2GNT.com Forums - Viewing topic - The End Has Come.

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

0 Users in Chat

Turbo/Nitrous Tech

topic #74050

View in linear mode

Subject: "The End Has Come."

Previous topic | Next topic

solareclipse98	Jul-17-04 10:53 AM
Member since Jul 07th 2003 385 posts,

#74050, "The End Has Come."

Dear Fellow Turbo 2GNT' People.

It breaks my heart to tell you that last night on the track Solar blew it's third engine. I take all the blame for not having it properly tuned before running it. The Dyno's in this town where all booked up.

I ran once and missed a gear and still ran a 15second qtr mile missing a gear going from 3rd to 5th. On my second run i ran a 15second qtr mile even blowing my engine half way down the track.

I have decided to part solar out. It used to be fun to work on this car now it's just frustrating and I'm tired of trying to make this work... I haven't had very much support lately on this board so i'm worried that if i went for the 4th engine I would really be on my own.

If anyone is interested I have a lot to offer on this car... from electronics to axles to slicks and what not. I do have a vennom manifold and that is going to collente. The block is still good and so is the head, It's obvious i just blew my ringlands.. I have no compresssion at all the bitch won't even start..

I'm even going to get rid of the bodykit so if any of you are interested let me know I will give you a good deal.. Financial reasons aren't why i'm not rebuilding... It's the frustration and the stress of this car that I think it's time to part with it.

I just want to get rid of the car so I'm easy going on prices...
I think i'm going to venture into the land of the Toyota Supra or 300Zx.... My heart wants to me to keep my 2gnt but i just don't think i have the motivation to persue it any further.

I will stop by from time to time to see how all of you are doing and plan on being here for awhile at least until this thing is parted out.

Formally Project Solar Eclipse
Now Entering 300ZX Land.

Jim Wolf ECU w/ Boost Jets
Jim Wolf Pop Charger Intake
Eibach Pro-Kit Lowering Springs w/ Fully Adjustable Gas Shocks
B&B Exhaust - 3" w/ Dual 4.5 Oval Tips w/ 3" Test Pipes
Konig Five-O 17X8 Rims w/ Polished Lip
Blitz Turbo Timer /w Boost Gauge
Freshly Painted Calipers
Stillen Unorthodox Pulley
Stillen Front Nose / Bumper
Stillen Short Shifter
New RPS Clutch / Pressure Plate / Flywheel - Holds 550 ft lbs of Torque
New Fully-Built 5-Speed Transmission
New Howe Radiator w/ 18" Electric Fan w/ Auto Thermostat Controller
New Yokohama ES100 Tires All Around
New Tension Rods
New Fuel Injectors
New Spark Plugs
New Motor Mounts
New Vacuum Hoses
New Heater Core
New Fuel Filter
New Ignition Control Module
New Hicas (4-Wheel Steering) Lines
New Brake Pads / Brake Lines / Master Cylinder

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: The End Has Come., eclipse982nrRST, Jul-17-04 11:05 AM, #1

RE: The End Has Come., HadesOmega, Jul-17-04 11:55 AM, #2

RE: The End Has Come., djtrickee, Jul-17-04 12:18 PM, #3

RE: The End Has Come., MrSlick, Jul-17-04 12:35 PM, #4

Sorry to Hear that man hit me up I'm in sandy, Nick5102, Jul-17-04 01:35 PM, #5

RE: Sorry to Hear that man hit me up I'm in sandy, siueclipse, Jul-17-04 02:13 PM, #6

RE: Sorry to Hear that man hit me up I'm in sandy, KTECLIPSE, Jul-17-04 04:08 PM, #7

RE: Sorry to Hear that man hit me up I'm in sandy, grain, Jul-17-04 04:56 PM, #8

RE: Sorry to Hear that man hit me up I'm in sandy, Team

Team

XtremeRS, Jul-17-04 06:17 PM, #9

RE: Sorry to Hear that man hit me up I'm in sandy, techboy, Jul-17-04 07:20 PM, #10

RE: Sorry to Hear that man hit me up I'm in sandy, solareclipse98, Jul-17-04 07:17 PM, #11

RE: Sorry to Hear that man hit me up I'm in sandy, siueclipse, Jul-18-04 09:04 AM, #12

RE: Sorry to Hear that man hit me up I'm in sandy, Mattchew, Jul-18-04 03:29 PM, #13

RE: Sorry to Hear that man hit me up I'm in sandy, siueclipse, Jul-18-04 03:59 PM, #14

RE: Sorry to Hear that man hit me up I'm in sandy, Mattchew, Jul-18-04 04:27 PM, #15

RE: Sorry to Hear that man hit me up I'm in sandy, siueclipse, Jul-18-04 04:43 PM, #16

RE: Sorry to Hear that man hit me up I'm in sandy, Mattchew, Jul-18-04 04:58 PM, #17

RE: Sorry to Hear that man hit me up I'm in sandy, xEclipsE RaceRx, Jul-18-04 07:48 PM, #18

RE: Sorry to Hear that man hit me up I'm in sandy, Cereal5, Jul-18-04 10:00 PM, #19

RE: Sorry to Hear that man hit me up I'm in sandy, Mattchew, Jul-19-04 05:07 AM, #20

RE: Sorry to Hear that man hit me up I'm in sandy, siueclipse, Jul-19-04 05:53 AM, #21

RE: Sorry to Hear that man hit me up I'm in sandy, Mattchew, Jul-19-04 06:15 AM, #22

RE: Sorry to Hear that man hit me up I'm in sandy, siueclipse, Jul-19-04 06:17 AM, #23

RE: Sorry to Hear that man hit me up I'm in sandy, Mattchew, Jul-19-04 06:31 AM, #24

RE: Sorry to Hear that man hit me up I'm in sandy, siueclipse, Jul-19-04 07:25 AM, #25

RE: Sorry to Hear that man hit me up I'm in sandy, Mattchew, Jul-19-04 07:32 AM, #26

RE: The End Has Come., Mattchew, Jul-19-04 06:46 AM, #27

RE: The End Has Come., DarKReaLity, Jul-19-04 07:52 AM, #28

RE: The End Has Come., Administrator

Administrator

Star Turbo Talon, Jul-19-04 03:20 PM, #29

RE: The End Has Come., Mattchew, Jul-19-04 05:14 PM, #30

RE: The End Has Come., solareclipse98, Jul-24-04 10:34 AM, #31

RE: The End Has Come., Steve, Jul-24-04 02:12 PM, #32

RE: The End Has Come., solareclipse98, Jul-24-04 03:34 PM, #33

RE: The End Has Come., Administrator

Administrator

Star Turbo Talon, Jul-24-04 05:55 PM, #34

eclipse982nrRST	Jul-17-04 11:05 AM
Member since Mar 16th 2004 6314 posts,

#74051, "RE: The End Has Come."
In response to Reply # 0

sorry to hear about your ride man ... anyhow i would land on the 300zx! but hey, how much you want for the venom manny and will it work with an egr and pcv and drilled for map sensor? also, what size of injectors where you running cuz i need some of them too!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HadesOmega	Jul-17-04 11:55 AM
Old School 2GNTer 4529 posts,

#74055, "RE: The End Has Come."
In response to Reply # 1

damn sad to hear, 3 times thats horrible luck. Good luck witht the 300ZX or the Supra. I'll tell you this there's not as much space in those cars as the eclipse, so if your a big guy I'd look elsewhere.

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

djtrickee	Jul-17-04 12:18 PM
Donating 2GNT member 5924 posts,

#74057, "RE: The End Has Come."
In response to Reply # 2

Noooooooooooo... cant be true. if it is, then sell me your stuff.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Jul-17-04 12:35 PM
Member since Jul 22nd 2002 1120 posts,

#74059, "RE: The End Has Come."
In response to Reply # 0

Originally posted by solareclipse98
Dear Fellow Turbo 2GNT' People. It breaks my heart to tell you that last night on the track Solar blew it's third engine. I take all the blame for not having it properly tuned before running it. The Dyno's in this town where all booked up. I ran once and missed a gear and still ran a 15second qtr mile missing a gear going from 3rd to 5th. On my second run i ran a 15second qtr mile even blowing my engine half way down the track. I have decided to part solar out. It used to be fun to work on this car now it's just frustrating and I'm tired of trying to make this work... I haven't had very much support lately on this board so i'm worried that if i went for the 4th engine I would really be on my own. If anyone is interested I have a lot to offer on this car... from electronics to axles to slicks and what not. I do have a vennom manifold and that is going to collente. The block is still good and so is the head, It's obvious i just blew my ringlands.. I have no compresssion at all the bitch won't even start.. I'm even going to get rid of the bodykit so if any of you are interested let me know I will give you a good deal.. Financial reasons aren't why i'm not rebuilding... It's the frustration and the stress of this car that I think it's time to part with it. I just want to get rid of the car so I'm easy going on prices... I think i'm going to venture into the land of the Toyota Supra or 300Zx.... My heart wants to me to keep my 2gnt but i just don't think i have the motivation to persue it any further. I will stop by from time to time to see how all of you are doing and plan on being here for awhile at least until this thing is parted out.

What happened?
How much boost were you running? And what fuel system and turbo???

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nick5102	Jul-17-04 01:35 PM
Member since Jan 25th 2004 119 posts,

#74060, "Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 4

I want to come check out your car Especially if your parting it out, I'm from sandy so its not to far from you. I saw your first run last night... but then we where on the other side all night at the car show. but please give me a call at
(801)953-9744,
posted this message at 4:30 on saturday feel free to call any time tonight.
Thanks Nick.

I also might be able to help you if you still want to keep it.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jul-17-04 02:13 PM
Member since Nov 28th 2002 3504 posts,

#74061, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 5

that sucks to hear man, but honestly, im not surprised.

James

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

KTECLIPSE	Jul-17-04 04:08 PM
Donating 2GNT member 537 posts,

#74062, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 6

I may be interested in the axles. Post up some information about them and how much you are looking to get.

Thanks,
Kurt

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

grain	Jul-17-04 04:56 PM
Donating 2GNT member 2551 posts,

#74063, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 7

what axles, i need axles

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Jul-17-04 06:17 PM
Member since May 20th 2003 6329 posts,

#74064, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 8

sorry to hear man, but yeah, your other post that said you ran 15 psi on stock injectors with a too small disk in the SFMU pretty much says what happened. Thats officially when you cracked a ring land, and just damaged it more by continuing to boost it..You got to be very careful boosting these motors when stock, and esp when you run the stock injectors..

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

techboy	Jul-17-04 07:20 PM
Member since May 20th 2002 1662 posts,

#74066, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 9

Agreed, that's a shame. I want the dumbest thing if you are really going to part it out. If it's an RS, which it looks like it is, the throttle cable. I can't stand all my cruise control crap in the way anymore. When your ready to part, I'll e/m you.

1999 Eclipse GST 4G63

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

solareclipse98	Jul-17-04 07:17 PM
Member since Jul 07th 2003 385 posts,

#74065, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 6
Jul-17-04 07:19 PM by solareclipse98

Originally posted by siueclipse
that sucks to hear man, but honestly, im not surprised. James

You know, your one of the main fucking reasons why I don't want to rebuild this motor because there are ass holes like you that have an ego problems that think they are the shit. Yes I made a few mistakes but I learn from them and thats how and why chose to do what I did. At least i'm man enough to admit i made a mistake, unlike some people i know that probably NEVER makes mistakes.

If any of you want to purchase any of my stuff send me an e-mail at pgranere@streamline-hosting.com I'm done dealing with inconsiderate pricks.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jul-18-04 09:04 AM
Member since Nov 28th 2002 3504 posts,

#74074, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 11

Originally posted by solareclipse98

Originally posted by siueclipse that sucks to hear man, but honestly, im not surprised. James

You know, your one of the main fucking reasons why I don't want to rebuild this motor because there are ass holes like you that have an ego problems that think they are the shit. Yes I made a few mistakes but I learn from them and thats how and why chose to do what I did. At least i'm man enough to admit i made a mistake, unlike some people i know that probably NEVER makes mistakes.

oh cry me a fuckin river. your builds were scrwed from the beginning simly because you haven't taken the time to learn what you are doing and youve been in too much of a rush..

i dont have an ego problem at all, i help plenty of people on here, on the phone and over aim.

ive seen the posts you make and the questions you ask... have you ever taken someone's advice from this place? cause it seems like you don't listen to what people say...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jul-18-04 03:29 PM
Member since Oct 23rd 2003 340 posts,

#74076, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 12

Originally posted by siueclipse

Originally posted by solareclipse98

Originally posted by siueclipse that sucks to hear man, but honestly, im not surprised. James

You know, your one of the main fucking reasons why I don't want to rebuild this motor because there are ass holes like you that have an ego problems that think they are the shit. Yes I made a few mistakes but I learn from them and thats how and why chose to do what I did. At least i'm man enough to admit i made a mistake, unlike some people i know that probably NEVER makes mistakes.

oh cry me a fuckin river. your builds were scrwed from the beginning simly because you haven't taken the time to learn what you are doing and youve been in too much of a rush.. i dont have an ego problem at all, i help plenty of people on here, on the phone and over aim. ive seen the posts you make and the questions you ask... have you ever taken someone's advice from this place? cause it seems like you don't listen to what people say...

Man way to kick a guy when he is down. He made a mistake and he is admitting to it. You should be a little more contructive instead of an ass about it. I recall you posting some pretty stupid mistakes of your own on dsmtuners and noone busting your balls the way you are this guys.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jul-18-04 03:59 PM
Member since Nov 28th 2002 3504 posts,

#74077, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 13

Originally posted by Mattchew

Originally posted by siueclipse

Originally posted by solareclipse98

Originally posted by siueclipse that sucks to hear man, but honestly, im not surprised. James

You know, your one of the main fucking reasons why I don't want to rebuild this motor because there are ass holes like you that have an ego problems that think they are the shit. Yes I made a few mistakes but I learn from them and thats how and why chose to do what I did. At least i'm man enough to admit i made a mistake, unlike some people i know that probably NEVER makes mistakes.

oh cry me a fuckin river. your builds were scrwed from the beginning simly because you haven't taken the time to learn what you are doing and youve been in too much of a rush.. i dont have an ego problem at all, i help plenty of people on here, on the phone and over aim. ive seen the posts you make and the questions you ask... have you ever taken someone's advice from this place? cause it seems like you don't listen to what people say...

Man way to kick a guy when he is down. He made a mistake and he is admitting to it. You should be a little more contructive instead of an ass about it. I recall you posting some pretty stupid mistakes of your own on dsmtuners and noone busting your balls the way you are this guys.

hey you know what man, you can go back into the wood work with you worthless .02

ive talked with many people on this board that feel the exact same way about what i said.. im just the one with nerve to say it. so deal with it.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jul-18-04 04:27 PM
Member since Oct 23rd 2003 340 posts,

#74078, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 14

Originally posted by siueclipse

Originally posted by Mattchew

Originally posted by siueclipse

Originally posted by solareclipse98

Originally posted by siueclipse that sucks to hear man, but honestly, im not surprised. James

You know, your one of the main fucking reasons why I don't want to rebuild this motor because there are ass holes like you that have an ego problems that think they are the shit. Yes I made a few mistakes but I learn from them and thats how and why chose to do what I did. At least i'm man enough to admit i made a mistake, unlike some people i know that probably NEVER makes mistakes.

oh cry me a fuckin river. your builds were scrwed from the beginning simly because you haven't taken the time to learn what you are doing and youve been in too much of a rush.. i dont have an ego problem at all, i help plenty of people on here, on the phone and over aim. ive seen the posts you make and the questions you ask... have you ever taken someone's advice from this place? cause it seems like you don't listen to what people say...

Man way to kick a guy when he is down. He made a mistake and he is admitting to it. You should be a little more contructive instead of an ass about it. I recall you posting some pretty stupid mistakes of your own on dsmtuners and noone busting your balls the way you are this guys.

hey you know what man, you can go back into the wood work with you worthless .02 ive talked with many people on this board that feel the exact same way about what i said.. im just the one with nerve to say it. so deal with it.

What makes your 2 cents worth more than mine? Because you turn into an e-thug when you see someone down or is it the fact that you claim to run these amazing hp numbers that you have yet to show anyone proof of? It would seem that you are all talk.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jul-18-04 04:43 PM
Member since Nov 28th 2002 3504 posts,

#74079, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 15

alright.. good. thanx for playing. enjoy your .02

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jul-18-04 04:58 PM
Member since Oct 23rd 2003 340 posts,

#74080, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 16

Originally posted by siueclipse
alright.. good. thanx for playing. enjoy your .02

Your welcome emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

xEclipsE RaceRx	Jul-18-04 07:48 PM
Member since Jan 09th 2002 2982 posts,

#74086, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 17

Sorry bro, I am in the same boat with you, my heart doesnt want to get rid of it, but this constant building just isnt for me at this time with college and stuff. Im getting rid of my 2g as well

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Cereal5	Jul-18-04 10:00 PM
Donating 2GNT member 1016 posts,

#74087, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 15

Originally posted by Mattchew

Originally posted by siueclipse

Originally posted by Mattchew

Originally posted by siueclipse

Originally posted by solareclipse98

Originally posted by siueclipse that sucks to hear man, but honestly, im not surprised. James

You know, your one of the main fucking reasons why I don't want to rebuild this motor because there are ass holes like you that have an ego problems that think they are the shit. Yes I made a few mistakes but I learn from them and thats how and why chose to do what I did. At least i'm man enough to admit i made a mistake, unlike some people i know that probably NEVER makes mistakes.

oh cry me a fuckin river. your builds were scrwed from the beginning simly because you haven't taken the time to learn what you are doing and youve been in too much of a rush.. i dont have an ego problem at all, i help plenty of people on here, on the phone and over aim. ive seen the posts you make and the questions you ask... have you ever taken someone's advice from this place? cause it seems like you don't listen to what people say...

Man way to kick a guy when he is down. He made a mistake and he is admitting to it. You should be a little more contructive instead of an ass about it. I recall you posting some pretty stupid mistakes of your own on dsmtuners and noone busting your balls the way you are this guys.

hey you know what man, you can go back into the wood work with you worthless .02 ive talked with many people on this board that feel the exact same way about what i said.. im just the one with nerve to say it. so deal with it.

What makes your 2 cents worth more than mine? Because you turn into an e-thug when you see someone down or is it the fact that you claim to run these amazing hp numbers that you have yet to show anyone proof of? It would seem that you are all talk.

Hmm from what i've seen at the IL meets, I'd be willing to bet he's all he claims he is. And while he was a bit... cold, I'd probably agree with what was said.

Anyway, I'm interested in the entire head setup. Email me if you want to work out details

amiller99rs: seriously, chicks suck sometimes
amiller99rs: like if a girl walked by and said "Hey, nice cock" and just kept going you'd smile all day about that

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jul-19-04 05:07 AM
Member since Oct 23rd 2003 340 posts,

#74090, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 19

Originally posted by Cereal5

Originally posted by Mattchew

Originally posted by siueclipse

Originally posted by Mattchew

Originally posted by siueclipse

Originally posted by solareclipse98

Originally posted by siueclipse that sucks to hear man, but honestly, im not surprised. James

You know, your one of the main fucking reasons why I don't want to rebuild this motor because there are ass holes like you that have an ego problems that think they are the shit. Yes I made a few mistakes but I learn from them and thats how and why chose to do what I did. At least i'm man enough to admit i made a mistake, unlike some people i know that probably NEVER makes mistakes.

oh cry me a fuckin river. your builds were scrwed from the beginning simly because you haven't taken the time to learn what you are doing and youve been in too much of a rush.. i dont have an ego problem at all, i help plenty of people on here, on the phone and over aim. ive seen the posts you make and the questions you ask... have you ever taken someone's advice from this place? cause it seems like you don't listen to what people say...

Man way to kick a guy when he is down. He made a mistake and he is admitting to it. You should be a little more contructive instead of an ass about it. I recall you posting some pretty stupid mistakes of your own on dsmtuners and noone busting your balls the way you are this guys.

hey you know what man, you can go back into the wood work with you worthless .02 ive talked with many people on this board that feel the exact same way about what i said.. im just the one with nerve to say it. so deal with it.

What makes your 2 cents worth more than mine? Because you turn into an e-thug when you see someone down or is it the fact that you claim to run these amazing hp numbers that you have yet to show anyone proof of? It would seem that you are all talk.

Hmm from what i've seen at the IL meets, I'd be willing to bet he's all he claims he is. And while he was a bit... cold, I'd probably agree with what was said. Anyway, I'm interested in the entire head setup. Email me if you want to work out details

Yeah, but I don't think a dyno sheet or even a timeslip is asking to much do you?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jul-19-04 05:53 AM
Member since Nov 28th 2002 3504 posts,

#74092, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 20

matthewc... you really don't have a life do you?

why don't you stop whoring on someone's post.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jul-19-04 06:15 AM
Member since Oct 23rd 2003 340 posts,

#74093, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 21

Originally posted by siueclipse
matthewc... you really don't have a life do you? why don't you stop whoring on someone's post.

I'm not whoring the thread, I was taking up for the guy and you got all defensive. There is no need for you to get defensive siueclipse if you have a dyno sheet to post up then post it. Otherwise quit being a jerk to this guy who clearly admitted it was his fault. I think you just like kicking people when they are down to make you feel better about yourself.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jul-19-04 06:17 AM
Member since Nov 28th 2002 3504 posts,

#74094, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 22

Originally posted by Mattchew

Originally posted by siueclipse matthewc... you really don't have a life do you? why don't you stop whoring on someone's post.

I'm not whoring the thread, I was taking up for the guy and you got all defensive. There is no need for you to get defensive siueclipse if you have a dyno sheet to post up then post it. Otherwise quit being a jerk to this guy who clearly admitted it was his fault. I think you just like kicking people when they are down to make you feel better about yourself.

still continuing this? let it go man. everything will be ok...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jul-19-04 06:31 AM
Member since Oct 23rd 2003 340 posts,

#74095, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 23

Originally posted by siueclipse

Originally posted by Mattchew

Originally posted by siueclipse matthewc... you really don't have a life do you? why don't you stop whoring on someone's post.

I'm not whoring the thread, I was taking up for the guy and you got all defensive. There is no need for you to get defensive siueclipse if you have a dyno sheet to post up then post it. Otherwise quit being a jerk to this guy who clearly admitted it was his fault. I think you just like kicking people when they are down to make you feel better about yourself.

still continuing this? let it go man. everything will be ok...

Way to avoid the question. What are you afraid of? If you have the dyno sheet then posting it should not be an issue.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jul-19-04 07:25 AM
Member since Nov 28th 2002 3504 posts,

#74097, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 24

Originally posted by Mattchew

Originally posted by siueclipse

Originally posted by Mattchew

Originally posted by siueclipse matthewc... you really don't have a life do you? why don't you stop whoring on someone's post.

I'm not whoring the thread, I was taking up for the guy and you got all defensive. There is no need for you to get defensive siueclipse if you have a dyno sheet to post up then post it. Otherwise quit being a jerk to this guy who clearly admitted it was his fault. I think you just like kicking people when they are down to make you feel better about yourself.

still continuing this? let it go man. everything will be ok...

Way to avoid the question. What are you afraid of? If you have the dyno sheet then posting it should not be an issue.

why dont you move this to the thread i started about my numbers.. that way you aren't being an ass in this one. if you want to doubt my numbers.. thats fine. just remember you are the only 1 person out of all the others on this board.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jul-19-04 07:32 AM
Member since Oct 23rd 2003 340 posts,

#74098, "RE: Sorry to Hear that man hit me up I'm in sandy"
In response to Reply # 25

Originally posted by siueclipse

Originally posted by Mattchew

Originally posted by siueclipse

Originally posted by Mattchew

Originally posted by siueclipse matthewc... you really don't have a life do you? why don't you stop whoring on someone's post.

I'm not whoring the thread, I was taking up for the guy and you got all defensive. There is no need for you to get defensive siueclipse if you have a dyno sheet to post up then post it. Otherwise quit being a jerk to this guy who clearly admitted it was his fault. I think you just like kicking people when they are down to make you feel better about yourself.

still continuing this? let it go man. everything will be ok...

Way to avoid the question. What are you afraid of? If you have the dyno sheet then posting it should not be an issue.

why dont you move this to the thread i started about my numbers.. that way you aren't being an ass in this one. if you want to doubt my numbers.. thats fine. just remember you are the only 1 person out of all the others on this board.

I'm not the only one who questions it, I'm just the only one who has the guts to say it. Would posting this in your other thread get you to post up the dyno sheet?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jul-19-04 06:46 AM
Member since Oct 23rd 2003 340 posts,

#74096, "RE: The End Has Come."
In response to Reply # 0

Just to let you know man that sucks. I hate to see you leave us but obviously you have made your choice. Hopefully you can learn from this experience and take the knowlege you gained and apply it to any future projects you take on. R.I.P. one very nice DSM. Good luck with your next car.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DarKReaLity	Jul-19-04 07:52 AM
Donating 2GNT member 934 posts,

#74099, "RE: The End Has Come."
In response to Reply # 27

damn man, sucks that had to happen to you. that's what happens when you rush things and not being prepared for it. your car has potential to be a fast car, but you're missing the minor details on boosting NA cars especially when dealing with air/fuel mixtures. it should be easier to upgrade factory turbo cars, but you still might go through same problems whether if it's a supra or 300zx. it's best that the knowledge you learned on your 3rd engine makes you realize to do things properly the 1st time. you can get an EVO brand spank'n new from the factory for example, put all the upgrades you want, but all it takes is too lean or too rich fuel mixture, preignition,misfires, too much timing advance and say goodbye pistons once again. all the money you spent on your ride, you should at least dyno tune it just in case before going to any big racing event just to be in the safe side. well goodluck on your next ride...if you need any advice feel we're still here for ya. keep solar alive!!!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Star Turbo Talon	Jul-19-04 03:20 PM
Member since Oct 21st 2003 8331 posts,

#74114, "RE: The End Has Come."
In response to Reply # 28

not to add to the drama here but i think James was insulted by this comment:

(I have decided to part solar out. It used to be fun to work on this car now it's just frustrating and I'm tired of trying to make this work... I haven't had very much support lately on this board so i'm worried that if i went for the 4th engine I would really be on my own.)

I have ready many of Solars questions and they are good ones but he failed to realize the support he was getting. That is kind of a kick in the teeth.

At any rate god luck to ya....my advise is get a factory turbo'ed car....doesnt seem like you want the constant tuning. Not saying thats a bad thing either.

Terry

96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges

97 Eclipse
Greddy header - Apexi N1 3" exhaust - SFMU/return line - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: Apexi AFC, HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

Mitchell on Demand copies available

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jul-19-04 05:14 PM
Member since Oct 23rd 2003 340 posts,

#74120, "RE: The End Has Come."
In response to Reply # 29

Originally posted by Star Turbo Talon
not to add to the drama here but i think James was insulted by this comment: (I have decided to part solar out. It used to be fun to work on this car now it's just frustrating and I'm tired of trying to make this work... I haven't had very much support lately on this board so i'm worried that if i went for the 4th engine I would really be on my own.) I have ready many of Solars questions and they are good ones but he failed to realize the support he was getting. That is kind of a kick in the teeth. At any rate god luck to ya....my advise is get a factory turbo'ed car....doesnt seem like you want the constant tuning. Not saying thats a bad thing either. Terry 96 Eagle talon ESI Star Stage II - Boost/oil/EGT gauges 97 Eclipse Greddy header - Apexi N1 3" exhaust - SFMU/return line - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks Waiting to be installed: Apexi AFC, HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors) Mitchell on Demand copies available

I can see that, but with wisdom comes modesty and kicking a guy when he is down just so you can have the "I told you so" is not modest or wise.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

solareclipse98	Jul-24-04 10:34 AM
Member since Jul 07th 2003 385 posts,

#74306, "RE: The End Has Come."
In response to Reply # 30
Jul-24-04 10:34 AM by solareclipse98

Originally posted by Mattchew

Originally posted by Star Turbo Talon not to add to the drama here but i think James was insulted by this comment: (I have decided to part solar out. It used to be fun to work on this car now it's just frustrating and I'm tired of trying to make this work... I haven't had very much support lately on this board so i'm worried that if i went for the 4th engine I would really be on my own.) I have ready many of Solars questions and they are good ones but he failed to realize the support he was getting. That is kind of a kick in the teeth. At any rate god luck to ya....my advise is get a factory turbo'ed car....doesnt seem like you want the constant tuning. Not saying thats a bad thing either. Terry 96 Eagle talon ESI Star Stage II - Boost/oil/EGT gauges 97 Eclipse Greddy header - Apexi N1 3" exhaust - SFMU/return line - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks Waiting to be installed: Apexi AFC, HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors) Mitchell on Demand copies available

I can see that, but with wisdom comes modesty and kicking a guy when he is down just so you can have the "I told you so" is not modest or wise.

Well.. It was funny after my last post I was contacted by someone who claims to know James... They said that they know the owner of the performance shop where he went to dyno and they said that he can barely reach 300whp if he is lucky. They also said they saw him run the 1/4 mile and he ran a 14second 1/4... So I tend to believe this other person until I see proof he is all talk. I was "Man" enough to admit my mistakes and trust me I learned... I will always love my 2gnt and I look forward to seeing Collente make my stuff work on his ride as he bought the turbo,downpipe, bov, wg, manifold and a few other things... I'm sure his will do very well...

Formally Project Solar Eclipse
Now Entering 300ZX Land.

Jim Wolf ECU w/ Boost Jets
Jim Wolf Pop Charger Intake
Eibach Pro-Kit Lowering Springs w/ Fully Adjustable Gas Shocks
B&B Exhaust - 3" w/ Dual 4.5 Oval Tips w/ 3" Test Pipes
Konig Five-O 17X8 Rims w/ Polished Lip
Blitz Turbo Timer /w Boost Gauge
Freshly Painted Calipers
Stillen Unorthodox Pulley
Stillen Front Nose / Bumper
Stillen Short Shifter
New RPS Clutch / Pressure Plate / Flywheel - Holds 550 ft lbs of Torque
New Fully-Built 5-Speed Transmission
New Howe Radiator w/ 18" Electric Fan w/ Auto Thermostat Controller
New Yokohama ES100 Tires All Around
New Tension Rods
New Fuel Injectors
New Spark Plugs
New Motor Mounts
New Vacuum Hoses
New Heater Core
New Fuel Filter
New Ignition Control Module
New Hicas (4-Wheel Steering) Lines
New Brake Pads / Brake Lines / Master Cylinder

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Steve	Jul-24-04 02:12 PM
Member since Sep 15th 2003 1542 posts,

#74312, "RE: The End Has Come."
In response to Reply # 31
Jul-24-04 02:12 PM by Steve

Holy shit thats a nice zx..I want one so bad but money is an issue with us jobless 18 yr old's...

Edit: Good luck with this man. Take your time and do it right from the get go.

Steve-o
Top secret.

Originally posted by FlyinEsi
I guess I'll just have to live with a 500+ hp AWD 4-banger. emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

solareclipse98	Jul-24-04 03:34 PM
Member since Jul 07th 2003 385 posts,

#74318, "RE: The End Has Come."
In response to Reply # 32

Originally posted by Steve
Holy shit thats a nice zx..I want one so bad but money is an issue with us jobless 18 yr old's... Edit: Good luck with this man. Take your time and do it right from the get go.

Thank you... Yeah i do not plan on modding this too much... Going to learn about them first... I learned quite a bit from the eclipse but this is a different car so I'm going to take my time...

Formally Project Solar Eclipse
Now Entering 300ZX Land.

Jim Wolf ECU w/ Boost Jets
Jim Wolf Pop Charger Intake
Eibach Pro-Kit Lowering Springs w/ Fully Adjustable Gas Shocks
B&B Exhaust - 3" w/ Dual 4.5 Oval Tips w/ 3" Test Pipes
Konig Five-O 17X8 Rims w/ Polished Lip
Blitz Turbo Timer /w Boost Gauge
Freshly Painted Calipers
Stillen Unorthodox Pulley
Stillen Front Nose / Bumper
Stillen Short Shifter
New RPS Clutch / Pressure Plate / Flywheel - Holds 550 ft lbs of Torque
New Fully-Built 5-Speed Transmission
New Howe Radiator w/ 18" Electric Fan w/ Auto Thermostat Controller
New Yokohama ES100 Tires All Around
New Tension Rods
New Fuel Injectors
New Spark Plugs
New Motor Mounts
New Vacuum Hoses
New Heater Core
New Fuel Filter
New Ignition Control Module
New Hicas (4-Wheel Steering) Lines
New Brake Pads / Brake Lines / Master Cylinder

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Star Turbo Talon	Jul-24-04 05:55 PM
Member since Oct 21st 2003 8331 posts,

#74325, "RE: The End Has Come."
In response to Reply # 33

the only thingi can say is damn nice 300. you will learn one thig and that you need a bigger wallet if you plan to daily drive that beast..lol I have seriously looked into a 300 as well as the rx-7 and the mainenance is what i refuse to deal with. everything is extremely expensive and i am talking parts only since i do the work myself. Have fun though, get hard pipes from stillen they look sweet

Terry

96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges

97 Eclipse
Greddy header - Apexi N1 3" exhaust - SFMU/return line - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: Apexi AFC, HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

Mitchell on Demand copies available

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

Turbo/Nitrous Tech

topic #74050

Previous topic | Next topic

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com

Generated in 0.074 seconds, executing 82 queries.