hey guys I've been doind a search and answered a few of my questions already, but I'm left with wondering what I should do with my fuel system. I am using a edelbrock wet kit, and with the 95 fuel rail I am slightly confused. if need be I can run a second fuel line and an inline pump but if there is an easier way I'd like to see the options out there. thanks
#72021, "RE: nitrous help on 95" In response to Reply # 0
Get fuel from the test port on the fuel rail.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#72053, "RE: nitrous help on 95" In response to Reply # 2
eclipse_99rs comes through again. So from that thread if I understand it right I can take from the port on the passangers side of the fuel rail. Now the question is would it be safer to just run a seond fuel line with its own pump or should I at least get a second pump in line? any ideas?
#72054, "RE: nitrous help on 95" In response to Reply # 3
no need to upgrade your pump or add another one. as long as your running under a 100 shot or so your stocker should flow fine. you can also tap into your fuel line with the supplied T and fitting.
#72061, "RE: nitrous help on 95" In response to Reply # 4
sweet thank man. So is it best to tap before the fpr and add a line or should i run from the test port? I just want to ensure that I am not going to run lean and smoke the engine.
#72062, "RE: nitrous help on 95" In response to Reply # 5
Just use the fuel rail, You will need a schrader valve remover tool they are like 2dollars at walmart or any autoparts store. The fitting on your n2o fuel line will thread on with no problems.