i'm planning on mounting my FMU in the rear. i've ran a vacuum line back there, now all i need is pretty much some step by step instructions if anyone could help out at all, any info will help!!

THANKS ALOT!

please help, i'm doing the install today!!!

Take the return line off of the stock FPR and put it on the "OUT" side of your FMU. Take a new piece of fuel line and run from your FPR to the "IN" side of the FMU. Hook up the vacuum line. Zip tie, bolt, weld, gorilla snot everything in place. Don't forget to let of the fuel system pressure before you take that line off.

awesome, you rule.

I am guessing your installing a star kit?

custom pretty much.. parts from star and hrc.

I see .... I just did my star install 2 or 3 weeks ago. mounting the fmu in back isnt all that bad actually... especially if your stock regulator is back there. Just make sure to eitther clamp or zip tie every hose really good.

shouldn't be any different then mounting it under the hood except you have a short return line and a long vac line :shrug

got it! i boosted tonight for the first time.... i'm addicted already.
think i'm gonna go drive around. laterzzz.. thanks everyone.

let me be the first to say congrats, and enjoy the boost!