#61687, "Need help on hooking up with fuel system"
Ok here is what i have no inline pump... walbro 255, 30lb injectors, and the sfmu... ok i have the supply all hooked and configured.... now where do i go with the return..... I don;t have the setup like the HRC kit... with going all the way back.... so where do i tap into the return... run a line back or is there an easier way... and i also don;t have the fuel setup from hrc so that is why i went this way... thanks....
#61688, "RE: Need help on hooking up with fuel system" In response to Reply # 0
look up whodatt's sfmu write up on the sfmu install. its on the mods page, and he has a lot of pics so you know where the fuel return line will be.
fuel return line: open up the tank access panel in the rear seats. you will see a hard line (thats coming from the tank-that the feed line), and the soft line (its maller-that the return line). on port at the bottom of the sfmu, that's the return line. you run a line under the car, then connect this to the soft line, and that will be your new return line. look around the car for a while and you will know what i mean, but check out whodatts write up too.
#61691, "RE: Need help on hooking up with fuel system" In response to Reply # 1
ok so i do have to run a line... i thought for some reason there was another way of doing it without running it all the way back... i guess i was confused with it... Thanks bro.....
Search
Printer-friendly copy
1 User in Chat
