USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#65293, "RE: Boosting on stock" In response to Reply # 0
Originally posted by xtrickedeclipsex Was wondering what’s safe to boost at on stock internals... I searched didn’t find much to give me any sort of answer. Some say 5 some say 9 is o.k. no real answer… So I went over to the Hahn site, looked at the stage 2 system, says you can boost from 8-10 on STOCK internals.... Some people said there’s no way you can do that without fucking up your motor, some said u can daily drive on 8 psi I no Hahn has tested there stuff for a while...do you think 8-10 psi will hold up on stock internals? Or is Hahn trippen??
5lbs of boost is ok to run if you don't have an intercooler
8 to 10lbs of boost is ok to run if you have an front mount intercooler.
i ran my stage 2 with fmic at 10lbs of boost for about 8 months till my motor popped. other people have been able to run 12lbs of boost for years without problems. it all comes down to the tuning.
#65297, "RE: Boosting on stock" In response to Reply # 3
Originally posted by HiOnPSI You need bigger injectors before you think of boosting over 4-5psi imo. I don't care what anyone says 30lb'ers work great.
that sentence should be...
"I recommend running larger injectors over 5lbs of boost, however you CAN run 10lbs of boost on stock injectors."
Search
Printer-friendly copy
0 Users in Chat
30lb'ers work great.
