i'm planning on mounting my FMU in the rear. i've ran a vacuum line back there, now all i need is pretty much some step by step instructions if anyone could help out at all, any info will help!!

THANKS ALOT!

"one team, one love, all skills" - REVoluzion

please help, i'm doing the install today!!!

"one team, one love, all skills" - REVoluzion

Take the return line off of the stock FPR and put it on the "OUT" side of your FMU. Take a new piece of fuel line and run from your FPR to the "IN" side of the FMU. Hook up the vacuum line. Zip tie, bolt, weld, gorilla snot everything in place. Don't forget to let of the fuel system pressure before you take that line off.

Lets just say this... I'm over 100whp and soon to cross 200whp. Thanx 2GNT! Now if I could only learn to prove it.

awesome, you rule.

"one team, one love, all skills" - REVoluzion

I am guessing your installing a star kit?

thank you kaptainmykee.com for hosting

custom pretty much.. parts from star and hrc.

"one team, one love, all skills" - REVoluzion

I see .... I just did my star install 2 or 3 weeks ago. mounting the fmu in back isnt all that bad actually... especially if your stock regulator is back there. Just make sure to eitther clamp or zip tie every hose really good.

thank you kaptainmykee.com for hosting

shouldn't be any different then mounting it under the hood except you have a short return line and a long vac line

getty up

-kent-




'98 Talon...gone, but not forgotten

got it! i boosted tonight for the first time.... i'm addicted already.
think i'm gonna go drive around. laterzzz.. thanks everyone.

"one team, one love, all skills" - REVoluzion

let me be the first to say congrats, and enjoy the boost!

thank you kaptainmykee.com for hosting