Ugh this was not a fun install. Within the first hour we changed out plugs, did a compression test, removed bov and stage 1 piping, fabbed the fenderwell, and fully expected to have this done within another hour or two. After that everything started going wrong...

- First off the mounting bracket that connects to the horn wouldn't align with the mounting hole on the car no matter how much we turned or twisted the IC, so we drilled the bracket hole out bigger and it fit great, no biggy.

- Then the IC piping boot that connects to the inlet wouldn't go down any farther on the inlet hole because it was getting hung up on the hole in the black panel underneath the fuse box. We spent a good 20 minutes trying to make it work but it wouldn't...so we improvised. We had to redrill holes in the bottom of the panel and move it downward so the IC could also move downward a bit (PIA).

- If this wasn't enough, my intake piping would NOT fit. No matter what we did the filter wouldn't go on without hitting the inlet pipe. So we spent a good half hour going through it with a hacksaw. GAY.

All in all I guess I'm happy. I'm still sore from the hacksawing and my lower back is killing me but oh well. Below are pics.

*Looks like a need to clean the rust off that mani and turbine*


*Now THAT'S hot*


*Fender shot*


*Ugh, here's the slightly modded black panel for the inlet. Fuck you panel, fuck you indeed*


*And here's the boot from hell that wouldn't go over the inlet all the way, finally we managed to get it on.*


Special thanks goes out to Uber for helping me out during the wee hours of the morning! Hi Uber!

____________________________
HAD: '98 Eclipse RS

HAVE: '04 Grand Prix GTP Comp G

Also I had a quick question. My intake filter is touching one of my fan brackets. Is it alright if they're touching or will in restrict air from the fan hitting the engine?

____________________________
HAD: '98 Eclipse RS

HAVE: '04 Grand Prix GTP Comp G

congrats on the upgrade... as far as the filter, just rotate it towards the trans so it's away from the fan.


--------------------------------------
know me as santiago
boosted 420a and ej2o..(my 2liter v8 eaters)

It is rotated as far as it'll go to save room. Since that hole in the filter is off centered I have as much of pointing away from the fan as possible. Oh well...

____________________________
HAD: '98 Eclipse RS

HAVE: '04 Grand Prix GTP Comp G

Dave, what's your email?... I have a pic.


--------------------------------------
know me as santiago
boosted 420a and ej2o..(my 2liter v8 eaters)

porkandbeans88@hotmail.com

Oh you mean make the bend in the intake face towards the trans. I feel like a dope. I just went and adjusted it. Thanks man.

____________________________
HAD: '98 Eclipse RS

HAVE: '04 Grand Prix GTP Comp G

Very hot do0d.

__________________________________________
~Chris
03 SRT-4

heheh nice man, its about time!!! your sig said soon to be intercooled for WAY to long. its funny how much help it is to have someone whos done it

peekaboo


_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

silent souls leave .308 holes

looks good man. i had to do the 'hack the front fans mod' to make mine fit

______________________________
Matt D.
'06 Evo IX SE
'98 RS-T 13.8 @ 106.1

Intercoolers rock

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

I'll say! I haven't gotten to my MBC yet because I'm not up to working on my car right now so I've been hitting 4 psi and barely creeping up to 5 or 6. But when I'm driving and start boosting then let off, my EGT's will start dropping instead of hovering around the 1100-1200 range like they used to. The car seems a little more peppy during daily driving too. I'm sure I'll notice a huge difference this summer.

____________________________
HAD: '98 Eclipse RS

HAVE: '04 Grand Prix GTP Comp G