okay, i dont like the looks of the 90* black silicone elbow off the compressor so:

Do you think a regular red silicone elbow from somplace like RRE would stand up to the heat of a ceramic coated manifold( radiated heat would be approx. 70*), possibly even with a heatsheild?
or
how about an aluminum 90* elbow welded onto the compressor?
or
this, clocking the compressor to point downward and customizng the wastegate and piping to work with that.

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

i dont have any problems with my hrc elbow.. till i blew it off at 22lbs of boost on the 20g.. i say don't bother spending the extra money.

I've also contemplated on this situation, too. I've had the HRC elbow blew out on me once due to it drying up from the exhaust heat and high boost. Personally, I'd recommend clocking the turbo to point down and modify your i/c pipe routing--which is what I plan to do sometimes this winter. It will be a much cleaner looking setup.

If you opt to go with welding on an elbow to the compressor outlet, then it's on there, so you'd be stuck with the elbow pointing to which ever direction. And if you ever change your mind with that setup or decide to change the turbo, it'd be hard to sell the turbo like that. Plus, for the price of a new silicone elbow, have a threaded spacer or nut tack welded to the turbo so that you could mount the wastegate actuator, once the turbo has been clocked--free if you know anyone that has a MIG welder. Just my .02

___________
Kon C

"Sometimes, a man has to do what a man has to do."

i have a mig welder

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Originally posted by siueclipse

Originally posted by tim97rs i have a mig welder

i dont think you can make a 14b into another turbo..

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Originally posted by siueclipse

Originally posted by tim97rs i have a mig welder

i dont think you can make a 14b into another turbo..

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

>>Actually you'd need a TIG welder, not a MIG.... You need
>>a TIG to weld Aluminum....

Actually, that's not true at all. I weld Aluminum all day long with MIG.


Tim- I got an elbow at www.TurboHoses.com. Use t-bolt clamps and it won't come off.

I need a new elbow too. It's still rockin the radiator hose, heh. What size is that elbow? 2.25 inches? I just want to be sure, so I don't order the wrong one.

____________________________________________________
four nails four corners four riders and four horses

The HRC turbo elbow is 2"

___________
Kon C

"Sometimes, a man has to do what a man has to do."

I bought a silicone elbow from http://www.extrememotorsports.com/g@cat/hoses.htm I am not sure about the size but it is a 7 layer silicone elbow. Very strong.



98 GS
HRC Stage II
14.852@94.43
http://members.cardomain.com/lonnie1977

____________________________________________________
four nails four corners four riders and four horses