Ok, so milan raceway opens tomarrow for test n tune. The Z is not ready for the track, but the eclipse is... Kinda. The MSD dis2 is still not working. But I can deal without that. My boost controller is setup to run 7 psi in 1st, 18 psi in 2nd and 22 psi in 3rd. I'll probably adjust the boost up in first each run until I start looseing traction. So I am on stock axels, who thinks they are gonna take a shit on me? They have about 70k miles on them.
____________________________________________________ four nails four corners four riders and four horses
#68243, "RE: Think I'm gonna break my axels?" In response to Reply # 1
If they don't break going from 1st to second, they won't.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#68253, "RE: Think I'm gonna break my axels?" In response to Reply # 5
Hey have fun at the track. If it breaks you cna just drive the z around. I am curious to see what kind of times you get. I think I might up my boost to 18psi once I get my axels next week. best time so far 14.3 @ 101.1mph(no traction) fastest 2GNT with a hitch! until proven wrong...
#68260, "RE: Think I'm gonna break my axels?" In response to Reply # 7
What are you going to run for tires, drag radials, slicks? Patrick 96 GS 14.14 @ 96.5 mph on 8psi 8 Nov.02 HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies
#68269, "RE: Think I'm gonna break my axels?" In response to Reply # 9
not to be an ass but are you running race fuel?? boosting a 16g out of efficency w/ pump = not a good idea, especially if your dis2 isn't there to help out and retard a few degrees. i'll assume you know your shit b/c of your automobiles and their setups, just checking
#68271, "RE: Think I'm gonna break my axels?" In response to Reply # 10
good luck, you may need it if you don't have spare axles with ya. In my case using Nitto 555r's on factory 16's they would snap on hard upshifts inside of the 330 mark. Depending on whether or not the track is sprayed also makes a difference, but if you figure to be at or above 250-260 at the tires don't be too surprised if they do.
-------------------------------------- know me as santiago boosted 420a and ej2o..(my 2liter v8 eaters)
#68361, "RE: Think I'm gonna break my axels?" In response to Reply # 13
Well I ended up taking the Z because I got the emanage ignition harness installed so I could actually get nuts on it.
Those are the wheels I was going to use on the eclipse. I got them for the eclipse, but they fit both cars.
Yeah the Apexi AVCR will modify the boost based on gear. Once you set your duty cycle you can goto another menu to modify it per gear. I have it set to run 7 psi in 5th as well for daily driving. That function is the reason I got the thing.
____________________________________________________ four nails four corners four riders and four horses
Search
Printer-friendly copy
1 User in Chat
I'm gonna hit the test 'n tune on wensday tho.