2GNT.com Forums - Viewing topic

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

2 Users in Chat

Top

2GNT Technical

Turbo/Nitrous Tech

topic #63355

View in linear mode

Subject: "damnit 349whp..."

Previous topic | Next topic

siueclipse	Jan-10-04 06:53 PM
Member since Nov 28th 2002 3504 posts,

#63355, "damnit 349whp..."

made a few adjustments.. hit 349.. looks like i can't get anymore from this setup. time for something new to get added.. new axles and cams. then.. 75 shot. im going to break 400whp before this next season i sware to god..

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: damnit 349whp..., Steve, Jan-10-04 06:56 PM, #1

RE: damnit 349whp..., siueclipse, Jan-10-04 06:57 PM, #2

RE: damnit 349whp..., siueclipse, Jan-10-04 06:59 PM, #3

RE: damnit 349whp..., thegame, Jan-10-04 10:46 PM, #4

RE: damnit 349whp..., Nitrous_RS1997, Jan-11-04 01:10 AM, #5

RE: damnit 349whp..., widebodied, Jan-11-04 02:25 AM, #6

RE: damnit 349whp..., siueclipse, Jan-11-04 07:50 AM, #7

RE: damnit 349whp..., widebodied, Jan-11-04 08:16 AM, #8

RE: damnit 349whp..., Therein10, Jan-13-04 02:51 PM, #9

RE: damnit 349whp..., siueclipse, Jan-13-04 03:05 PM, #10

RE: damnit 349whp..., Therein10, Jan-14-04 08:06 AM, #11

RE: damnit 349whp..., fly1, Jan-11-04 03:04 AM, #12

RE: damnit 349whp..., Strauss, Jan-11-04 04:29 AM, #13

RE: damnit 349whp..., Johnl1232, Jan-11-04 04:47 AM, #14

RE: damnit 349whp..., Skrilla, Jan-11-04 07:07 AM, #15

RE: damnit 349whp..., TXTurboGS, Jan-11-04 07:43 AM, #16

RE: damnit 349whp..., siueclipse, Jan-11-04 12:53 PM, #17

RE: damnit 349whp..., fly1, Jan-11-04 01:43 PM, #18

RE: damnit 349whp..., Team

ner947, Jan-11-04 02:13 PM, #19

RE: damnit 349whp..., Nitrous_RS1997, Jan-11-04 03:36 PM, #20

RE: damnit 349whp..., siueclipse, Jan-11-04 03:44 PM, #21

RE: damnit 349whp..., Remy, Jan-11-04 05:58 PM, #22

RE: damnit 349whp..., Team

ner947, Jan-12-04 02:51 AM, #23

RE: damnit 349whp..., siueclipse, Jan-12-04 03:43 AM, #24

RE: damnit 349whp..., PowerEclipses, Jan-12-04 06:17 AM, #25

RE: damnit 349whp..., siueclipse, Jan-12-04 06:33 AM, #26

RE: damnit 349whp..., Team

etx, Jan-12-04 08:20 AM, #27

RE: damnit 349whp..., siueclipse, Jan-12-04 09:57 AM, #28

RE: damnit 349whp..., BigBald, Jan-12-04 10:01 AM, #29

RE: damnit 349whp..., TXTurboGS, Jan-12-04 10:26 AM, #30

RE: damnit 349whp..., siueclipse, Jan-12-04 01:43 PM, #31

RE: damnit 349whp..., widebodied, Jan-12-04 05:20 PM, #32

RE: damnit 349whp..., TXTurboGS, Jan-12-04 06:23 PM, #33

RE: damnit 349whp..., thegame, Jan-13-04 12:57 AM, #34

RE: damnit 349whp..., Team

ner947, Jan-13-04 02:54 AM, #35

RE: damnit 349whp..., siueclipse, Jan-13-04 03:10 AM, #36

RE: damnit 349whp..., siueclipse, Jan-13-04 03:09 AM, #37

RE: damnit 349whp..., Remy, Jan-14-04 03:02 PM, #38

RE: damnit 349whp..., Mattchew, Jan-14-04 03:52 PM, #39

RE: damnit 349whp..., Skrilla, Jan-13-04 04:50 AM, #40

RE: damnit 349whp..., siueclipse, Jan-13-04 05:09 AM, #41

RE: damnit 349whp..., turbo8u, Jan-13-04 06:55 AM, #42

RE: damnit 349whp..., Team

etx, Jan-13-04 07:02 AM, #43

RE: damnit 349whp..., TXTurboGS, Jan-13-04 08:29 AM, #44

RE: damnit 349whp..., Initial DSM, Jan-13-04 01:20 PM, #45

RE: damnit 349whp..., siueclipse, Jan-13-04 02:16 PM, #46

RE: damnit 349whp..., 95redesi, Jan-13-04 02:40 PM, #47

RE: damnit 349whp..., Eclipse2NR, Jan-13-04 05:25 PM, #48

RE: damnit 349whp..., siueclipse, Jan-13-04 05:30 PM, #49

RE: damnit 349whp..., Mattchew, Jan-14-04 03:45 AM, #50

Where is your dyno!!, Skrilla, Jan-14-04 04:19 AM, #51

RE: Where is your dyno!!, bullox, Jan-14-04 04:23 AM, #52

RE: Where is your dyno!!, siueclipse, Jan-14-04 04:54 AM, #53

RE: Where is your dyno!!, Mattchew, Jan-14-04 06:18 AM, #54

RE: Where is your dyno!!, corsagsbo, Jan-14-04 06:48 AM, #55

RE: Where is your dyno!!, Mattchew, Jan-14-04 07:05 AM, #56

RE: Where is your dyno!!, Team

etx, Jan-14-04 07:31 AM, #57

RE: Where is your dyno!!, corsagsbo, Jan-14-04 07:31 AM, #58

RE: Where is your dyno!!, Therein10, Jan-14-04 08:29 AM, #59

RE: Where is your dyno!!, corsagsbo, Jan-14-04 08:43 AM, #60

RE: Where is your dyno!!, Mattchew, Jan-14-04 09:59 AM, #61

RE: Where is your dyno!!, Z87RSMan, Jan-14-04 12:42 PM, #62

RE: Where is your dyno!!, Mattchew, Jan-14-04 02:46 PM, #63

RE: Where is your dyno!!, Team

etx, Jan-16-04 03:31 PM, #64

RE: Where is your dyno!!, widebodied, Jan-14-04 05:07 PM, #65

RE: Where is your dyno!!, MrSlick, Jan-15-04 01:12 AM, #66

RE: Where is your dyno!!, siueclipse, Jan-15-04 05:30 AM, #67

RE: Where is your dyno!!, MrSlick, Jan-15-04 05:57 AM, #68

RE: Where is your dyno!!, siueclipse, Jan-16-04 04:15 AM, #69

RE: damnit 349whp..., MajinVejitaXV, Jan-16-04 09:24 AM, #70

RE: damnit 349whp..., siueclipse, Jan-18-04 05:10 PM, #71

RE: damnit 349whp..., grain, Jan-19-04 01:18 PM, #72

Steve	Jan-10-04 06:56 PM
Member since Sep 15th 2003 1542 posts,

#63357, "RE: damnit 349whp..."
In response to Reply # 0

Good luck man..I love your car

Steve-o
Top secret.

Originally posted by FlyinEsi
I guess I'll just have to live with a 500+ hp AWD 4-banger. emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-10-04 06:57 PM
Member since Nov 28th 2002 3504 posts,

#63358, "RE: damnit 349whp..."
In response to Reply # 1

Originally posted by Steve
Good luck man..I love your car

wasn't what i was hoping for.. though.. thanx man.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-10-04 06:59 PM
Member since Nov 28th 2002 3504 posts,

#63359, "RE: damnit 349whp..."
In response to Reply # 2

btw.. this was good old 93 octane... sorry im a little ticked. had high hopes because of the changes that were made to the tuned setup and they didn't work out to the "mathematical theory".. what is that anyway? i think its a bunch of bullshit.. lol

james

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

thegame	Jan-10-04 10:46 PM
Member since Oct 08th 2002 1311 posts,

#63362, "RE: damnit 349whp..."
In response to Reply # 3
Jan-10-04 10:48 PM by thegame

i tried going to your site first but that didnt work. so... what fuel setup do u have? u also have the s20g correct? 349whp is still really good though. keep on workin at it, youll get your 400whp. good job so fa

14.5 @ 95mph / 7psi 185hp/180tq emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nitrous_RS1997	Jan-11-04 01:10 AM
Donating 2GNT member 1311 posts,

#63363, "RE: damnit 349whp..."
In response to Reply # 4

Dont you have the 8-injector setup? if not, and if you dont mind saying, what kind of fuel/computer setup are yoy using? great dyno BTW.

1999 Black C5
1997 Silver RS
Wiseco 8.8:1 Pistons(back to low compression!)
Eagle Rods
T3/T4 Turbo
Custom FMIC
Greddy Exhaust
390's
Most current 1/8th mile time: 8.3@90mph 2.015 60'(Nitto Drag radials, i suck)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

widebodied	Jan-11-04 02:25 AM
Member since Oct 22nd 2002 2257 posts,

#63364, "RE: damnit 349whp..."
In response to Reply # 5

think he runs 440s, sfmu i think. siu- what boost level was you at?

you cant make anymore improvements because your limited on fuel?

let us know

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-11-04 07:50 AM
Member since Nov 28th 2002 3504 posts,

#63373, "RE: damnit 349whp..."
In response to Reply # 4

gsturbo.com is down.. i haven't bothered to put it back up yet. i will eventually. im using the 20g.

----

Im not running the 8 injector setup. 440's with just an sfmu.

----

21lbs of boost on that run, i was making adjustments on the sfmu. all i did was lean it out some. i can't do anymore simply because of the 440's. ive been thinking abuot going to the 8 injector setup, but from what ive heard it costs a lot to build and i want to see what hrc has going for them.

----

im not running an afc or anything so im sure im still rich.

----

supposidly im losing whp because im ported and polished but dont have the cams to use that extra airflow. i think once i get cams ill see a vast improvement.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

widebodied	Jan-11-04 08:16 AM
Member since Oct 22nd 2002 2257 posts,

#63374, "RE: damnit 349whp..."
In response to Reply # 7

Originally posted by siueclipse
i think once i get cams ill see a vast improvement.

crane #16s

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Therein10	Jan-13-04 02:51 PM
Member since Feb 02nd 2003 83 posts,

#63496, "RE: damnit 349whp..."
In response to Reply # 7

Stop babying it then. I just added another pound the other day to make it so I am running 28 psi on 91 Octane with no problems. Haven't been to the dyno yet but you can imagine. When its WOT in 4th gear at around 100mph the tires still spin. So its decent. So come atleast run 25 or 26 psi!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-13-04 03:05 PM
Member since Nov 28th 2002 3504 posts,

#63497, "RE: damnit 349whp..."
In response to Reply # 9

Originally posted by Therein10
Stop babying it then. I just added another pound the other day to make it so I am running 28 psi on 91 Octane with no problems. Haven't been to the dyno yet but you can imagine. When its WOT in 4th gear at around 100mph the tires still spin. So its decent. So come atleast run 25 or 26 psi!

lol thats a lot of juice. i can't run that yet

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Therein10	Jan-14-04 08:06 AM
Member since Feb 02nd 2003 83 posts,

#63548, "RE: damnit 349whp..."
In response to Reply # 10

Why not? Do you have an msd dis-2? And a good fuel system?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

fly1	Jan-11-04 03:04 AM
Donating 2GNT member 1470 posts,

#63366, "RE: damnit 349whp..."
In response to Reply # 0

I know you're disappointed, but still good numbers. If you're running the 20G, there's definitely more in it. Be patient and keep tuning, man. What's your fuel setup and boost level? Depending on what the wideband O2 shows, try 114 octane and up the boost to like 25psi. So, that makes two of us that will be tuning for 400 whp this seaso

___________
Kon C

"Sometimes, a man has to do what a man has to do."

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Strauss	Jan-11-04 04:29 AM
Donating 2GNT member 953 posts,

#63368, "RE: damnit 349whp..."
In response to Reply # 12

I agree with fly1......mix in some race gas and try some more boost. If that don't help, open that damn bottle and go for it emoji Oh, and good numbers by the way

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Johnl1232	Jan-11-04 04:47 AM
Member since Oct 26th 2003 44 posts,

#63370, "RE: damnit 349whp..."
In response to Reply # 13

How can u be mad cuz u made 349whp? hehe. Oh and btw ur website dont work emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Skrilla	Jan-11-04 07:07 AM
Donating 2GNT member 1868 posts,

#63371, "RE: damnit 349whp..."
In response to Reply # 0
Jan-11-04 07:25 AM by Skrilla

your car is pretty sick but what was your setup. You don't have to give specific AFC settings(if that is what you use - but what do you use for fuel control) but you can definitely get more outta a 20G and tell us what you got I'm reading like 3 different things here.

I also think you can get more though I got 4HP more outta less than you're working with. I'd try some aqua mist}( compression bump, and more pressure. It's safe to say that we can do 25lbs with timing control on pump so I say you aren't doing one of these I mentioned. I think you can get close to 400whp on pump all turbo (LOL, as apposed to all motor and NO NOS!).

Anyway fill us in

EDIT: can you say tolulene

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by YourInMyMirror95GS
dick teaser's should be rounded up and shot in the forehead

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon! emoji

Originally posted by Dark0ne
Thanks. Now excuse me while i fuck your sister.

"fuck all motor" -turbo ate you

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

TXTurboGS	Jan-11-04 07:43 AM
Member since Sep 29th 2003 333 posts,

#63372, "RE: damnit 349whp..."
In response to Reply # 15

Those are very nice numbers. You are not running any sort of piggyback computer right? Just the SFMU and 440cc. I cannot wait to get my 20g.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-11-04 12:53 PM
Member since Nov 28th 2002 3504 posts,

#63380, "RE: damnit 349whp..."
In response to Reply # 0

well i finally bought axles so i can launch. cams will come someday.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

fly1	Jan-11-04 01:43 PM
Donating 2GNT member 1470 posts,

#63382, "RE: damnit 349whp..."
In response to Reply # 17

Siueclipse, since you're using 440cc's, an S-FMU, and boosting 21psi, what was the wideband O2 showing? Others might disagree with me here, but I think the 440cc's are maxed out. 349 fwhp is nothing to sneeze at, and I think you'll see even more with bigger injector emoji

___________
Kon C

"Sometimes, a man has to do what a man has to do."

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

ner947	Jan-11-04 02:13 PM
Donating 2GNT member 3168 posts,

#63385, "RE: damnit 349whp..."
In response to Reply # 18

Originally posted by fly1
Others might disagree with me here, but I think the 440cc's are maxed out. 349 fwhp is nothing to sneeze at, and I think you'll see even more with bigger injector emoji

yeah... 21 psi on a 20g wiht 440's and a S-FMU is kinda pushing it. sounds like it's time to upgrade to a serious fuel system (something along the lines of either adding 4 more injectors, e-manange, MS, or a DFI)

personally, i have a S-FMU and 415's, and when i approach 19 psi of boost i can't keep .94+ volts on the oxygen sensor. at that boost pressure fuel pressures are very high, around 110 psi of fuel.

IMO, the reason you are only getting ~350 WHP with that setup is because you still have stock cams. the stock cams were designed with emissions regulations in mind, to idle very nicely in stock trim at 800 rpm's, and for an engine that never went into boost generating only 140 BHP. on my setup, the stock cams seem to run out of sufficient lift and duration around 5000+ rpm's. once i decide on how i want to upgrade my fuel system (and pass emissions) i'm going to get some crower stage 3's or something excessively aggressive to open up the airflow through my ported cylinder head and make use of my new oversized valves. might as well do it once and do it right and go all out...

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nitrous_RS1997	Jan-11-04 03:36 PM
Donating 2GNT member 1311 posts,

#63388, "RE: damnit 349whp..."
In response to Reply # 19

i have 290cc injectors in my car right now, and run 17psi. the A/F gauge reads a solid .95-.97, and EGT's never get over 1500, so im good. need to get it on the dyno again.

1999 Black C5
1997 Silver RS
Wiseco 8.8:1 Pistons(back to low compression!)
Eagle Rods
T3/T4 Turbo
Custom FMIC
Greddy Exhaust
390's
Most current 1/8th mile time: 8.3@90mph 2.015 60'(Nitto Drag radials, i suck)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-11-04 03:44 PM
Member since Nov 28th 2002 3504 posts,

#63390, "RE: damnit 349whp..."
In response to Reply # 20

Originally posted by Nitrous_RS1997
i have 290cc injectors in my car right now, and run 17psi. the A/F gauge reads a solid .95-.97, and EGT's never get over 1500, so im good. need to get it on the dyno again.

1999 Black C5 1997 Silver RS Wiseco 8.8:1 Pistons(back to low compression!) Eagle Rods T3/T4 Turbo Custom FMIC Greddy Exhaust 390's Most current 1/8th mile time: 8.3@90mph 2.015 60'(Nitto Drag radials, i suck)

ok.. first off.. you people who are saying .95; whatever.. come on now. do yourself a favor and get a wideband setup. .95 is nothing but a narrow band calculation a wideband, furthernore, its not accurate!

wideband is 11.8

this setup is done. can't do anymore.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Remy	Jan-11-04 05:58 PM
Donating 2GNT member 6156 posts,

#63399, "RE: damnit 349whp..."
In response to Reply # 21

Impressive. I am gonna dyno my 20g next month. Hopefully my numbers look like yours emoji

MetalJimbo: Don't matter how ugly you are - all the girls love you in the titty bar

Member # 333

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

ner947	Jan-12-04 02:51 AM
Donating 2GNT member 3168 posts,

#63406, "RE: damnit 349whp..."
In response to Reply # 21

Originally posted by siueclipse
ok.. first off.. you people who are saying .95; whatever.. come on now. do yourself a favor and get a wideband setup. .95 is nothing but a narrow band calculation a wideband, furthernore, its not accurate! wideband is 11.8 this setup is done. can't do anymore.

yeah yeah yeah i know, you're 100% right... i have an assembled DIY-WB sitting in my garage i just need to scrounge up a few bucks to buy one of those honda oxygen sensors, kind of hard to do right now still trying to recover the bank account which is quite depleted from Christmas...

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-12-04 03:43 AM
Member since Nov 28th 2002 3504 posts,

#63407, "RE: damnit 349whp..."
In response to Reply # 23

i can get your a VW 7057 o2 sensors for 75 bux if you want one.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

PowerEclipses	Jan-12-04 06:17 AM
Donating 2GNT member 3215 posts,

#63416, "RE: damnit 349whp..."
In response to Reply # 24

Naw, there has to be something missing. Pushing 16 psi, What did you do to your head? Did you rebuild it at all? Did you oversize the valves? If not I would do that and put some monster cams in. I would also try and get more wieght off the crank. What ever you can, Might it be flywheel or w/e you can also knief edge the crank. Which will help.

Boca Raton, Florida
95 Eclipse GS- sold
99 Eclipse GSX- 386awhp
98 Eclipse GS- sold
92 Prelude

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-12-04 06:33 AM
Member since Nov 28th 2002 3504 posts,

#63417, "RE: damnit 349whp..."
In response to Reply # 25

Originally posted by PowerEclipses
Naw, there has to be something missing. Pushing 16 psi, What did you do to your head? Did you rebuild it at all? Did you oversize the valves? If not I would do that and put some monster cams in. I would also try and get more wieght off the crank. What ever you can, Might it be flywheel or w/e you can also knief edge the crank. Which will help.

im at 21lbs of boost. the head is completely built except for cams. valves are stock sized.

btw.. our cars have a knief edged crank already emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	Jan-12-04 08:20 AM
Donating 2GNT member 9740 posts,

#63424, "RE: damnit 349whp..."
In response to Reply # 26

Post the dyno sheet man.

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-12-04 09:57 AM
Member since Nov 28th 2002 3504 posts,

#63429, "RE: damnit 349whp..."
In response to Reply # 27

Originally posted by etx
Post the dyno sheet man.

i would if i had a scanner to do so. i used to have one but for some reason leaves nothing but lines in the scan.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

BigBald	Jan-12-04 10:01 AM
Member since Oct 22nd 2002 2715 posts,

#63431, "RE: damnit 349whp..."
In response to Reply # 28

Which 20g are you using? TD05H or the TD06H?

_____________________________________________
Jerrome B.
1995 GSX - Race
1997 GST - Drive
1995 GST - Who the hell knows

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

TXTurboGS	Jan-12-04 10:26 AM
Member since Sep 29th 2003 333 posts,

#63432, "RE: damnit 349whp..."
In response to Reply # 29

I got 299.6 WHP with the S16G(16psi), with 440cc injectors, emanage, and an fjo wideband o2 sensor. I was using the FMU, not the SFMU and I also have crane 16 cams. This leads me to believe that I would have well put around 310WHP. The tuners left my car running pig rich, with the wideband reading 10 all the time. Have in mind that the diaply cannot read 09 or 08. With your setup, it leads me to believe that my cars still has way more potential.

I am interested in what ring/disk combination you are using. BTW, my EGTs never go above 1200 F at WOT. Still man, those are good numbers, I am sure that with other cams you'll have the desired power.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-12-04 01:43 PM
Member since Nov 28th 2002 3504 posts,

#63440, "RE: damnit 349whp..."
In response to Reply # 30

only up to 1200? damn thats goooood. mine hit 1600. kinda sucks. im using the 2.72 disc/ring with bleed valve.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

widebodied	Jan-12-04 05:20 PM
Member since Oct 22nd 2002 2257 posts,

#63448, "RE: damnit 349whp..."
In response to Reply # 31

does yours ever rise about 1600 si?

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

TXTurboGS	Jan-12-04 06:23 PM
Member since Sep 29th 2003 333 posts,

#63450, "RE: damnit 349whp..."
In response to Reply # 32

WHat can I say. My car is a contradiction in many ways. I got some decent power running pig rich and my EGT's do not go above 1200 F.

The FJO wideband does not read below 10. You should really look into getting some better fuel management or even go with 500cc or something injectors for more power.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

thegame	Jan-13-04 12:57 AM
Member since Oct 08th 2002 1311 posts,

#63455, "RE: damnit 349whp..."
In response to Reply # 33

your egt's dont go above 1200*???? u sure your gauge is working properly? or am i just missing something here? shit... mine goes over 1200* just crusing. no boost.

14.5 @ 95mph / 7psi 185hp/180tq emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

ner947	Jan-13-04 02:54 AM
Donating 2GNT member 3168 posts,

#63456, "RE: damnit 349whp..."
In response to Reply # 34

1200 sounds too good to be true at that boost level. even with an insanely rich mixture it should still go well into 1500.

is your EGT probe after the turbo?

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-13-04 03:10 AM
Member since Nov 28th 2002 3504 posts,

#63458, "RE: damnit 349whp..."
In response to Reply # 33

Originally posted by TXTurboGS
WHat can I say. My car is a contradiction in many ways. I got some decent power running pig rich and my EGT's do not go above 1200 F. The FJO wideband does not read below 10. You should really look into getting some better fuel management or even go with 500cc or something injectors for more power.

really im going to have to see it to believe it. i can't believe your egt's are that low. pig rich should even give a higher temperature than normal. are you sure your egt gauge is working properly?

just cruising at 40mph i sit at 1250

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-13-04 03:09 AM
Member since Nov 28th 2002 3504 posts,

#63457, "RE: damnit 349whp..."
In response to Reply # 32

Originally posted by widebodied
does yours ever rise about 1600 si?

no, i hit red line just before 1600 degrees

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Remy	Jan-14-04 03:02 PM
Donating 2GNT member 6156 posts,

#63583, "RE: damnit 349whp..."
In response to Reply # 29

Originally posted by BigBald
Which 20g are you using? TD05H or the TD06H?

He is a 420a so I assume he has the hrc 20g since he didnt answer your question emoji

MetalJimbo: Don't matter how ugly you are - all the girls love you in the titty bar

Member # 333

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jan-14-04 03:52 PM
Member since Oct 23rd 2003 340 posts,

#63596, "RE: damnit 349whp..."
In response to Reply # 38

I think HRC makes both the TD05 and TD06 versions of thier Super 20G.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Skrilla	Jan-13-04 04:50 AM
Donating 2GNT member 1868 posts,

#63461, "RE: damnit 349whp..."
In response to Reply # 26

Originally posted by siueclipse

Originally posted by PowerEclipses Naw, there has to be something missing. Pushing 16 psi, What did you do to your head? Did you rebuild it at all? Did you oversize the valves? If not I would do that and put some monster cams in. I would also try and get more wieght off the crank. What ever you can, Might it be flywheel or w/e you can also knief edge the crank. Which will help.

im at 21lbs of boost. the head is completely built except for cams. valves are stock sized. btw.. our cars have a knief edged crank already emoji

Bullshit.

HRC was saying this too. Technically sure maybe it can be considered knifedged but an actual crank knifing removes metal from the crank for one of two reasons or both.

1. To stop the crank from flinging around the oil into a cloud creating a lack of pressure (problem can obviously be helped by a baffle/windage tray or the shitty term the crank scrapper)

2. Reduce reciprocating mass in an effort to relieve the engine and aquire additional HP and MUCH quicker revving motor.

The reason the crank can be considered knifedged stock is the fact that it doesn't have the typical smooth curves of other standard cranks BUT a real knifedged 420a Crank can have anywhere between 10-15lbs of metal machined away. I've seen both methods. The lighter crank I would not say is a stout and I would use it for NA purposes only. Mike of RRE has pics of Eric R.'s knifedged crankshaft.

The knifeded crank is like lightening our flywheel times 2

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by YourInMyMirror95GS
dick teaser's should be rounded up and shot in the forehead

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon! emoji

Originally posted by Dark0ne
Thanks. Now excuse me while i fuck your sister.

"fuck all motor" -turbo ate you

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-13-04 05:09 AM
Member since Nov 28th 2002 3504 posts,

#63462, "RE: damnit 349whp..."
In response to Reply # 40

well damn dude, no reason to get offensive. its still a knife edged crank. maybe not a efficient one, but nonetheless it is.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

turbo8u	Jan-13-04 06:55 AM
Member since Jun 15th 2003 10552 posts,

#63468, "RE: damnit 349whp..."
In response to Reply # 41
Jan-13-04 06:56 AM by turbo8u

thanks for that info skrilla you learn something new everyday

_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

Originally posted by sarahdr1665
...some girls like the "nerdy" guys

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	Jan-13-04 07:02 AM
Donating 2GNT member 9740 posts,

#63469, "RE: damnit 349whp..."
In response to Reply # 42

Post your dyno sheet, take your ass to kinkos. Do it at work. Trace it with ms paint. Do it.

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

TXTurboGS	Jan-13-04 08:29 AM
Member since Sep 29th 2003 333 posts,

#63475, "RE: damnit 349whp..."
In response to Reply # 43

I am going to take some pics of my car at full 16psi with both the EGT and boost gaugues on focus. My egt probe is welded into the manifold and not after the turbo. I am no BS anyone. I'll post some pics soon.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Initial DSM	Jan-13-04 01:20 PM
Member since Sep 23rd 2003 2833 posts,

#63492, "RE: damnit 349whp..."
In response to Reply # 44

James what axles did you get?

and get an e-manage or something at least to tune all that power correctly; megasquirt whatever etc...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-13-04 02:16 PM
Member since Nov 28th 2002 3504 posts,

#63494, "RE: damnit 349whp..."
In response to Reply # 45

Originally posted by Initial DSM
James what axles did you get? and get an e-manage or something at least to tune all that power correctly; megasquirt whatever etc...

i purchased driveshaftshop.com's stage 2 axles.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

95redesi	Jan-13-04 02:40 PM
Member since Nov 25th 2003 328 posts,

#63495, "RE: damnit 349whp..."
In response to Reply # 46

hahahah .. your complaining with that whp... i have the stock 105 or whatever... wanna race?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Eclipse2NR	Jan-13-04 05:25 PM
Member since Nov 25th 2002 581 posts,

#63506, "RE: damnit 349whp..."
In response to Reply # 47

Awesome numbers man. You'll hit 400, I'm sure. 21 psi on pump gas is only a dream for me still, as it is for many of us. Every time I drive my girlfriends WRX I want to beat the shit out of my car and run it off a cliff. Anywho, I really think the cams are going to do some real magic for you, and like you and others have said, you should start thinking about a more exotic fuel system. Congrats on great dyno's and a badass car. I'm gonna go stare at my engine with the valve cover off for a while and get depressed.

1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / More at http://home.insightbb.com/~mgalyan/
Mark Galyan - Indianapolis, Indiana

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-13-04 05:30 PM
Member since Nov 28th 2002 3504 posts,

#63507, "RE: damnit 349whp..."
In response to Reply # 48

thanx bud

oh.. and for those of you who just want me to post a dyno sheet and are kinda acting like assholes about it.. you people can blow me, im not coming to this website to try and impress the internet world. it doesn't make me feel any better or special. and no im not going to run to kinkos and spend an hour or two getting an image of this just so i can prove what i run. i dont care that much about how much you believe me. for those of you who have seen my car at the 2gnt meet in chicago, you should know what my car is capable of.

J

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jan-14-04 03:45 AM
Member since Oct 23rd 2003 340 posts,

#63518, "RE: damnit 349whp..."
In response to Reply # 49

How hard is it to scan a dyno sheet at kinkos? Not to mention the fact that don't you sell computer hardware? hell take a digital picture of it and post that. You have digital photos and video of your car computer so why don't you take a video of the dyno run? I don't think people are being assholes if they are asking to see your dyno sheet. When someone posts up good hp numbers people want to see what the dyno sheet looks like thats all. If I were you I would not take what people say here as a reason to get defensive when you clearly have the dyno sheet. I would take it more as a compliment that people want to see the sheet.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Skrilla	Jan-14-04 04:19 AM
Donating 2GNT member 1868 posts,

#63525, "Where is your dyno!!"
In response to Reply # 49

Originally posted by siueclipse
thanx bud oh.. and for those of you who just want me to post a dyno sheet and are kinda acting like assholes about it.. you people can blow me, im not coming to this website to try and impress the internet world. it doesn't make me feel any better or special. and no im not going to run to kinkos and spend an hour or two getting an image of this just so i can prove what i run. i dont care that much about how much you believe me. for those of you who have seen my car at the 2gnt meet in chicago, you should know what my car is capable of. J

...I'm justa playin' emoji

I wasn't trying to be offensive with my post about the knifedge crank earlier I know people can't read emotions on the internet so I have to watch myself, sorry about that.

On another note, I think your accomplishments are quite impressive and it's badass to have made your ride, your pride and joy, into something fast and enjoyable, your ride is sick, keep up the work dude

, BTW I think your injectors are just about maxed out. my line pressure was 100PSI at 90% duty cycle once I did some adjusting, and that is the danger zone(needs to be 80%max but you may already know that). Anyway I always hated hearing what other people told me to do with my ride (opinions are like assholes...you know the rest) so I mean this as only a suggestion. One more thing I've never tried it myself but the 550cc I have personally SEEN work on our cars with the AFC at -50% at 1000rpms. That could help if you aren't looking to go with anything too expensive in the fuel department.

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by YourInMyMirror95GS
dick teaser's should be rounded up and shot in the forehead

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon! emoji

Originally posted by Dark0ne
Thanks. Now excuse me while i fuck your sister.

"fuck all motor" -turbo ate you

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bullox	Jan-14-04 04:23 AM
Donating 2GNT member 6702 posts,

#63526, "RE: Where is your dyno!!"
In response to Reply # 51

I was at the Chicago meet - James is not messing around. That's all I have to say.

Good work mang keep it up

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-14-04 04:54 AM
Member since Nov 28th 2002 3504 posts,

#63530, "RE: Where is your dyno!!"
In response to Reply # 52

Well, Im not going to continue this conversation about posting a dyno sheet. Fact is, I don't have a camera, I borrow a buddies when i want to do stuff and Im not going to spend an hour of my day just to prove it. Next time I have the availability to get the dyno sheet scanned, I will.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jan-14-04 06:18 AM
Member since Oct 23rd 2003 340 posts,

#63541, "RE: Where is your dyno!!"
In response to Reply # 53

You have to understand that some people might be skeptical about 350hp on pump gas. It's not that they don't believe you but they would like to have a referrence when someone else raises a BS flag. You have to remember that we drive the 420a so when someone makes enough power to brag about to a 4G63 or V-8 person they would like to have backup to prove it. I personally just wanted to see it just to see your curve. Just whenever you get time is cool, there is no hurry.

Also, Don't get so defensive were all friends here emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

corsagsbo	Jan-14-04 06:48 AM
Old School 2GNTer 390 posts,

#63542, "RE: Where is your dyno!!"
In response to Reply # 54

I'd personally like to see the graph with back to back runs.. consistancy of the curves over the revs and a/f readings tell a whole hell of allot as to what may be limiting your numbers. However, from what I hear we may have a nice remedy utilizing 500cc injectors soon.

boosted 420a and ej2o..(my 2liter v8 eaters)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jan-14-04 07:05 AM
Member since Oct 23rd 2003 340 posts,

#63543, "RE: Where is your dyno!!"
In response to Reply # 55

I would think the pump gas would be the biggest limiting factor. Although that turbo is not really good for that much hp even with c16. I think Armond maxed his out at 400hp on race gas and that was at 29psi.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	Jan-14-04 07:31 AM
Donating 2GNT member 9740 posts,

#63545, "RE: Where is your dyno!!"
In response to Reply # 56

He's talkin about me. I never said I don't believe you, I just said post the dyno sheet. Relax. My car is making a lot of power too, I know it's possible, I don't have any reason to doubt you.

Gimme your address, I'll fedex you some xanax. emoji

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

corsagsbo	Jan-14-04 07:31 AM
Old School 2GNTer 390 posts,

#63546, "RE: Where is your dyno!!"
In response to Reply # 56

I've seen numbers in the upper 350's on a local neon with 94 in the tank. I'm sure a little more can be had with his set up. Granted, I usually run a little Sunoco "red" above 18psi.

boosted 420a and ej2o..(my 2liter v8 eaters)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Therein10	Jan-14-04 08:29 AM
Member since Feb 02nd 2003 83 posts,

#63552, "RE: Where is your dyno!!"
In response to Reply # 54
Jan-14-04 08:33 AM by Therein10

Why is it so hard to believe. Just becasue your car doesn't dyno 350. Again if you do things right the first time instead of just buying bolt on crap and trusting it to do the job. Study up and do some of the equations that are given to you in books. I wasn't about to wait for some company to come out with a fuel system, we took facts and created our own fuel system. Where once again I am running 28psi on 91 octane with no problems and a good strong tune. I'm not going to claim any horsepower numbers because I havent been to the dyno yet. However I have raced a supercharged mustang that ran 12.3 at 113 and i pulled him pretty good and at the time I was only running 24psi. I thought this site was here to help each other out, not to brag about who's the best and if someone is better than someone else, then we won't believe them without proof. Instead why don't you ask him how he got 350HP and what you need to do to do the same. I believe him I just think that if he wants more HP, than turn the Boost up.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

corsagsbo	Jan-14-04 08:43 AM
Old School 2GNTer 390 posts,

#63553, "RE: Where is your dyno!!"
In response to Reply # 59
Jan-14-04 08:43 AM by corsagsbo

I think everyone here believes him.... or did I miss something?

boosted 420a and ej2o..(my 2liter v8 eaters)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jan-14-04 09:59 AM
Member since Oct 23rd 2003 340 posts,

#63560, "RE: Where is your dyno!!"
In response to Reply # 60

Exactly I never said I did not believe him. And I do know how he got to where he is because I have read his mods list. Honestly now that your have said that you ran 28psi I would not mind seeing your dyno sheet. Running that high of boost especially on our motors with 94 octane is insane. Maybe if you stopped kissing his ass long enough to read our posts you would realize that we all believe him we just want to see the dyno sheet to see where the stats are at when he is pulling that HP.

Sorry siueclipse, noone was doubting you I would just like to brag about the hp these cars are capable of. You have a really nice setup and lots of power. I just have a few friends who are giving me a bit of shit and I wanted to show them. Also trying to get an idea of where I'll be when I start building the car up next season. Sorry a few of the groupies turned this into a "proof" thread.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Z87RSMan	Jan-14-04 12:42 PM
Member since Mar 07th 2002 2188 posts,

#63572, "RE: Where is your dyno!!"
In response to Reply # 61

Well I know Dino's car is running pretty well right now with the Gen 6 DFI and 625 cc injectors. That could be a thought. Does VT make cams for yall yet? They made some cams for us that they put on a boosted 4.6 that netted an 86 rwhp gain. I imagine if they have some for yall they might do really well, enough possibly to push Crane around.

Luke

1998 Mustang GT 5-speed
2002 Lone Star Shelby Cobra Replica

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mattchew	Jan-14-04 02:46 PM
Member since Oct 23rd 2003 340 posts,

#63580, "RE: Where is your dyno!!"
In response to Reply # 62

Crane makes cams for our cars but we wont see near the gains from cams that the 4.6 would. Still a nice power adder when your running out of options.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	Jan-16-04 03:31 PM
Donating 2GNT member 9740 posts,

#63721, "RE: Where is your dyno!!"
In response to Reply # 62
Jan-16-04 03:32 PM by etx

Originally posted by Z87RSMan
Well I know Dino's car is running pretty well right now with the Gen 6 DFI and 625 cc injectors. That could be a thought. Does VT make cams for yall yet? They made some cams for us that they put on a boosted 4.6 that netted an 86 rwhp gain. I imagine if they have some for yall they might do really well, enough possibly to push Crane around.

Yeah VT works with crane on thier custom work. No need for us to have custom high lift grinds unless the car is drag only.

Edit: Or if your name is Michael_97RS. emoji

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

widebodied	Jan-14-04 05:07 PM
Member since Oct 22nd 2002 2257 posts,

#63602, "RE: Where is your dyno!!"
In response to Reply # 59

Originally posted by Therein10
Why is it so hard to believe. Just becasue your car doesn't dyno 350. Again if you do things right the first time instead of just buying bolt on crap and trusting it to do the job. Study up and do some of the equations that are given to you in books. I wasn't about to wait for some company to come out with a fuel system, we took facts and created our own fuel system. Where once again I am running 28psi on 91 octane with no problems and a good strong tune. I'm not going to claim any horsepower numbers because I havent been to the dyno yet. However I have raced a supercharged mustang that ran 12.3 at 113 and i pulled him pretty good and at the time I was only running 24psi. I thought this site was here to help each other out, not to brag about who's the best and if someone is better than someone else, then we won't believe them without proof. Instead why don't you ask him how he got 350HP and what you need to do to do the same. I believe him I just think that if he wants more HP, than turn the Boost up.

i would like to know your fuel setup/turbo setup sir.

i myself want to tune for 20-22lbs daily
DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Jan-15-04 01:12 AM
Member since Jul 22nd 2002 1120 posts,

#63612, "RE: Where is your dyno!!"
In response to Reply # 65

I'm running DSM 450CC injectors just fine off my stock ECU...

And I only need -12 adjustment on the SAFC at 1000 rpm.... and no it;s not set at -12 for the rest of the rpm band.... emoji

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-15-04 05:30 AM
Member since Nov 28th 2002 3504 posts,

#63623, "RE: Where is your dyno!!"
In response to Reply # 66

Originally posted by MrSlick
I'm running DSM 450CC injectors just fine off my stock ECU... And I only need -12 adjustment on the SAFC at 1000 rpm.... and no it;s not set at -12 for the rest of the rpm band.... emoji

you are going to blow up your injector drivers in your ecu unless you have the resistor pack in place. do you?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Jan-15-04 05:57 AM
Member since Jul 22nd 2002 1120 posts,

#63626, "RE: Where is your dyno!!"
In response to Reply # 67

Originally posted by siueclipse

Originally posted by MrSlick I'm running DSM 450CC injectors just fine off my stock ECU... And I only need -12 adjustment on the SAFC at 1000 rpm.... and no it;s not set at -12 for the rest of the rpm band.... emoji

you are going to blow up your injector drivers in your ecu unless you have the resistor pack in place. do you?

Yupp, custom resistor packs... as far as the ewcu is concerned its driving regular 13 ohm saturated injectors... but they be 450cc peak and hold....

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-16-04 04:15 AM
Member since Nov 28th 2002 3504 posts,

#63688, "RE: Where is your dyno!!"
In response to Reply # 68

yeah i didn't see who responded to that. if id of seen your name i wouldn't have bothered asking emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MajinVejitaXV	Jan-16-04 09:24 AM
Member since Nov 19th 2002 446 posts,

#63698, "RE: damnit 349whp..."
In response to Reply # 0

Is there any way you can post your setup (2.0L block, right?)? I'm curious as to what all you have that's enabling you to make these numbers...

I would check your site, but like you already know, it's down emoji

Thanks,
Corey

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

siueclipse	Jan-18-04 05:10 PM
Member since Nov 28th 2002 3504 posts,

#63774, "RE: damnit 349whp..."
In response to Reply # 70

Originally posted by MajinVejitaXV
Is there any way you can post your setup (2.0L block, right?)? I'm curious as to what all you have that's enabling you to make these numbers... I would check your site, but like you already know, it's down emoji

Thanks, Corey

i will in a day or two. i pulled my motor out tonight to replace rear main seal and to put in my bigger axles. give me a day and i will. its a long list.

James

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

grain	Jan-19-04 01:18 PM
Donating 2GNT member 2551 posts,

#63819, "RE: damnit 349whp..."
In response to Reply # 71

good to hear ya got the axles james. i might be going into carbondale sometime in the summer. we will have a good race, cause ill be pusshing some good numbers aswell. and ill have a new d/p, (one that dosent crack in half) anyways.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

2GNT Technical

Turbo/Nitrous Tech

topic #63355

Previous topic | Next topic

Generated in 0.112 seconds, executing 158 queries.