ok, i finally got my pistons...i got them off of ebay, dont have any spec sheet, and have no idea what they are....the guy said he thought they were 8,8:1...what did i get...ive heard long rod pistons....anyone got details for me...please help!, thanks doug
14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi screw flanders
#67607, "RE: What pistons did i get? pics inside" In response to Reply # 1
not a good start... also, the wrist pins definitely dont fit into the piston... if you can see in the picture, its just a flat pin...the part number on the bag for the pin lock thingys was.. 812-042-cs...any other help doug
14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi screw flanders
#67612, "RE: What pistons did i get? pics inside" In response to Reply # 2
ok, i measured the stock piston to the je pistons.... they are stock bore, doesnt bother me because i have an engine with only 25k miles... the wrist pin looks like its in the same exact spot as the stockers at the same height...did they make stock compression pistons? im confused as hell right now... there is a number in the piston 87 then a little m with a line under it..does that say anything? thanks doug
14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi screw flanders
#67617, "RE: What pistons did i get? pics inside" In response to Reply # 3
To start, where the hell did you get them? What are they suposed to be? Nick 97RS turbo8u> shut your SUCK ZAO684: NIPPLE warning...maybe>? turbo8u> yea i was a window licker on the short bus in junior high
#67621, "RE: What pistons did i get? pics inside" In response to Reply # 4 Mar-25-04 11:59 AM by thedawg
87m is the forging number. It's just the number of the slug before it was machined down by JE.
Are they really JE pistons? Is there a JE logo stamp inside the piston? They don't look like any JE I've seen. The wristpins are odd too. Just looking at the piston makes me think its simply a stock replacement that was custom ordered by someone. The lack of heat expansion ridges is also strange.
Mic each ringland from the piston top. Call JE engineering dept and ask them to match up your numbers with a neon part number. Have them Fax you the spec sheet.
812-042-cs is a JE Spiro lock for .782-.828 wristpins.
#67622, "RE: What pistons did i get? pics inside" In response to Reply # 5
yes they are je's...they have it stamped in the piston.... to me they look like stock compression...which i dont mind all that much because ill just run a higher compression turbo....but i dont know what to do about the wrist pins because the ones i got are not going to fit in the pistons.... could i use stock wrist pins with a set of eagle rods? thanks doug
14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi screw flanders
#67625, "RE: What pistons did i get? pics inside" In response to Reply # 6
You know... I'm trying to help you... but JE does employ a whole bunch of people that know a hell of a lot more than everyone on this board combined do about their pistons. They have a phone number that lets you talk to these smart people whenever you want.
#67629, "RE: What pistons did i get? pics inside" In response to Reply # 7
yeah, i just thought if someone had the exact ones, or could tell by the pictures, it would be a lot easier....but it looks as if im going to have to talk to them...thanks doug
14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi screw flanders
#67680, "RE: What pistons did i get? pics inside" In response to Reply # 7
Originally posted by thedawg You know... I'm trying to help you... but JE does employ a whole bunch of people that know a hell of a lot more than everyone on this board combined do about their pistons. They have a phone number that lets you talk to these smart people whenever you want.
#67843, "RE: What pistons did i get? pics inside" In response to Reply # 9
Originally posted by Super20G
Originally posted by thedawg You know... I'm trying to help you... but JE does employ a whole bunch of people that know a hell of a lot more than everyone on this board combined do about their pistons. They have a phone number that lets you talk to these smart people whenever you want.
ROFL
yeah, sometimes our knowledge just doesn't cut it....
You sound like me, lazy as hell.... Mebbe he is trying to get his post count up
Having Problems? Heres my Three step solution to anything 2gnt related. Step 1: Put down everything in your hands. Step 2: Grab a lucky strike, Smoke it. Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you. If not. Go here: here
If still nothing, your trying to hard. Start over at step 1.
#67847, "RE: What pistons did i get? pics inside" In response to Reply # 10
i called them and got all my info... they are either stock compression, or a little lower...he said anywhere from 9.25-9.6 he would guess.... thanks for the number and the help doug
14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi screw flanders
Search
Printer-friendly copy
0 Users in Chat
