th 2002
4543 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77717, "RE: Machined Head Pictures"
In response to Reply # 0

          

mines prettier

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
turbo8uOct-07-04 12:31 PM
Member since Jun 15th 2003
10552 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77718, "RE: Machined Head Pictures"
In response to Reply # 1



          

if you listen closely you can hear it screaming 'PORT ME!'

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
thedawgOct-07-04 12:40 PM
Donating 2GNT member
6287 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77721, "RE: Machined Head Pictures"
In response to Reply # 2

          

Mine flows more.

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
TeamMetalJimOct-07-04 03:19 PM
Donating 2GNT member
2135 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77730, "RE: Machined Head Pictures"
In response to Reply # 3



          

Mine has blue and yellow superflow power ink.




95 Eclipse RS : 5 speed
15.7 @ 87.9mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
Eclipse2NROct-07-04 03:26 PM
Member since Nov 25th 2002
581 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77731, "RE: Machined Head Pictures"
In response to Reply # 4

          

Damn you all... I just got my head back and now I want SS valves..

I'll have pictures of my block posted in the next couple of weeks for you guys to reply with your better looking blocks too emoji


1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / http://www.team2nr.com
Mark Galyan - Indianapolis, Indiana

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
soulcontrollerOct-07-04 05:28 PM
Donating 2GNT member
2490 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77741, "RE: Machined Head Pictures"
In response to Reply # 5

          

i guess ill join in.

______________________________
Matt D.
'06 Evo IX SE
'98 RS-T 13.8 @ 106.1

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                        
Teamner947Oct-07-04 07:04 PM
Donating 2GNT member
3168 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77746, "RE: Machined Head Pictures"
In response to Reply # 6



          

Might as well jump on the bandwagon.

Those were the really cool cam gears! The belt rode on them about 50% of the way from falling off so there was less friction. I picked up 12 WHP. Ugh.




2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                            
Eclipse2NROct-08-04 05:33 PM
Member since Nov 25th 2002
581 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77781, "RE: Machined Head Pictures"
In response to Reply # 7

          

Did some work to my valve cover...








1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / http://www.team2nr.com
Mark Galyan - Indianapolis, Indiana

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                
dizzasticOct-08-04 06:13 PM
Member since Jun 24th 2004
95 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77783, "RE: Machined Head Pictures"
In response to Reply # 8

          

Quick question what CFM are you guy's flowing on your heads and what did valve train you using if you dont mind? Whats the max our heads can flow

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                    
xtrickedeclipsexOct-11-04 07:51 PM
Member since Oct 13th 2003
620 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77951, "RE: Machined Head Pictures"
In response to Reply # 9

          

Originally posted by dizzastic
Quick question what CFM are you guy's flowing on your heads and what did valve train you using if you dont mind? Whats the max our heads can flow



I had a nice port done...we put it on the flowbench...check it out


intake stock:-----ported:
.050" 52.8---------52.7 cfm
.100 93.4---------93.8
.150 120.8--------124.5
.200 143.6--------147.3
.250 164.7--------172.1
.300 181.9--------197.4
.350 194.8--------216.3
.400 204.1--------231.6
.450 211.2--------242.0
.500 215.2--------249.8
.550 218.7---------254.0

Exhaust stock ported
.050" 35.3 ------39.0
.100 58.1--------60.2
.150 91.9---------95.0
.200 120.9--------128.1
.250 137.1--------154.9
.300 145.5---------167.6
.350 151.1----------179.2
.400 150.8------------186.5
.450 same--------------189.1
.500 same--------------191.8

---------------------------------------

"Oh yea, well...My manifold does cool twisty things"

www.EnhancedMotorSports.com

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                        
TeamMetalJimOct-11-04 08:52 PM
Donating 2GNT member
2135 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77956, "RE: Machined Head Pictures"
In response to Reply # 10



          

Hey, thats nice. Do you know what vacuum pressure they use on their flowbench?


95 Eclipse RS : 5 speed
15.7 @ 87.9mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                            
techboyOct-12-04 05:54 AM
Member since May 20th 2002
1662 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#77978, "RE: Machined Head Pictures"
In response to Reply # 11

          

You guys sound like a bunch of 1st graders at show and tell. I'm just glad my head is working .... emoji


1999 Eclipse GST 4G63

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                                
ModeratorDR1665v2Oct-12-04 02:07 PM
Member since Sep 07th 2004
1223 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#78010, "RE: Machined Head Pictures"
In response to Reply # 12

          

Couldn't find a picture of my SS valves, but I wanted to play too... emoji


This was built by ERT. Probably the reason why it's fine and the rest of the engine is scrap metal right now... emoji

"By three methods we may learn wisdom:
First, by reflection, which is noblest;
Second, by imitation, which is easiest;
and third by experience, which is the bitterest." - Confucius

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                                    
dizzasticOct-12-04 06:45 PM
Member since Jun 24th 2004
95 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#78034, "RE: Machined Head Pictures"
In response to Reply # 13

          

Thank for the flowbench numbers. ERT did an awsome job on that head..sorry bout the rest of the engine emoji

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                                        
SILVERNTOct-12-04 09:18 PM
Member since Oct 05th 2002
4543 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#78037, "RE: Machined Head Pictures"
In response to Reply # 14

          

haha, i remember that head, driggs, did you slit your wrist in that pic?

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                                            
ArkOct-13-04 10:13 AM
Member since Aug 31st 2004
1570 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#78081, "RE: Machined Head Pictures"
In response to Reply # 15

          

Originally posted by SILVERNT
haha, i remember that head, driggs, did you slit your wrist in that pic?

Those tubby fingers almost look like John's but I could be off. emoji

__________________________________________
~Chris

forums.kaptainmyke.com/index.php?&act=garage&CODE=12&CID=8
- AGP CAI
- AGP EVM
- MOPAR Stage 1 ECU
- 500cc Injectors

And he wonders why he couldn't make her happy...and someone obviously hasnt moved on. lol

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Turbo/Nitrous Tech topic #77715 Previous topic | Next topic
   

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.066 seconds, executing 46 queries.