#7401, "where are you guys mounting your catch cans??!?"
Im having some problems finding a place to mount it that will also sort of "show it off" its the nice looking greddy one, also where are you mounting your msd's and tach adaptors at? any1 have pics? thanks alot
#7402, "RE: where are you guys mounting your catch cans??!?" In response to Reply # 0
LAST EDITED ON 14-Jul-01 AT 07:50 AM (PST)
My MSD, Boost Retard module and Tach adapter are mounted on the passenger floor board where the floor mat used to be (when it had interior) as for the mounting of the catch can I put mine where the cruise control bracket is on the GS's (passenger side fire wall). I have some pics if you would like to see, but e-mail me cause I dont have time to post them.
Here is what I have have. JE 8:8.1 with rings boared .20 over Seinze custom rods (600+hp) Knife edged and shaved crank Clevite bearings Shaved oil pump to bump up oil preasure Stage 3 ported and pollished head twin Accel coil packs PT lashers ov
#7405, "RE: Damn Rage!! Email the pics to me and I will post them up for you" In response to Reply # 3
lol, you guy's are killing me. I will tell you what I will do. I will develope some close ups on the catch can and MSD stuff, but thats it. I have to keep some stuff a mystery until I unvaile the True "PuRe RaGe" machine (hopefuly at Nopi this sept). I want you guy's to know that the project is not completed, it is in the making. So there realy is not much to show but receipts and boxes right now. Roll cage due to be put in this month by then all my parts will have gotten here and a non stop assembly of the car will be in affect. Be patient my brothers, "some head are gonna roll" come next season for sure.
Here is what I have have. JE 8:8.1 with rings boared .20 over Seinze custom rods (600+hp) Knife edged and shaved crank Clevite bearings Shaved oil pump to bump up oil preasure Stage 3 ported and pollished head twin Accel coil packs PT lashers ov
#7407, "RE: aren't you in Florida? I will have to find out where you are gonna be at NOPI, I am making the ..." In response to Reply # 5
I put my catchcan right in front of the battery wedged between the ECU and the upper intercooler pipe. Best place for it if its going to reach both the valve cover and the air filter.
#7410, "RE: where are you guys mounting your catch cans??!?" In response to Reply # 8
I am useing a Summit racing one as well (big red one). As for what it is used for, well it takes any blow by (oil from valve cover breather) and keeps it in a separate tank so it does not mess your turbo up or your intake.
Here is what I have have. JE 8:8.1 with rings boared .20 over Seinze custom rods (600+hp) Knife edged and shaved crank Clevite bearings Shaved oil pump to bump up oil preasure Stage 3 ported and pollished head twin Accel coil packs PT lashers ov
#7411, "RE: where are you guys mounting your catch cans??!?" In response to Reply # 9
LAST EDITED ON 15-Jul-01 AT 10:27 PM (PST)
I bought the one from RRE for 49 dollars. Its not huge, but it certainly catches all the oil that comes out of a healthy turbo 420a engine. (barely any at all). I get pictures back from developing tomorrow...I'll post them as soon as I get them.
Just thought about it...hell you'll be able to see it in person in 4 days
#7412, "RE: where are you guys mounting your catch cans??!?" In response to Reply # 10
Did I miss somthing? How will I see it in person in 4 days? I live in Florida, but dont or cant seem to remember if we have ever met. Are you coming down to South florida with another board member? if so then I know who you are and you will get gere. if not shoot me an e-mail so I can make sure we hook up if we are supposed to.
Here is what I have have. JE 8:8.1 with rings boared .20 over Seinze custom rods (600+hp) Knife edged and shaved crank Clevite bearings Shaved oil pump to bump up oil preasure Stage 3 ported and pollished head twin Accel coil packs PT lashers ov
#7414, "RE: where are you guys mounting your catch cans??!?" In response to Reply # 12
LAST EDITED ON 17-Jul-01 AT 08:07 AM (PST)
lol Thats cool, but the shoot out has been cancled (for me) due to unforseen sircumstances. I will be there in spirit to root you guy's on. But I have a long road to travel to get my project ready for next season and very little time to do it in. Good luck man. P.S nice FMIC!!!
Here is what I have have. JE 8:8.1 with rings boared .20 over Seinze custom rods (600+hp) Knife edged and shaved crank Clevite bearings Shaved oil pump to bump up oil preasure Stage 3 ported and pollished head twin Accel coil packs PT lashers ov
#7415, "RE: where are you guys mounting your catch cans??!?" In response to Reply # 10
i'm still looking for a nice small catch-can. ...maybe something about the size of a soda-can. anybody know where to find one? if i can't find one i'll have to try and make one, but i'd rather buy it if it's available.
#7418, "RE: where are you guys mounting your catch cans??!?" In response to Reply # 16
Well here's where I put mine. Mine is a pretty big one, they said that this one is for cars and that small one is for motorcycles. The only time oil comes out of mine though is when I autocross, I've noticed that. I just used a bunch of tie wraps to secure it to the ECU bracket. I'm sure the fact that I don't have a collosal ECU helps also.
O heard a good junkyard mod is to use a brakefluid bottle, then like poke holes on the top of it or attack a breather filter. I'll probably do that for my PCV hose later on.
Oh yeah mine is a JAZ catchcan that I bought at Frey Racing for like 40 bucks.
95 Mitsu Eclipse RS AFX Pulley | B&M Super Oil Cooler | Performance Muffler | HKS Air Filter | KYB AGX Shox | Skunk2 Coilovers | FU, RU, RL, and RRE FL Tie/Strut Bars | RS to TSi Rear Disc Mod | RS to TSi upgraded F&R Sway Bar | 97' Spyder Eclipse 5 Spoke Wheels | HKS TYPE 1 Turbo Timer | Star Stage 1 T3/T04E BB Turbo Kit | Schroth Autocontrol 3-Point Harness | and 1 HiGhLy SkIlLeD DrIvEr! |
http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr Who sez FF can't drift?
#7419, "RE: where are you guys mounting your catch cans??!?" In response to Reply # 17
That catch can will fit perfectly behind the engine block bolted to the firewall. It has to sit on a 45 degree angle. Had to do this to a friend of mine's avenger with stage 2 hrc kit. With the FMIC piping, there is no space anywhwere else. You can stil reach with your arm the toggle switch to drain the catch can. We just ran a small 1/4" hose from the drain fitting all the way to the bottom of the car. Works nice.
I'll post some pics when i can find them..
_________________ Vinnie Lima vlima@csc.com AIM: Kiku888 1997 Chrysler Sebring "Silver XTC" I4 420a w/ HRC Stage 2.45 w/ FMIC 14.7@97 mph@6psi Proud member of the ASOG BoOsT JuNkIe Crew
Search
Printer-friendly copy
3 Users in Chat
