2GNT.com Forums - Viewing topic - which way to stick in my wisecos? other questions too, get your ass in this thread

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

2 Users in Chat

Turbo/Nitrous Tech

topic #63384

View in linear mode

Subject: "which way to stick in my wisecos? other questions too, get your ass in this thread"

Previous topic | Next topic

turbo8u	Jan-13-04 09:25 AM
Member since Jun 15th 2003 10552 posts,

#63384, "which way to stick in my wisecos? other questions too, get your ass in this thread"

ok i have some standard bore wisecos and i cant seem to find out which one goes which direction in which cylinder, lol. what else could i NOT know...? well theres no marks or arrows or anything on them so i have noo clue. help me out here.

another thing, any tips on installing the wrist pin and locks? ive never had to do this before but want to learn so how do i install wrist pins and locks? mototfool? dino? mototool? any help is much appreciated.

also, i broke my fucking crank sprocket so i need another one (smooooth ha?) but those of you who've done a rebuild know that things a bitch if you dont have the right tool. i eventually made something that worked, so i got it all worked out.

actually, instead of responding to this thread will someone who knows their shit call me? my numner is 949-295-2914 and its on 24/7 so call me up, my names josh.

thanks guys, im lookin forward to this weekend and dropping this beast in
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, turbo8u, Jan-11-04 02:33 PM, #1

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Team

Team

XtremeRS, Jan-11-04 02:58 PM, #2

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Global Ruler Of All Things

Global Ruler Of All Things

DarkOne, Jan-12-04 04:38 AM, #3

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, thedawg, Jan-12-04 04:58 AM, #4

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Collente, Jan-12-04 07:29 AM, #5

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Team

Team

etx, Jan-12-04 08:23 AM, #6

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, MrSlick, Jan-13-04 05:53 AM, #7

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, thedawg, Jan-13-04 09:32 AM, #8

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, MrSlick, Jan-13-04 12:16 PM, #9

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Matt_95tgs, Jan-13-04 05:00 PM, #10

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, MrSlick, Jan-14-04 12:19 AM, #11

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, turbo8u, Jan-12-04 02:46 PM, #12

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, MrSlick, Jan-13-04 12:18 PM, #13

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, vtcomp, Jan-14-04 01:55 AM, #14

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, turbo8u, Jan-14-04 05:10 AM, #15

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, lickscissors, Jan-14-04 05:25 AM, #16

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Collente, Jan-14-04 05:26 AM, #17

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, turbo8u, Jan-14-04 05:28 AM, #18

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Team

Team

etx, Jan-14-04 07:49 AM, #19

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, turbo8u, Jan-14-04 08:56 AM, #20

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, lickscissors, Jan-14-04 09:17 AM, #21

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Team

Team

etx, Jan-14-04 10:01 AM, #22

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, turbo8u, Jan-14-04 10:17 AM, #23

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, vtcomp, Jan-14-04 10:46 AM, #24

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, mototool, Jan-14-04 11:09 AM, #25

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Collente, Jan-14-04 11:22 AM, #26

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, turbo8u, Jan-14-04 01:40 PM, #27

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, grain, Jan-14-04 05:42 PM, #28

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, MrSlick, Jan-15-04 01:08 AM, #29

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, vtcomp, Jan-15-04 01:42 AM, #30

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, lickscissors, Jan-15-04 03:38 AM, #31

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Global Ruler Of All Things

Global Ruler Of All Things

DarkOne, Jan-15-04 04:46 AM, #32

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, turbo8u, Jan-15-04 05:23 AM, #33

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, lickscissors, Jan-15-04 05:47 AM, #34

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Global Ruler Of All Things

Global Ruler Of All Things

DarkOne, Jan-15-04 06:12 AM, #35

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, MrSlick, Jan-15-04 05:56 AM, #36

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Team

Team

Michael_97RS, Jan-15-04 06:31 AM, #37

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Team

Team

etx, Jan-15-04 07:04 AM, #38

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Team

Team

DR1665, Jan-15-04 07:30 AM, #39

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, turbo8u, Jan-15-04 08:27 AM, #40

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Skrilla, Jan-15-04 10:23 AM, #41

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, turbo8u, Jan-15-04 10:39 AM, #42

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Skrilla, Jan-16-04 04:30 AM, #43

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, Team

Team

DR1665, Jan-15-04 10:25 AM, #44

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, lickscissors, Jan-15-04 04:12 PM, #45

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, MrSlick, Jan-15-04 04:15 PM, #46

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, lickscissors, Jan-15-04 04:20 PM, #47

RE: which way to stick in my wisecos? other questions too, get your ass in this thread, MrSlick, Jan-15-04 11:57 PM, #48

turbo8u	Jan-11-04 02:33 PM
Member since Jun 15th 2003 10552 posts,

#63386, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 0
Jan-11-04 02:34 PM by turbo8u

8 views and no calls? you guys are worthless! emoji

come on come on come on come on come on
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Jan-11-04 02:58 PM
Member since May 20th 2003 6329 posts,

#63387, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 0

Originally posted by turbo8u
ok i have some standard bore wisecos and i cant seem to find out which one goes which direction in which cylinder, lol. what else could i NOT know...? well theres no marks or arrows or anything on them so i have noo clue. help me out here. another thing, any tips on installing the wrist pin and locks? ive never had to do this before but want to learn so how do i install wrist pins and locks? mototfool? dino? mototool? any help is much appreciated. also, i broke my fucking crank sprocket so i need another one (smooooth ha?) but those of you who've done a rebuild know that things a bitch if you dont have the right tool. i eventually made something that worked, so i got it all worked out. actually, instead of responding to this thread will someone who knows their shit call me? my numner is 949-295-2914 and its on 24/7 so call me up, my names josh. thanks guys, im lookin forward to this weekend and dropping this beast in

Originally posted by sarahdr1665 ...some girls like the "nerdy" guys

The pistons are not directional, so you can put them in however you want. I just put mine in with all weisico logos on the underside of the piston, facing the same way..i'm just picky like that. The wrist pins, just oil them up, and push them in, with the rod in the center of the piston. The locks are a bit tricky at first,but once you do a few, the rest are easy. You have to push in the locks, starting at one point, then working it down into the grove as you go along. Kinda hard to explain without showing. Just take care not to scratch the piston with the locks...

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DarkOne	Jan-12-04 04:38 AM
Donating 2GNT member 14955 posts,

#63409, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 2

The lock is basically just a snapring. Put it on like one.

The pistons should be non-directional. We found no offset on my JEs when we installed them, but i was told later that they recommend you put them in with the JE logo facing the exhaust side. Not sure if Weiscos even have a logo...

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)

Factory Service Manuals: http://nawdu.de/files/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

thedawg	Jan-12-04 04:58 AM
Donating 2GNT member 6287 posts,

#63411, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 3

Turbo8u, this is the second time I get to say "I told you" emoji
Now get your ass over to my house for a replacement crank sprocket- I just happen to have one. You'll also want the installation tool.

Here's some crappy drawings I made, but it really doesn't matter which way you install em.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Collente	Jan-12-04 07:29 AM
Member since Sep 20th 2002 2447 posts,

#63420, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 4

Good luck with the rest of it joshie... hope that it all runs once its back together...
I will be putting my beast back in this weekend also. We should smoke in celebration.

Nick
97RS

turbo8u> shut your SUCK
ZAO684: NIPPLE warning...maybe>?
turbo8u> yea i was a window licker on the short bus in junior high

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	Jan-12-04 08:23 AM
Donating 2GNT member 9740 posts,

#63425, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 5

You can stick your wisecos in the trash. emoji

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Jan-13-04 05:53 AM
Member since Jul 22nd 2002 1120 posts,

#63464, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 6

Originally posted by etx
You can stick your wisecos in the trash. emoji

Yeah ok.... if you say so.
Why is it people bash Wiseco round here? I got my Wiseco's running at 19psi daily on my setup and have had zero problems....

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

thedawg	Jan-13-04 09:32 AM
Donating 2GNT member 6287 posts,

#63480, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 7

Originally posted by MrSlick
running at 19psi daily on my setup and have had zero problems....
+SAFC
+Stock rods (yeah, stock!),
+Modified 1G SMIC
+Modified Cartech FMU
+WIP: Megasquirt, DIY Nitrous,
+Custom electronic boost controller...

You will my friend.... you definitely will. emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Jan-13-04 12:16 PM
Member since Jul 22nd 2002 1120 posts,

#63488, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 8

Originally posted by thedawg

Originally posted by MrSlick running at 19psi daily on my setup and have had zero problems.... +SAFC +Stock rods (yeah, stock!), +Modified 1G SMIC +Modified Cartech FMU +WIP: Megasquirt, DIY Nitrous, +Custom electronic boost controller...

You will my friend.... you definitely will. emoji

Whatever you say man.... thats funny because I've got over 15,000 miles now on this motor since I rebuilt.... theres a whole lot about my setup that you dont know.... like the fact that my pistons are CUSTOM...

So you can sit there thinking you know what your talking about all you like...

And another thing, when I was recently at the PRI show in Indy I spent quite q while talkin to all of the guys from JE, wiseco and CP... and you know what.... they all have top of the line pistons that are all comparable to each other... so when you actually know the specs of what your talking about then we'll talk...

This is just another one of those internet myths.... saying that Wiseco pistons suck... yeah sure.

How many people have actually melted or blown up wiseco pistons???
How many people over on neons.org are running wiseco pistons... hmmmmm... quite a lot ore than this board, and a lot more of them are putting down more power than most of the guys round here.

I'm not trying to start an arguement here, just saying that a lot of people on the net are closed minded about things that they really don't know about...

We need to start relying on fact... not rumours/myths.....

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Matt_95tgs	Jan-13-04 05:00 PM
Donating 2GNT member 1246 posts,

#63502, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 9

Originally posted by MrSlick

Originally posted by thedawg

Originally posted by MrSlick running at 19psi daily on my setup and have had zero problems.... +SAFC +Stock rods (yeah, stock!), +Modified 1G SMIC +Modified Cartech FMU +WIP: Megasquirt, DIY Nitrous, +Custom electronic boost controller...

You will my friend.... you definitely will. emoji

Whatever you say man.... thats funny because I've got over 15,000 miles now on this motor since I rebuilt.... theres a whole lot about my setup that you dont know.... like the fact that my pistons are CUSTOM... So you can sit there thinking you know what your talking about all you like... And another thing, when I was recently at the PRI show in Indy I spent quite q while talkin to all of the guys from JE, wiseco and CP... and you know what.... they all have top of the line pistons that are all comparable to each other... so when you actually know the specs of what your talking about then we'll talk... This is just another one of those internet myths.... saying that Wiseco pistons suck... yeah sure. How many people have actually melted or blown up wiseco pistons??? How many people over on neons.org are running wiseco pistons... hmmmmm... quite a lot ore than this board, and a lot more of them are putting down more power than most of the guys round here. I'm not trying to start an arguement here, just saying that a lot of people on the net are closed minded about things that they really don't know about... We need to start relying on fact... not rumours/myths.....

Here are some facts for you. I have seen several problems with Weisco pistons installed at VT Competition Engine Development in Lansing MI. They do not use the same alloy as JE and CP. They ARE of less quality. The reason you haven't seen it is because 19 psi on a s16g (or equivilant) isnt really putting any forged piston to the test (assuming that it isnt detonating like crazy). Try pushing 800 hp on CP's, then do it on Weisco's. You'll find that CP's survive where Weiscos won't. Also, I have seen several cases of Weisco pistons being more succeptable to detonation than their competitors. They make great pistons for bikes, but that's about it in my opinion. That is, if you're really pushing the limits running serious boost. The reason you don't see many (if any) problems with them around here is because the 420a is still relatively new and not many people are really pushing it to the limits yet (including the neon guys). Go post on NABR asking how some of those guys like Weiscos in their 4g63 and you'll get many ugly stories. For your average performance enthusiest, they'll work just fine, but someone trying to make insane amounts of power should stick with JE or CP.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Jan-14-04 12:19 AM
Member since Jul 22nd 2002 1120 posts,

#63514, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 10

Originally posted by Matt_95tgs

Originally posted by MrSlick

Originally posted by thedawg

Originally posted by MrSlick running at 19psi daily on my setup and have had zero problems.... +SAFC +Stock rods (yeah, stock!), +Modified 1G SMIC +Modified Cartech FMU +WIP: Megasquirt, DIY Nitrous, +Custom electronic boost controller...

You will my friend.... you definitely will. emoji

Whatever you say man.... thats funny because I've got over 15,000 miles now on this motor since I rebuilt.... theres a whole lot about my setup that you dont know.... like the fact that my pistons are CUSTOM... So you can sit there thinking you know what your talking about all you like... And another thing, when I was recently at the PRI show in Indy I spent quite q while talkin to all of the guys from JE, wiseco and CP... and you know what.... they all have top of the line pistons that are all comparable to each other... so when you actually know the specs of what your talking about then we'll talk... This is just another one of those internet myths.... saying that Wiseco pistons suck... yeah sure. How many people have actually melted or blown up wiseco pistons??? How many people over on neons.org are running wiseco pistons... hmmmmm... quite a lot ore than this board, and a lot more of them are putting down more power than most of the guys round here. I'm not trying to start an arguement here, just saying that a lot of people on the net are closed minded about things that they really don't know about... We need to start relying on fact... not rumours/myths.....

Here are some facts for you. I have seen several problems with Weisco pistons installed at VT Competition Engine Development in Lansing MI. They do not use the same alloy as JE and CP. They ARE of less quality. The reason you haven't seen it is because 19 psi on a s16g (or equivilant) isnt really putting any forged piston to the test (assuming that it isnt detonating like crazy). Try pushing 800 hp on CP's, then do it on Weisco's. You'll find that CP's survive where Weiscos won't. Also, I have seen several cases of Weisco pistons being more succeptable to detonation than their competitors. They make great pistons for bikes, but that's about it in my opinion. That is, if you're really pushing the limits running serious boost. The reason you don't see many (if any) problems with them around here is because the 420a is still relatively new and not many people are really pushing it to the limits yet (including the neon guys). Go post on NABR asking how some of those guys like Weiscos in their 4g63 and you'll get many ugly stories. For your average performance enthusiest, they'll work just fine, but someone trying to make insane amounts of power should stick with JE or CP.

Matt, your reply is very thought out, but you are assuming that every Wiseco piston is made from the same alloy.... this is simply not true.
I must say it was very cool seeing the Wiseco NASCAR and Indycar pistons while I was at the PRI booth.... the Nascar pistons were amazing.... so small...
But anyway my point is this... not every pistons is the same or made of the same material... this is true, but then also what makes you think that my Wiseco's are the same as Wiseco's made in the past???

But I do agree that JE and CP are the shit.. althouth I'd probably go with CP if I was going for the max..

I still would like to see peoples real experience with all the different forged pistons and get a comparison... but you have to take into account every part of their setup and the compression and manufacture of the piston in question.... not eveyr piston is made equal...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	Jan-12-04 02:46 PM
Member since Jun 15th 2003 10552 posts,

#63442, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 4
Jan-13-04 09:24 AM by DarkOne

Originally posted by thedawg
Turbo8u, this is the second time I get to say "I told you" emoji

lol well at least i'll have it running before yours

i just had to figure it all out myself, first hand. so no one has to explain this shit to me ever again.

thanks for all the help guys

_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Jan-13-04 12:18 PM
Member since Jul 22nd 2002 1120 posts,

#63489, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 12

Oh, and Wiseco pistons ARE offset... they do need installed in a certain orientation....

Your best bet if your not sure is just to call Wiseco... I'm sure they will answer your questions for you.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

vtcomp	Jan-14-04 01:55 AM
Member since Mar 27th 2003 89 posts,

#63516, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 13

You will get a hint of why we do not like wisecos when you go to balance them. You say that you looked at both pistons at PRI, but did you really look at them at the same time? I have a feeling that if you did you would definatly notice the difference. I'm not saying that wisecos are crap, they will be fine for most engines, I am saying that they are very low on our list. To add more, We have broken a lot of wiseco pistons, most of them failing in ways that was only due to poor materials and manufacturing practices.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	Jan-14-04 05:10 AM
Member since Jun 15th 2003 10552 posts,

#63532, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 14

ok need some more help real fast....about the locks....they are BITCHES, ugh. ok i got the wrist pins in, as easy as those were, then got one snap ring in one side but the wrist pin wont go down far enough to give me enough clearance on the other side....i dont fucking get it emoji , anybody?

wisecos arent as good as CP and JE, duh. but how much do you pay for CP's and JE's? probly twice what i paid. besides, i have a new 0 miles block and standard bore wisecos, how easy is that? drop that shit in. thats the only reason i went with wiseco, i bet you all they will be fine too but we'll just have to see. i'm not going to be running 800hp matt....and no one else on here is either.
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Jan-14-04 05:25 AM
Member since May 07th 2003 1206 posts,

#63534, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 15

i was quoted 107$ per JE piston....where can i get Wiseco pistons for cheaper than that???? im willing to give them a try if i can save a good amount of money
doug

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Collente	Jan-14-04 05:26 AM
Member since Sep 20th 2002 2447 posts,

#63535, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 14

Originally posted by vtcomp
You will get a hint of why we do not like wisecos when you go to balance them. You say that you looked at both pistons at PRI, but did you really look at them at the same time? I have a feeling that if you did you would definatly notice the difference. I'm not saying that wisecos are crap, they will be fine for most engines, I am saying that they are very low on our list. To add more, We have broken a lot of wiseco pistons, most of them failing in ways that was only due to poor materials and manufacturing practices.

Pwn3d!!!

Nick
97RS

turbo8u> shut your SUCK
ZAO684: NIPPLE warning...maybe>?
turbo8u> yea i was a window licker on the short bus in junior high

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	Jan-14-04 05:28 AM
Member since Jun 15th 2003 10552 posts,

#63536, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 17

Originally posted by Collente

Originally posted by vtcomp You will get a hint of why we do not like wisecos when you go to balance them. You say that you looked at both pistons at PRI, but did you really look at them at the same time? I have a feeling that if you did you would definatly notice the difference. I'm not saying that wisecos are crap, they will be fine for most engines, I am saying that they are very low on our list. To add more, We have broken a lot of wiseco pistons, most of them failing in ways that was only due to poor materials and manufacturing practices.

Pwn3d!!!

stfu nick.

so any help on the locks?

_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	Jan-14-04 07:49 AM
Donating 2GNT member 9740 posts,

#63547, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 18

That's strange turbo8u... Are you sure the pins are all the way in?

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	Jan-14-04 08:56 AM
Member since Jun 15th 2003 10552 posts,

#63554, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 19
Jan-14-04 09:02 AM by turbo8u

what a fucking bust.

just talked to wiseco on the phone and they told me its a bitch and everyone calls about it. they said the wrist pin is to long so you have to cut the lock, wtf...? i knew something was fucked up about this

i got them all in though and they seem like they'll hold good. my fingers hurt like a BITCH, omg....fuck that shit, JE's are a million times easier

anyone with wisecos knows EXACTLY what i'm talking about. so if any of you ever have problems with them PM me fo sho, i'll walk you through the way i did it

edit: heres a small picture of what it all sort of looks like

_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Jan-14-04 09:17 AM
Member since May 07th 2003 1206 posts,

#63556, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 20

how much were the wisecos?

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	Jan-14-04 10:01 AM
Donating 2GNT member 9740 posts,

#63561, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 21

So the spring lock was too large and you had to cut it? That's nice.

Lick, you should be able to pickup 4 JE's 20 over 8.8:1 for ~$350. That's thier most common part for us so they usually have them in stock.

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	Jan-14-04 10:17 AM
Member since Jun 15th 2003 10552 posts,

#63562, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 22

Originally posted by etx
So the spring lock was too large and you had to cut it? That's nice.

yea the spring lock was to big, so i cut about 3mm off it or so and it worked fine. how retarded is that shit though?

saturday she goes in, look out for some pics emoji

_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

vtcomp	Jan-14-04 10:46 AM
Member since Mar 27th 2003 89 posts,

#63563, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 23

Originally posted by turbo8u

Originally posted by etx So the spring lock was too large and you had to cut it? That's nice.

yea the spring lock was to big, so i cut about 3mm off it or so and it worked fine. how retarded is that shit though? saturday she goes in, look out for some pics emoji

_________ 96 talon esi-t san clemente, ca DarkOne> Screw you guys, i'm going home. chrysler kid> and fyi i have never HAD to shave. DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665 ...some girls like the "nerdy" guys

This type of thing is exactly my point. If they didn't take the time to even check the locks, i'm sure the pistons were carefully inspected for flaws.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

mototool	Jan-14-04 11:09 AM
Member since Sep 16th 2003 172 posts,

#63564, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 24
Jan-14-04 11:10 AM by mototool

Originally posted by vtcompThis type of thing is exactly my point. If they didn't take the time to even check the locks, i'm sure the pistons were carefully inspected for flaws.

Hey VT: STFU .... you're not allowed to make smart ass comments like I am so you should just STFU u n00b.

Originally posted by turbo8uwisecos arent as good as CP and JE, duh. but how much do you pay for CP's and JE's? probly twice what i paid.

The funniest part of that statement is that you're trying to justify the low quality of Wiseco pistons by saying you got a deal. Amusing. emoji

Originally posted by turbo8u
besides, i have a new 0 miles block and standard bore wisecos, how easy is that? drop that shit in.

Yeah, drop it in! Nevermind getting them BALANCED. Nevermind the piston to wall clearance that won't be correct if you just drop the pistons in. Nevermind all that stuff. It's not important.

Originally posted by turbo8u thats the only reason i went with wiseco, i bet you all they will be fine too but we'll just have to see.

Just don't get them hot, and you'll be set, right?

Originally posted by turbo8u
just talked to wiseco on the phone and they told me its a bitch and everyone calls about it. they said the wrist pin is to long so you have to cut the lock, wtf...?

Ahh, yes, a fine example of craftsmanship and quality control - that's Wiseco for you

You have to cut the locks?! Haahahahaha!

Originally posted by turbo8u
i got them all in though and they seem like they'll hold good. my fingers hurt like a BITCH, omg....fuck that shit, JE's are a million times easier

You know, they make things like pliers, and scratch awls and other things normal people call "tools" ... you should try them someday.

And maybe JE's are easier because they at least eyeball the size of the wristpin. Wiseco just has some 4 year old ethiopian throw some locks in the box and hope they fit right. Way to go Wiseco!

Originally posted by turbo8u
yea the spring lock was to big, so i cut about 3mm off it or so and it worked fine. how retarded is that shit though?

You do a good job answering your own questions. It's indicative of the quality of your pistons.

Originally posted by turbo8u
saturday she goes in, look out for some pics

Hey, don't forget to post the pics when you pull them back out, too, okay? After they get hot, and your piston-to-wall clearance goes to shit, I want to see pics of the scraped up cylinder walls. Way to save $20!

Mototool - The other white meat!

"He might just be more badass than Dino." -DR1665

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Collente	Jan-14-04 11:22 AM
Member since Sep 20th 2002 2447 posts,

#63565, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 23

WTF.. thats not very comferting to know that you had to cut a clip that was to big. Then you finally got it to go on. I hope that shit holds up for you man. I dont know of anyway sort of stress tests. But if your not 100% sure I wouldn't do it.
That would suck a dick to shoot a piston through your head.

Nick
97RS

turbo8u> shut your SUCK
ZAO684: NIPPLE warning...maybe>?
turbo8u> yea i was a window licker on the short bus in junior high

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	Jan-14-04 01:40 PM
Member since Jun 15th 2003 10552 posts,

#63578, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 26
Jan-14-04 01:48 PM by turbo8u

-"The funniest part of that statement is that you're trying to justify the low quality of Wiseco pistons by saying you got a deal. Amusing."

thats funny? i'm only going to run 15psi, i think they'll be fine. why dont you shut the fuck up, no one wants to hear your bullshit.

-"Yeah, drop it in! Nevermind getting them BALANCED. Nevermind the piston to wall clearance that won't be correct if you just drop the pistons in. Nevermind all that stuff. It's not important."

thats why i checked the clearances with feeler gauges, mototard.

-"Just don't get them hot, and you'll be set, right?"

that was pretty clever....<cough>

-"You know, they make things like pliers, and scratch awls and other things normal people call "tools" ... you should try them someday.

i used tools, but its easier to use your fingers. you dont even understand the way it all looked so shut the fuck up.

-" Wiseco just has some 4 year old ethiopian throw some locks in the box and hope they fit right. Way to go Wiseco!"

yup, pretty sure exactly what all the guys at neons.org would say too

-"You do a good job answering your own questions. It's indicative of the quality of your pistons."

you think im going to boost like 25psi or something. i have a sidemount, and a 16g, i'm going to run 15, the wisecos will be fine.

-"Hey, don't forget to post the pics when you pull them back out, too, okay? After they get hot, and your piston-to-wall clearance goes to shit, I want to see pics of the scraped up cylinder walls. Way to save $20!"

mototard.....no one wants to hear you talk shit. do you ever post something positive? if not, shut the fuck up

im curious as to what the mods think of you and your willingness to bash so quickly. you need the fuckin boot imo, get the fuck out of here with your negative comments and queer comments on dino's man juice you fuckin queer.

nick: im not gunna put a piston through the head man emoji
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

grain	Jan-14-04 05:42 PM
Donating 2GNT member 2551 posts,

#63605, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 27

im glad i got cp's

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Jan-15-04 01:08 AM
Member since Jul 22nd 2002 1120 posts,

#63611, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 28

This is all rather amusing....

Before you all go jumping to conclusions.... here's a little about my wiseco's...

They were all perfectly balanced when I got them.. an dyes I checked them.
The wrist pin and locks were the right size... but mine are installed different from the norm...
My pistons were made custom.... they were a new design at the time when I got them... (about 6 months ago now)

Oh, and as for me not comparing pistons at the PRI show... whatever you say buddy... you obviously know me a lot better than I know myself.... emoji
How bout next December you come take a look with me.... have YOU ever seen some of the Wiseco Nascar or Indy pistons? Have YOU ever seen some of the sweet custom pistons that they have?

I'm not trying to say that Wiseco are the shit... everyone knows CP and JE are the best untill proven otherwise....
But know this... I'm running a pretty unusual setup here.... I'm going to find out EXACTLY how much boost and power the Wiseco's and my stock rods can take...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

vtcomp	Jan-15-04 01:42 AM
Member since Mar 27th 2003 89 posts,

#63614, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 29

Originally posted by MrSlick
How bout next December you come take a look with me.... have YOU ever seen some of the Wiseco Nascar or Indy pistons? Have YOU ever seen some of the sweet custom pistons that they have?

that's pretty funny. PRI? where's PRI? We only had a booth there.......

I'm not saying that they can't build sweet looking custom pistons, I just got tired of pulling engines apart because of stupid piston failures that should have never happened.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Jan-15-04 03:38 AM
Member since May 07th 2003 1206 posts,

#63616, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 30

MRSLICK, im giving you a thumbs up on being a guiney pig for the stock rods

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DarkOne	Jan-15-04 04:46 AM
Donating 2GNT member 14955 posts,

#63620, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 31

Originally posted by lickscissors
MRSLICK, im giving you a thumbs up on being a guiney pig for the stock rods

it's been done. They faily at roughly 350 crank.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)

Factory Service Manuals: http://nawdu.de/files/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	Jan-15-04 05:23 AM
Member since Jun 15th 2003 10552 posts,

#63622, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 32

ok i found out that the piston's wrist pin is .004 offset from the outside of the skirt and the short side = exhaust side.

_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Jan-15-04 05:47 AM
Member since May 07th 2003 1206 posts,

#63624, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 33

350 crank?!?!?!....then what the hell do i need new rods for....im only running MAXIMUM 18psi with a 14b 8.6:1 compression....do i really need new rods...i was estimating that to be about 275-300hp to the crank...also have exhaust, udp, msd, wires, camgears..... do you think i really need new rods?
doug

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DarkOne	Jan-15-04 06:12 AM
Donating 2GNT member 14955 posts,

#63629, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 34
Jan-15-04 06:12 AM by DarkOne

350 or so. it's a rough estimate. At the wheels that would be low 300's. I made that on 15psi untuned, on a turbo much bigger than a 14b, though.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)

Factory Service Manuals: http://nawdu.de/files/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Jan-15-04 05:56 AM
Member since Jul 22nd 2002 1120 posts,

#63625, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 30

Originally posted by vtcomp

Originally posted by MrSlick How bout next December you come take a look with me.... have YOU ever seen some of the Wiseco Nascar or Indy pistons? Have YOU ever seen some of the sweet custom pistons that they have?

that's pretty funny. PRI? where's PRI? We only had a booth there....... I'm not saying that they can't build sweet looking custom pistons, I just got tired of pulling engines apart because of stupid piston failures that should have never happened.

Cool, I didn't notice you guys there... if I had I would have stopped by...

And if my Wiseco's can hold all I throw at them then all the better for me I guess....
But my next motor will more thna likelly be a diff setup... so I'll see what I can get out of this one....

And the stock rods aint that bad, their powdered forged rods.... not as good as regular billet forged, but better than your average rod....

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Michael_97RS	Jan-15-04 06:31 AM
Donating 2GNT member 5866 posts,

#63630, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 36

The only problem I see with this arguement is the comparison of custom Wisco's to their standard stock pistons. I'm going to bet they are not the same material composition or craftsmanship. You get what you pay for in most cases.

Exile Racing Technologies: http://www.exileracing.com
una salus victus
Mods List: http://highlander.dsmpower.com/sig.htm

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	Jan-15-04 07:04 AM
Donating 2GNT member 9740 posts,

#63634, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 28
Jan-15-04 07:07 AM by etx

Originally posted by grain
im glad i got cp's

You should be! emoji

Turbo your putting stock bore wisecos in? No machine work emoji

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DR1665	Jan-15-04 07:30 AM
Donating 2GNT member 14692 posts,

#63637, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 38

I just had a gas station chicken and cheese burrito. YAY!

I think the only problem with my Wiescos was that I installed them myself. emoji (Anyone else picture Mototool falling out of his chair laughing right now?) Haha. Relative to the subject of the thread, since it's seems like this is a catch-all thread for just about everything piston/rod related, my 10.5:1s had to be installed a specific way. I learned this the hard way when I listened to the choad at the machine shop when he said to be sure to install them a specific way and when John and I put the head on a cranked it by hand, they made contact. Had to pull it all apart and spin them 180.

Oh well. I'm going to be probably doing a re-ring in a few weeks time when I get the head replaced. I'll be sure to take pictures of everything after 11k or so on them and we'll see what we shall see. emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	Jan-15-04 08:27 AM
Member since Jun 15th 2003 10552 posts,

#63642, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 39

dont worry, they're going in the right way. checking all the clearances and getting it balanced.

encouragement would be nice you bitches, emoji
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Skrilla	Jan-15-04 10:23 AM
Donating 2GNT member 1868 posts,

#63644, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 40

Originally posted by turbo8u
dont worry, they're going in the right way. checking all the clearances and getting it balanced. encouragement would be nice you bitches, emoji

_________ 96 talon esi-t san clemente, ca DarkOne> Screw you guys, i'm going home. chrysler kid> and fyi i have never HAD to shave. DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665 ...some girls like the "nerdy" guys

I got your back, I installed stock bore 12.5:1 on my 1st rebuild no problems and still no problems (I sold the engine to my friend). His compression is good but not the 12.5 (no honing=compresion loss) but he runns it still. the only down fall is that he goes through 1/2 pint every other week, really that's no big deal to me...I say go for it you will be good

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by YourInMyMirror95GS
dick teaser's should be rounded up and shot in the forehead

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon! emoji

Originally posted by Dark0ne
Thanks. Now excuse me while i fuck your sister.

"fuck all motor" -turbo ate you

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	Jan-15-04 10:39 AM
Member since Jun 15th 2003 10552 posts,

#63646, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 41

Originally posted by Skrilla
I got your back, I installed stock bore 12.5:1 on my 1st rebuild no problems and still no problems (I sold the engine to my friend). His compression is good but not the 12.5 (no honing=compresion loss) but he runns it still. the only down fall is that he goes through 1/2 pint every other week, really that's no big deal to me...I say go for it you will be good

thanks josiah

, you kick ass. we're gunna have fun saturday and sunday my friend

::anticipation::

_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Skrilla	Jan-16-04 04:30 AM
Donating 2GNT member 1868 posts,

#63689, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 42

Originally posted by turbo8u

Originally posted by Skrilla I got your back, I installed stock bore 12.5:1 on my 1st rebuild no problems and still no problems (I sold the engine to my friend). His compression is good but not the 12.5 (no honing=compresion loss) but he runns it still. the only down fall is that he goes through 1/2 pint every other week, really that's no big deal to me...I say go for it you will be good

thanks josiah

, you kick ass. we're gunna have fun saturday and sunday my friend ::anticipation:: _________ 96 talon esi-t san clemente, ca DarkOne> Screw you guys, i'm going home. chrysler kid> and fyi i have never HAD to shave. DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665 ...some girls like the "nerdy" guys

YES WE ARE!!!

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by YourInMyMirror95GS
dick teaser's should be rounded up and shot in the forehead

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon! emoji

Originally posted by Dark0ne
Thanks. Now excuse me while i fuck your sister.

"fuck all motor" -turbo ate you

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DR1665	Jan-15-04 10:25 AM
Donating 2GNT member 14692 posts,

#63645, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 40

Originally posted by turbo8u
encouragement would be nice you bitches, emoji

YOU CAN DO EET! emoji

Bitch.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Jan-15-04 04:12 PM
Member since May 07th 2003 1206 posts,

#63668, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 44

MRSLICK, what turbo are you running? what do you guys think of 18psi with stock rods? im probably going to get JE pistons....but i would love to be able to use my stock rods and put that money for cams
doug

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Jan-15-04 04:15 PM
Member since Jul 22nd 2002 1120 posts,

#63669, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 45

Originally posted by lickscissors
MRSLICK, what turbo are you running? what do you guys think of 18psi with stock rods? im probably going to get JE pistons....but i would love to be able to use my stock rods and put that money for cams doug

I'm running a ported Big 16G turbo...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Jan-15-04 04:20 PM
Member since May 07th 2003 1206 posts,

#63670, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 46

i thought you said you were running 19?... i guess i could of just looked at your mod list.... well i think im convinced on staying with my stock rods
doug

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Jan-15-04 11:57 PM
Member since Jul 22nd 2002 1120 posts,

#63681, "RE: which way to stick in my wisecos? other questions too, get your ass in this thread"
In response to Reply # 47

Originally posted by lickscissors
i thought you said you were running 19?... i guess i could of just looked at your mod list.... well i think im convinced on staying with my stock rods doug

I just haven't changed my mod list in my sig for a while.... I guess now would be a good time to do that... haha.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

Turbo/Nitrous Tech

topic #63384

Previous topic | Next topic

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com

Generated in 0.096 seconds, executing 110 queries.