i have a 97 eclipse gs that i just got and i want to turbo it the kits are way to exspensive so im buying the parts separate so far i have

14b turbo
1g bov
2g gsx exhaust manifold
oil cooler
2g gsx fuel pump and rewire kit
2g gsx stock intercooler
all the water oil return lines

for a down pipe could i use the stock gst would i just have to modify the holes or do i have to go to an exhaust shop and get it custom made and for the exhaust manifold can i cut off the flange from my non turbo manifold then cut off all the mounting holes for the turbo manifold then put the non turbo flange over the turbo flange and weld it together

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=73146&mesg_id=73146&page=

go read this

Alain

one of the 2.4 true pionners

you have a lot to learn imo.

www.gregsorrells.com

http://ubanimator.com>

Corky Bell "Maximum Boost"!

Get it, read it, learn it, love it, LIVE IT!!!!!!

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

hey alain
so what do i do for a manifold then get a 1g or custom made

one of the 2.4 true pionners

Could you use the stock gsx or gs-t fuel pump for the t-25 or 14b?

if you're really serious about the 14b setup then look at this setup.
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=71237&mesg_id=71237&listing_type=search

however i think you need to read a whole lot more about the turbo thing before you go any further. not to be a dick but if you're thinking you can throw a 2g turbo exhaust manifold on a 2gnt, then that's a dead give away that you need to do lots more learning.