#70667, "RE: Pics of 3" Downpipe for Star Kit..." In response to Reply # 0
Nice Why recirculate though?
-------jezreel 1998 GS with hrc stage 2, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dr. uber groundwires, dynotune fp gauge. gst muff, turbo spoiler Boostin since Aug 03.
nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!! thanks for www.kaptainmyke.com for the sig hosting
#70669, "RE: Pics of 3" Downpipe for Star Kit..." In response to Reply # 1
Originally posted by jsupetran Nice Why recirculate though? -------jezreel 1998 GS with hrc stage 2, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dr. uber groundwires, dynotune fp gauge. gst muff, turbo spoiler Boostin since Aug 03. nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!! thanks for www.kaptainmyke.com for the sig hosting
keeps it very quiet, less attention from police. No whooshing sound just a loud fluttering then nothing, kind of cool
I've had it on for like three weeks... I'm bored with it now!
#70680, "RE: Pics of 3" Downpipe for Star Kit..." In response to Reply # 2 May-09-04 01:05 PM by HadesOmega
nice mine is mostly 3 inches. recirculation is a waste of time and money is what I found out, it is quiet I guess but it just sounds so badass open. Do ya got a picture of the recirculated part?
how much did it cost to get that done?
here's mine its gone through a few revisions since this pictures though. Did you make a long dump tube or a small one?
I hate how it comes so close to the oil pan though =/ wow you even went through all the trouble of recirculating your BOV. interesting. That means your car is enviromentally friendly and should supposedly pass smog, but if a smog shop sees that in california they'll just nod and walk away.
http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr Who sez FF can't drift?
#70724, "RE: Pics of 3" Downpipe for Star Kit..." In response to Reply # 3
Originally posted by HadesOmega nice mine is mostly 3 inches. recirculation is a waste of time and money is what I found out, it is quiet I guess but it just sounds so badass open. Do ya got a picture of the recirculated part? how much did it cost to get that done? here's mine its gone through a few revisions since this pictures though. Did you make a long dump tube or a small one? I hate how it comes so close to the oil pan though =/ wow you even went through all the trouble of recirculating your BOV. interesting. That means your car is enviromentally friendly and should supposedly pass smog, but if a smog shop sees that in california they'll just nod and walk away.
Nah I just left the dump tube where it was, spraying carbon all over my block...
I just did a bunch of computer work for my moms friends husband, I said he could pay me with welding/machining
Legitimate smog places will never pass me, recirculator or not. I just have it this way to keep the car quiet. Too much unwanted attention from police.
#70671, "RE: Pics of 3" Downpipe for Star Kit..." In response to Reply # 6 May-09-04 10:51 AM by GhEttOrAiD
Originally posted by Chamuko whats your zip? does that offer extend to the test pipe?
if you could gimme like 20 for the test pipe that would be nice
I'm in 94025
<edit> this picture doesn't really convey how bad off the old downpipe is... part of it was banged up by the shop, and it HAS been welded on FIVE times by three different people... It works, but needs repair!
#70685, "RE: Pics of 3" Downpipe for Star Kit..." In response to Reply # 11 May-09-04 03:55 PM by Uberingram
Originally posted by GhEttOrAiD wul... the new one has a flex section... its a little ways behind the oil pan my old downpipe seemed to be the weakest link, therefore it would crack all the time
A short flex section with flanges on each end instead of integrated into the DP? I'm sure it's nice and all but I'm just wondering why you chose to do it this way.
#70687, "RE: Pics of 3" Downpipe for Star Kit..." In response to Reply # 12
Originally posted by Uberingram
Originally posted by GhEttOrAiD wul... the new one has a flex section... its a little ways behind the oil pan my old downpipe seemed to be the weakest link, therefore it would crack all the time
A short flex section with flanges on each end instead of integrated into the DP? I'm sure it's nice and all but I'm just wondering why you chose to do it this way.
#70689, "RE: Pics of 3" Downpipe for Star Kit..." In response to Reply # 14
all i remember is when i was mkaing mine the guy said i HAD to put on a flex section, or it wouldnt move around the slight little it needs to, im not sure why...i nodded my head and sparked the mig _________ 96 talon esi-t san clemente, ca
#70691, "RE: Pics of 3" Downpipe for Star Kit..." In response to Reply # 12
Originally posted by Uberingram
Originally posted by GhEttOrAiD wul... the new one has a flex section... its a little ways behind the oil pan my old downpipe seemed to be the weakest link, therefore it would crack all the time
A short flex section with flanges on each end instead of integrated into the DP? I'm sure it's nice and all but I'm just wondering why you chose to do it this way.
umm.. the flex section IS integrated into the DP, you can see where its welded in and there arent any flanges
#70692, "RE: Pics of 3" Downpipe for Star Kit..." In response to Reply # 16
Originally posted by RyaN95i4
Originally posted by Uberingram
Originally posted by GhEttOrAiD wul... the new one has a flex section... its a little ways behind the oil pan my old downpipe seemed to be the weakest link, therefore it would crack all the time
A short flex section with flanges on each end instead of integrated into the DP? I'm sure it's nice and all but I'm just wondering why you chose to do it this way.
umm.. the flex section IS integrated into the DP, you can see where its welded in and there arent any flanges
#70781, "RE: Pics of 3" Downpipe for Star Kit..." In response to Reply # 17
Originally posted by Uberingram
Originally posted by RyaN95i4
Originally posted by Uberingram
Originally posted by GhEttOrAiD wul... the new one has a flex section... its a little ways behind the oil pan my old downpipe seemed to be the weakest link, therefore it would crack all the time
A short flex section with flanges on each end instead of integrated into the DP? I'm sure it's nice and all but I'm just wondering why you chose to do it this way.
umm.. the flex section IS integrated into the DP, you can see where its welded in and there arent any flanges
Search
Printer-friendly copy
2 Users in Chat
Why recirculate though? 
I'm sure it's nice and all but I'm just wondering why you chose to do it this way.
